Curtis CR2606 Manuel utilisateur

UNDERCOUNTER CD CLOCK RADIO

MODEL NO. CR2606

OWNER'S MANUAL

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

TIMER

MHz

JAZZ

SLEEP

SAFETY PRECAUTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol within an equilat-

eral triangle is intended to alert the user to the presence of

uninsulated 'dangerous voltage' within the product's enclo-

sure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within an equilateral triangle is intend-

ed to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

DANGER:

Invisible and hazardous laser radiation when open and inter-

lock failed or defeated. Avoid direct exposure to beam.

FCC WARNING:

This equipment may generate or use radio frequency energy. Changes

or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in the instruction man-

ual. The user could lose the authority to operate this equipment if an

unauthorized change or modification is made.

LASER SAFETY: This unit employs a laser. Only qualified service per-

sonnel should attempt to service this device due to possible eye injury.

CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFOR-

MANCE PROCEDURE HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN

CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PUR-

CHASE OR CURTIS.

PREPARATION FOR USE

Unpacking and Setup

AC Operation

Unwind the AC cord and extend it to its full length. Insert the AC cord into any

convenient AC 120V~60Hz household outlet.

Carefully remove the unit from the display carton and remove all packing

material from the unit itself.

LOCATION OF CONTROLS

1. POWER BUTTON

2. SLEEP BUTTON

3. TIMER BUTTON

4. FUNCTION BUTTON

5. REMOTE SENSOR

6. MEM/CLK SET BUTTON

7. MEM DN BUTTON

8. REPEAT BUTTON

9. SKIP/TUNE DN BUTTON

10. SKIP/TUNE UP BUTTON

11. VOL UP BUTTON

12. VOL DN BUTTON

13. OPEN/CLOSE BUTTON

14. BAND BUTTON

15. PLAY/PAUSE BUTTON

16. EQ BUTTON

17. MEM UP BUTTON

18. CD DOOR

19. DISPLAY BUTTON

20. FM ST BUTTON

21. STOP BUTTON

22. AUDIO IN (REAR OF UNIT)

23. BACKUP BATTERY SLOT

(SIDE OF UNIT)

TIMER

MHz

JAZZ

SLEEP

1 2 3 4 5 6 7 8 9 10

1314

19 20

2223

LOCATION OF REMOTE CONTROLS

1. POWER BUTTON

2. STOP/BAND BUTTON

3. SKIP/TUNE DN BUTTONS

4. PLAY/PAUSE BUTTON

5. REPEAT BUTTON

6. PROG/MEM. BUTTON

7. FM ST BUTTON

8. TIMER BUTTON

9. DISPLAY BUTTON

10. VOLUME DN BUTTON

11. SKIP/TUNE UP BUTTON

12. VOLUME UP BUTTON

13. MUTE BUTTON

14. OPEN/CLOSE BUTTON

15. EQ BUTTON

16. FUNCTION BUTTON

6 7 8 9

1516

POWER SOURCES

BATTERIES

NOTE:

The button cell battery contains mercury, don't put in the trash. Recycle or

dispose as hazardous waste.

NOTE:

You may need to remove a protective covering from the remote's battery

compartment before using the remote control.

(FOR REMOTE CONTROL)

OPERATING INSTRUCTIONS

Setting up your radio

For instructions on mounting your radio, see the mounting template that

came with your radio.

Checking AM Radio reception

Your clock radio has a built-in antenna for AM radio. To improve reception,

you need to rotate your clock radio.

Before you mount your clock radio under a counter, tune to an AM station

and rotate your clock radio until you get the best reception.

This is the orientation you need to use when you mount your clock radio.

For more information, see "Improving reception" on page 10.

Installing the backup batteries

Your clock radio uses two AAA backup batteries that store your settings.

You cannot use the batteries to power your clock radio. If your clock radio

does not save your settings, you may need to replace the batteries.

To install the backup batteries:

1. Open the battery compartment located on the left side of your radio.

2. Insert two AAA batteries (not included) into the battery compartment.

Make sure that the + and - symbols on the batteries align with the +

and - symbols in the battery compartment.

3. Close the battery compartment.

OPERATING INSTRUCTIONS

To turn on your radio:

1. Plug the AC Power cord into a power outlet.

2. Press the POWER button to turn on the radio.

Setting the time

To set the time on your radio:

1. With the power off.

2. Press and hold the MEM/CLK SET Button; "12Hr" will blink.

3. Press the SKIP/TUNING Button to set the unit to the 24 hour (24Hr) mode

or 12 hour (12Hr) mode.

4. Press the MEM/CLK SET Button and the hours will blink.

5. Press the SKIP/TUNING Button to set the current hour, then press the

MEM/CLK SET again; the minute digits will blink. Press the SKIP/TUNING

to set the current minutes.

6. Press the MEM/CLK SET Button to confirm the time.

To set the kitchen timer:

1. Press the TIMER button one or more times to select a length of time

in minutes. The initial time is 240 minutes. Each time you press the

TIMER Button, the length of time decreases by 10 minutes.

2. To increase or decrease the length of time from one to nine minutes,

press one of the SKIP/TUNING Button one or more times. Each time

you press a SKIP/TUNING Button the length of time increase or decrease

by one minute.

3. When the alarm sound go on for approximatly 8 seconds, press the

TIMER to turn off alarm.

4. To cancel the timer, press the TIMER Button for five seconds.

To activate sleep function:

Press the SLEEP button and "90" will appear and set the unit to turn off after

90 minutes.

Each time you press the SLEEP button, the length of time decreases

by 10 minutes.

2. After five seconds, the Sleep function will activate and the SLEEP indicator will light

solid. Pressing the SLEEP button again until "OFF" appears and turns off the Sleep

feature.

Using your radio

OPERATING INSTRUCTIONS

To listen to your radio:

1. Press the POWER Button to turn on your radio.

2. Press the FUNCTION Button one or more times until TUNER appears on

the display.

3. Press the BAND Button to select AM or FM.

4. Press and hold one of the SKIP/TUNING Buttons to go to an available

radio station.

5. Press one of the VOLUME Buttons to adjust the volume.

Improving reception:

Your clock radio has an FM antenna on the back. If you are listening to an FM

station and the reception is poor, move the antenna until reception improves.

If you are listening to an AM station and reception is not clear, rotate your radio

slightly until reception improves.

Programming radio station presets:

You can program as many as 10 FM and 10 AM radio station presets. After you

program a station, you can tune to the station by pressing one of the SKIP/TUNE

Buttons.

To program a radio station:

1. Press the POWER Button to turn on your radio.

2. Press the FUNCTION Button one or more times until TUNER appears

on the display.

3. Press the BAND Button to select AM or FM.

4. Press and hold one of the SKIP/TUNE Buttons to select a radio station.

5. Press and hold the MEM/CLK SET Button to activate the programming

mode.

6. Press one of the SKIP/TUNING Buttons to select the preset number you

want to assign the station to.

7. Press the MEM/CLK SET Button to store the station with the preset number

you selected.

8. Repeat Steps 4 through 7 to program additional presets.

OPERATING INSTRUCTIONS

To tune to a radio station preset:

1. Press the POWER Button to turn on your radio.

2. Press the FUNCTION button one or more times until TUNER appears on

the display.

3. Press the BAND Button to select AM or FM.

4. Press the MEM DN or MEM UP Button one or more times until the preset

number you want appears on the display.

To select an equalizer mode:

Press the EQ Button one ore more times to select the mode you want

You can select:

* Classic

* Jazz

* Rock

* Pop

To Listen to a CD

Your radio can play audio CDs, CD-Rs and CD-RWs. CD-Rs and CD-RWs

must be finalized before you can play them on your radio.

To listening to a CD:

1. Press the POWER Button to turn on your radio.

2. Press the FUNCTION Button one or more times until "--" appears on

the display.

3. Press the OPEN/CLOSE Button to open the CD tray.

4. Place a CD with the label side up into the CD tray.

5. Press the OPEN/CLOSE Button to close the CD tray.

6. Press the PLAY/PAUSE Button to start playback.

7. To control the CD during playback:

* Press the PLAY/PAUSE Button to pause playback. Press the button

again to resume playback.

* Press one of the SKIP/TUNING Buttons to go to the next or previous

track on the CD.

* Press and hold one of the SKIP/TUNING Buttons to search for a track

on the CD.

8. Press the STOP Button to stop playback.

Table des matières

Autres manuels Curtis Radio-réveil

Curtis

Curtis KCR2609UK Manuel utilisateur

Curtis

Curtis IP250 Manuel utilisateur

Curtis

Curtis KCR2606 Manuel utilisateur

Curtis

Curtis CR1345 Manuel utilisateur

Curtis

Curtis iMODE IP2604UK Manuel utilisateur

Curtis

Curtis CR4947 Manuel utilisateur

Curtis

Curtis RCD122UK Manuel utilisateur

Curtis

Curtis CR1320 Manuel utilisateur

Curtis

Curtis CR4975 Manuel utilisateur

Curtis

Curtis CR-750 Manuel utilisateur

Curtis

Curtis KCR2610 Manuel utilisateur

Curtis

Curtis CR1336 Manuel utilisateur

Curtis

Curtis RCD3830 Manuel utilisateur

Curtis

Curtis KCR2611UK Manuel utilisateur

Curtis

Curtis RCD313 Manuel utilisateur

Curtis

Curtis cr1274 Manuel utilisateur

Curtis

Curtis CR4940 Manuel utilisateur

Curtis

Curtis KCR2622UK Manuel utilisateur

Curtis

Curtis CR1338 Manuel utilisateur

Curtis

Curtis CR-1274 Manuel utilisateur

Curtis

Curtis KCR2607 Manuel utilisateur

Curtis

Curtis KCR2620 Manuel utilisateur

Curtis

Curtis CR4966 Manuel utilisateur

Curtis

Curtis KCR2610 Manuel utilisateur

Manuels Radio-réveil populaires d'autres marques

Denver

Denver CRQ-105 Manuel utilisateur

Audiovox

Audiovox CE90 Manuel utilisateur

Sony

Sony Dream Machine ICF-C763L Manuel utilisateur

Sanyo

Sanyo DMP-P6 Manuel utilisateur

RCA

RCA RPC100 Manuel utilisateur

Yamaha

Yamaha ISX-80 Manuel utilisateur

Pyle

Pyle PLMR20W Manuel utilisateur

Blaupunkt

Blaupunkt CR7BK Manuel utilisateur

Philips

Philips AJ3180 Manuel utilisateur

HoMedics

HoMedics SS-5500-2EU Manuel utilisateur

RCA

RCA RC66i Manuel utilisateur

Versaudio

Versaudio Vers Manuel utilisateur

SOUNDMASTER

SOUNDMASTER UR8100 Manuel utilisateur

Audiovox

Audiovox CE90 Manuel utilisateur

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Manuel utilisateur

Roberts

Roberts ChronoDAB Manuel utilisateur

AEG

AEG MRC 4132 BT Manuel utilisateur

Tokai

Tokai TC-155 Manuel utilisateur