Crosley CR6016A Manuel utilisateur

CR6016A

Spinnerette Turntable

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. – 6 p.m., EST, Monday – Friday

1-888-CROSLEY

www.crosleyradio.com

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these

instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the

power outlet only one way. If you are unable to insert the plug fully into the

outlet try reversing the plug. If the plug should still fail to fit, contact your

electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

9. Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating. Do not

block or cover these openings.

12. Unplug the product during lightning storm or when unused for long periods of

time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

•Turntable

•45 RPM adapter

•3.5mm aux in cable

•Power adaptor

•USB cable

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power AC power adaptor, DC output 12V 1A

Power consumption 12W

Speaker 3.5”, 8Ω, 5W x1

Turntable speed 331/3, 45, 78 RPM

Replacement needle Crosley NP5

Note:

•Design and specifications are subject to change without notice.

•To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will

automatically cut-off. To turn power back on and resume playing, you will need to

turn off the power and turn it on again.

English

Product Description

1. Turntable Lock

2. Speaker

3. Volume Control

4. Tone Control

5. Turntable Platter

6. Turntable Spindle

7. Tonearm

8. Hold Down Clip

9. Tonearm Rest

10. Auto-stop Switch

11. Speed Switch

English

12. Function Switch 13. USB Jack

14. Aux in Jack

15. Headphone Jack

16. Auto-stop Adjustment Hole

17. Power Jack

18. Power Adapter Compartment

19. 45 RPM Adapter

English

Initial Setup

Essential Setup

1. Slide the Turntable Lock to the right to release the turntable deck and place

the turntable on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the tie-wrap that is holding the tonearm.

3. Connect AC adaptor to the Power Jack of the unit.

Note: Do not plug the AC power adaptor to power outlet before all the assembly is

completed. Before turning the power on, make sure again all the connection settings

are correct. Always turn off the power when connecting or disconnecting.

Aux Input Connection

You can connect an audio device to this unit and play your music through its

speakers. To do this, set the Function Switch to the Aux mode, and connect the

3.5mm auxiliary cable between your audio device and the Aux In Jack of this

unit and start playing.

Turntable Operation

1. Set the Function Switch to PHONO position.

2. Set the Speed Switch accordingly.

3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

4. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is in place

whenever the turntable is being moved or cleaned.

5. Release the tonearm Hold Down Clip.

Note: when the turntable is not in use, remember to lock back hold down clip.

6. Lift up the Tonearm and move it over the record where play is desired to

begin. Gently put down the Tonearm and begin the playback.

7. When the record is finished playing, gently lift up the Tonearm and move it

back to the Tonearm Rest.

8. Lock the Hold Down Clip to secure the tonearm.

Tone Control

Slide the Tone Control can adjust the treble level of the turntable.

English

Platter Auto-stop

If the Auto-stop Switch is set to ON position, the platter will stop spinning

automatically when the record plays to the end. In some rare occasion, if the

turntable stops playing before the end of the record, set the switch to OFF

position the turntable should overcome this issue.

Adjustment if Tonearm Stops too early

If the platter stops before the tonearm reaches the end of the record, you can

adjust it by following the below steps:

1. Disconnect the turntable from the power supply.

2. Insert a screwdriver into the Auto-stop Adjustment Hole and locate the

tuning screw inside.

3. If the tonearm stops earlier than the end of the record, rotate the screw

clockwise by approximately ¼ turn only.

4. Reconnect the turntable to the power supply.

5. Replay the record to see if the adjustment has been successful. If not, repeat

steps 1-4, but only rotate slightly to perform the fine adjustment. Rotate the

screw counter-clockwise if the tone arm fails to stop. Repeat this fine

adjustment process until the tonearm will stop at the correct finish point.

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angle and gently lift the

front of the needle upward until it snaps into place.

English

USB Recording

To record the vinyl into digital file formats such as MP3, you can use the USB

Output Jack to connect this unit to your computer’s USB port and use the

recording program of your choice.

1. Use the supplied USB cable to connect the unit to your computer.

2. Turn on the power of the turntable.

3. Run the recording program of your choice.

Note:

•In case you do not have a recording program installed, Audacity is a free software to

use, distributed under the GNU General Public License (GPL). For most updated

version of Audacity and instructions on how to use it, please visit Audacity website:

http://www.audacityteam.org/. Crosley would not carry responsibility or support for third

party software and all downloads should be carried out at user’s own responsibility.

•Depending on the operating system and software that you are using, you may need to

make some changes on settings of the operating system and/or software before

starting the recording process. As a general guideline, the recording source/input

should be set to Microphone USB audio codec. And it is recommended to set it to 2

channel, 16 bit, 48000Hz (DVD Quality)

•Make sure the USB connection is made to the USB jack of your computer directly

instead of a USB hub to ensure a successful connection.

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the

turntable mat or a record’s edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush

and record cleaning solution.

4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber

cloth.

Note: Do not use cleanser other that contains alcohol, benzene or any other harsh

chemicals, which might damage the paint and finish of the turntable.

** Crosley offers a product line of different cleaning accessories. Please

ask your retailer or check out our website www.crosleyradio.com for

more cleaning product information.

English

Troubleshooting

There is no power

•Power adaptor is not connected correctly.

•No power at the power outlet.

•To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers

will automatically cut-off. To turn power back on and resume playing, turn off

the power and turn it on again.

Power is on, but the platter does not turn

•Turntable mode is not selected.

•Turntable’s drive belt has slipped off.

FCC Statements

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio TV technician for help.

Autres manuels pour CR6016A

Table des matières

Autres manuels Crosley Platine

Crosley

Crosley CR6251A Manuel utilisateur

Crosley

Crosley Crosley Turntable Console CR44 Manuel utilisateur

Crosley

Crosley CR7020A Manuel utilisateur

Crosley

Crosley CR6231D Manuel utilisateur

Crosley

Crosley CR711 Manuel utilisateur

Crosley

Crosley STACK-O-MATIC CR89 Manuel utilisateur

Crosley

Crosley CR6009A Advance Manuel utilisateur

Crosley

Crosley Cruiser Plus Manuel utilisateur

Crosley

Crosley Momento CR8018A Manuel utilisateur

Crosley

Crosley CR6026A-BK Manuel utilisateur

Crosley

Crosley Cruiser Premier CR8005G Manuel utilisateur

Crosley

Crosley CR6236A Manuel utilisateur

Crosley

Crosley T100A Manuel utilisateur

Crosley

Crosley Gig Manuel utilisateur

Crosley

Crosley Crosley Conductor CR73 Manuel utilisateur

Crosley

Crosley C62C Manuel utilisateur

Crosley

Crosley CR6042A Manuel utilisateur

Crosley

Crosley Crosley Mission Stack-O-Matic CR72 Manuel utilisateur

Crosley

Crosley CR6234A Manuel utilisateur

Crosley

Crosley KEEPSAKE CR249 Manuel utilisateur

Crosley

Crosley CR6236A Manuel utilisateur

Crosley

Crosley CR42E-PA Manuel utilisateur

Crosley

Crosley Crosley CD Console CR44CD Manuel utilisateur

Crosley

Crosley CR704 Manuel utilisateur

Manuels Platine populaires d'autres marques

Gemini

Gemini CDT-05 MKII Manuel utilisateur

Rotel

Rotel RP-820 Manuel utilisateur

Shuman

Shuman MC-250BT Manuel utilisateur

Stanton

Stanton STR8-150 Manuel utilisateur

Audio Technica

Audio Technica AT-LPW40WN Manuel utilisateur

Reloop

Reloop SMP-1 Manuel utilisateur

auna

auna TT-Classic Plus Manuel utilisateur

COMO AUDIO

COMO AUDIO Turntable Analog Manuel utilisateur

Dual

Dual 1009 F Manuel utilisateur

REED

REED Muse3C Manuel utilisateur

AXIOMTEK

AXIOMTEK OPS883-H Series Manuel utilisateur

Pioneer

Pioneer PL-71 Manuel utilisateur

Vestax

Vestax PDX-a1 Manuel utilisateur

Denon

Denon DP-400 Manuel utilisateur

Dual

Dual 504 Manuel utilisateur

Audio-Techica

Audio-Techica AT-LP60XBT Manuel utilisateur

Goldring

Goldring G99 Manuel utilisateur

Acoustic Signature

Acoustic Signature Typhoon NEO Manuel utilisateur