CTX PV880 Manuel utilisateur
English
1
Usage Notice
Precautions ................................................................................. 2
Introduction
About the Product ....................................................................... 3
Package Overview...................................................................... 4
Installation
Product Overview........................................................................ 5
Start Your Installation .................................................................. 7
User Controls
Front Bezel Controls ................................................................... 9
How to Use the OSD Menus....................................................... 11
On-Screen Display Menus ......................................................... 12
Appendices
Troubleshooting........................................................................... 15
Product Dimensions ................................................................... 16
Compatibility Modes ................................................................... 17
Table of Contents
2
English
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recom-
mended in this user’s manual to maximize the life of your unit.
Do:
!Turnofftheproductbeforecleaning.
!Use only a dry soft cloth or clean room wiper when cleaning the
LCDpanelsurface.
!Use a soft cloth moistened with mild detergent to clean the
displayhousing.
!Useonly highqualityand safety approvedAC/DC power
adapter.
!Disconnect the power plug from AC outlet if the product is not
usedforalongperiodoftime.
Don’t:
!Do not touch the LCD panel surface with sharp or hard objects.
!Donot use abrasive cleaners,waxesorsolvents for your
cleaning.
!Donot operate the productunderthe following conditions:
-Extremelyhot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
-Near any appliance generatingastrong magnetic field.
- Place in direct sunlight.
English
3
Introduction
AbouttheProduct
Having a 18.1” flat panel screen with an active matrix, thin-film transistor
(TFT) liquid crystal display (LCD) , this product also demonstrates
following outstanding features.
!Directanalog RGB input
!18.1”diagonal screen size
!16.7milliondisplayable colors
!1280x 1024 high resolution
!SXGA/ XGA/ SVGA/ VGA/ VESA/ Mac/ SunMicro Workstation/
NECPC-98 compatible
!24~80kHzhorizontal scan
!56~76Hzhighrefreshrate
!Auto adjustment capability
!Highquality full screen re-scaling
!MultilingualOSD menus in fivelanguages:English, French,
German,Spanish, andItalian
!VESA DDC 1/2B data communication
!VESADPMS power saving
!Dualsignal input
!USB hub with 1 upstream and 4 downstream ports on the
standbase
!Stand with tilt and swivel functions
!Kensingston lock capability
4
English
Package Overview
LCDDisplay
VGASignal Cable
USBUpstreamCable
InstallationDiskette
(forDDC1/2B)
PowerAdapter
PowerCord
User’sManual
WarrantyCard Mac Mutliform
Adapter(optional)
English
5
Power
Installation
ProductOverview
"MainUnit
LCDDisplay
Stand User Controls
"Connection Ports
Display Rear Connectors
Display Input-B
DC Power-In
Display Input-A
6
English
Display Stand Back USB Hub Ports
USBUpstream Port
4 USB Downstream Ports
English
7
StartYourInstallation
Notice: To ensure the LCD display can work well with your computer,
please configure the display mode of your graphic card to make it
less than or equal to 1280 x 1024 resolution and make sure
timing of the display mode is compatible with the LCD display.
We have listed the “Compatibility Modes” of this LCD display in
appendices for your reference.
* For Macintosh, use the Mac adapter.
VGA Cable
Power Adapter
Power Cord
Mac Adapter *
"Connecting the Display
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is off.
2. Connect the VGA signal cable from display input-A or display input-B
connector to the 15-pin connector of your host computer and tighten the
screws.
3. Connect the DC power cord to the power connector; plug one end of the
AC power cord into the power adapter, and then the other end into an
electrical outlet.
8
English
"USB Hub Port Descriptions
#
$
$USB Downstream Ports
These four USB ports are available for connecting USB type peripheral
devices such as keyboard, mouse, printer and so on.
#USB Upstream Port
This Port is for connecting the USB Upstream cable to computer’s or
other hub’s USB port.
English
9
UserControls
FrontBezelControls
No./ Icon Control Function
$MENU Menu button To pop up the OSD menus.
#SELECT/AUTO Select/Auto
Select
- To select the adjust-
ment items from OSD menus.
Auto
- To activate the “Auto
Adjustment” function to obtain
an optimum image.
%!Brightness Minus/Minus 1.Decreases the brightness of
the display image.
2.Decreases value of the
adjustment items.
&"Brightness Plus/Plus 1.Increases the brightness of
the display image.
2.Increases value of the
adjustment items.
$#%&'
(
10
English
'Power LED 1. Green indicates the display is
turned on.
2. Amber indicates the display in
power-saving mode.
(Power Switch Switches on/off the power of the
LCD display.
Table des matières
Autres manuels CTX Moniteur
CTX
CTX PL7 Manuel utilisateur
CTX
CTX PV520A Manuel utilisateur
CTX
CTX MS700U Manuel utilisateur
CTX
CTX PV411S Manuel utilisateur
CTX
CTX S500 Manuel utilisateur
CTX
CTX PR1400F Manuel utilisateur
CTX
CTX PV500A Manuel utilisateur
CTX
CTX S762A Manuel utilisateur
CTX
CTX S720 Manuel utilisateur
CTX
CTX E22M5G Manuel utilisateur
CTX
CTX M730V Manuel utilisateur
CTX
CTX S700 Manuel utilisateur
CTX
CTX PV510 Manuel utilisateur
CTX
CTX EX-710F Manuel utilisateur
CTX
CTX VL700 Manuel utilisateur
CTX
CTX PV722E Manuel utilisateur
CTX
CTX PR700 Manuel utilisateur
CTX
CTX X50 Manuel utilisateur
CTX
CTX PV520 Manuel utilisateur
CTX
CTX PV722E Manuel utilisateur
