Crosswater TH2-RGH Manuel utilisateur

Applicable Standards/Codes

TH2-RGH

15122953

For ease of installation you will need:

●To read the installation instructions completely before beginning.

●To read all warnings, care, and maintenance information.

15122953 4

Installation Dimensions

IAPMO certified to meet or exceed the following:

• ASME A112.18.1/CSA B125.1

• Uniform Plumbing Code

• National Plumbing Code of Canada

• ASSE 1016

3 1/8＂

5 7/8＂4 13/16＂

4 3/16＂

3 9/16＂

2＂

5 1/4＂

6 5/16＂-6 1/2＂

2 3/4＂

3/4＂-14NPT 3/4＂-14NPT

4 1/4＂

5 1/8＂

2 1/8＂-2 5/8＂

2 3/4＂-3 5/16＂

Dual-control Thermostatic Valve Rough

TH2-RGH

Installation Instructions

Before beginning installation, check for any

damage that may have occurred during transport.

Note: Damage claims cannot be made during

or after installation.

TH2-RGH

Installation Instructions

151229533

15122953 2

Replacement Parts

This valve is designed to fit into a

wall that is 2-3/4” to 3 -1/4" from

finished wall to the back of the valve.

If necessary,extensions can be

purchased separately.

Turn off the water supplies. Install the

valve so the finished wall will fit

between the markers on the mud

guard.

Using mounting holes secure the

valve making sure the "UP" label

outlet is on top. Facing the valve,

the hot supply must be on the left

and the cold on the right.

Warning：If soldering is required

for any connection,remove the

cartridge and check valve

assemblies before soldering.

Connect top outlet with proper

fittings.Note: it is suggested that you

anchor all water lines.

Installation completed.

2-3/4＂ - 3-1/4" 2-3/4＂ - 3-1/4"

Best if finished wall

is flush to this surface.

Connect valve body 3/4-NPT inlets

to water supplies using the proper

fittings. Warning: This valve does

not offer a back-to-back installation

option.

Warning

1.Pressure test and flush the valve.

a. Prior to testing, remove cartridge and check valve assemblies.

b. Plug the outlet and check for leaks.

c. After testing, flush system.

d. Remove shower outlet plug. Re-install the cartridge and check valve assemblies.

2.Check for leaks.

Mounting hole

a b c d

Ordered Separately if needed

NO. Description Part NO.

Extension kit 9K3172

Cartridge 5K217404PL

Nut 5K217405NT

Check valve 5K013107PL

Temperature control rings

Complete Mud Guard

5K202716PL

5K202720PL

Cartridge 5K202711NT

This thermostatic valve has been preset at the factory

to deliver water at a maximum of 120ºF. If you would

like to change this setting please refer to the

temperature change instructions noted in the trim

installation instructions for this valve.

TH2-RGH

Installation Instructions

151229533

15122953 2

Replacement Parts

This valve is designed to fit into a

wall that is 2 3/4” to 3 5/16” from

finished wall to the back of the valve.

If necessary extensions can be

purchased separatley.

Turn off the water supplies. Install the

valve so the finished wall will fit

between the markers on the mud

guard.

Using mounting holes secure the

valve making sure the "UP" label

outlet is on top. Facing the valve,

the hot supply must be on the left

and the cold on the right.

Warning：If soldering is required for

any connection remove the cartridge

and check valve assemblies before

soldering.

Connect top outlet with proper

fittings.Note: it is suggested that you

anchor all water lines.

Installation completed.

2 3/4＂-3 5/16＂

Best if finished wall

is flush to this surface.

Connect valve body 3/4-NPT inlets

to water supplies using the proper

fittings. Warning: This valve does

not offer a back-to-back installation

option.

Warning

1.Pressure test and flush the valve.

a. Prior to testing, remove cartridge and check valve assemblies.

b. Plug the outlet and check for leaks.

c. After testing, flush system.

d. Remove shower outlet plug. Re-install the cartridge and check valve assemblies.

2.Check for leaks.

Mounting hole

a b c d

Order separately if needed

NO. Description Part NO.

Extension kit 9K3172

Cartridge 5K217404PL

Nut 5K217405NT

Check valve 5K013107PL

Temperature control rings

Complete Mud Guard

5K202716PL

5K202720PL

Cartridge 5K202711NT

This thermostatic valve has been preset at the factory

to deliver water at a maximum of 120ºF. If you would

like to change this setting please refer to the

temperature change instructions noted in the trim

installation instructions for this valve.

Applicable Standards/Codes

VALVE ONLY

Two Outlet, Volume Control, Dual Handle Therm Valve

TH2-RGHTH2-RGH

15122953

Installation Instructions

For easy installation of your faucet you will need:

●To read all the installation completely before beginning.

●To read all warnings, care, and maintenance information.

15122953 4

Installation Dimensions

IAPMO certified to meet or exceed the following:

• ASME A112.18.1/CSA B125.1

• Uniform Plumbing Code

• National Plumbing Code of Canada

• ASSE 1016

3-1/8＂

5-7/8＂4-3/4"

4-1/4"

2＂

5-1/4＂

6-1/4" - 6-1/2＂

2-3/4＂

3/4＂-14NPT 3/4＂-14NPT

3-1/2"

4-1/4＂

5-1/8＂

2-1/8＂ - 2-5/8＂

2-3/4＂ - 3-1/4"

Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.

For further information contact:Crosswater London, 393 Fortune Blvd., Milford, MA 01757

Toll free number: 844-XWATER-1 (844-992-8371) tel: 508-381-0433 fax: 508-381-6068

www.crosswaterlondon.com

email: technical@crosswaterlondon.com

Issue date: 15092019

Autres manuels Crosswater Unité de contrôle

Crosswater

Crosswater KL0007WC Manuel utilisateur

Crosswater

Crosswater EV1253EC Manuel utilisateur

Crosswater

Crosswater WLBP3001R Plus Manuel utilisateur

Crosswater

Crosswater US-DL2001RC Manuel utilisateur

Crosswater

Crosswater PBS-RGH Manuel utilisateur

Crosswater

Crosswater SE350DC Manuel utilisateur

Crosswater

Crosswater US-WF1000EV Manuel utilisateur

Crosswater

Crosswater US-BL1000EV Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur