Crestron DGE-100 Manuel du propriétaire

DGE-100/DM-DGE-200-C

Digital Graphics Engines

Supplemental Guide

Crestron Electronics, Inc.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive,

non-transferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron

dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron

website at www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or

other countries. HDMI, the HDMI logo, and High Definition Multimedia Interface are either trademarks or registered trademarks of HDMI

Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this

document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the

marks and names of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Supplemental Guide – DOC. 7696B Contents

•

Contents

Access the Setup Screens 1

Configure the DGE 2

Ethernet Setup ........................................................................................................ 2

IP Table Setup ........................................................................................................ 3

Audio Setup ............................................................................................................ 5

Standby Timeout..................................................................................................... 6

Diagnostics ............................................................................................................. 7

Touch Test................................................................................................. 8

LAN Test.................................................................................................... 8

Test Patterns.............................................................................................. 9

HDMI Preview (DGE-100 Only)................................................................... 9

Local Video Preview (DM-DGE-200-C Only)............................................. 10

RTSP Test................................................................................................ 10

About .................................................................................................................... 11

Save & Edit ........................................................................................................... 11

Supplemental Guide – DOC. 7696B DGE-100/DM-DGE-200-C: Digital Graphics Engines

•

DGE-100/DM-DGE-200-C:

Digital Graphics Engines

Access the Setup Screens

The setup screens enable basic configuration prior to regular operation of the Crestron®

DGE-100 and DM-DGE-200-C.

The DGE-100 and DM-DGE-200-C are functionally similar. For simplicity within this guide,

the term “DGE” is used except where noted.

During regular operation of the DGE, there are two ways to access the setup screens:

1. Place a button on the project main page and assign the reserved join number

(17242) that accesses the setup screens.

2. Press the

SETUP

button on the DGE.

The main setup screen is displayed.

Setup Screen

The setup screen is composed of buttons for Ethernet setup, IP table setup, audio setup,

standby timeout, and diagnostics. In addition, there is a button to toggle system messages

on or off, an

About

button that provides information about the touch screen, and a

Save &

Exit

button. The functions of each are detailed in the following pages of this guide.

•

DGE-100/DM-DGE-200-C: Digital Graphics Engines Supplemental Guide – DOC. 7696B

Configure the DGE

Ethernet Setup

On the main setup screen, tap

Ethernet Setup

to display the

Ethernet Setup

screen.

Ethernet Setup Screen

The

Ethernet Setup

screen displays the DGE’s MAC and IP addresses, subnet mask,

default router, primary and secondary DNS, hostname, and domain. There are controls for

turning DHCP on and off, and when DHCP is off, a

Set Static IP Address Settings

button

provides access to controls that allow editing of these settings. This screen also contains a

link indicator to show the status of the Ethernet connection.

DHCP is enabled by default. To change to a static IP address, tap

Off

under

DHCP

Enabled

, and then tap

Set Static IP Address Settings

to display the

Ethernet Setup -

Static IPs

screen.

Ethernet Setup - Static IPs Screen

To edit the static IP address, static subnet mask, static default router, preferred DNS, or

alternate preferred DNS, tap the button directly under the label for the entry to edit. The on-

screen numeric keypad opens.

Supplemental Guide – DOC. 7696B DGE-100/DM-DGE-200-C: Digital Graphics Engines

•

On-Screen Numeric Keypad

Tap the “x” in the text field to clear any previous entry. Use the keypad to make the new

entry. Tap to delete the last digit. Tap

Save

to save the new entry or to

return to the

Ethernet Setup - Static IPs

screen.

After new settings have been saved, tap

Reboot

on the

Ethernet Setup - Static IPs

screen

to reboot the DGE so that the new settings can take effect.

If not making any changes, tap to return to the

Ethernet Setup

screen.

Tap again to return to the main setup screen.

IP Table Setup

On the main setup screen, tap

IP Table Setup

to display the

Ethernet Setup - IP Table

screen.

Ethernet Setup - IP Table Screen

The

Ethernet Setup - IP Table

screen displays up to four IP table settings, each of which

has an

Online

indicator. To add or edit an entry, tap the

Add/Edit

button to its left. The

Ethernet Setup - Edit IP Table Entry

screen is displayed.

•

DGE-100/DM-DGE-200-C: Digital Graphics Engines Supplemental Guide – DOC. 7696B

Ethernet Setup - Edit IP Table Entry Screen

Tap the field below

CIP ID

to display the on-screen hex keypad.

On-Screen Hex Keypad

Tap the “x” in the text field to clear any previous entry. Use the keypad to make the new

entry. Tap to delete the last digit. Tap

Save

to save the new entry or to

return to the

Ethernet Setup - Edit IP Table Entry

screen.

Tap the field below

IP Address/Hostname

to display the on-screen keyboard.

Supplemental Guide – DOC. 7696B DGE-100/DM-DGE-200-C: Digital Graphics Engines

•

On-Screen Keyboard

Tap the “x” in the text field to clear any previous entry. Use the keyboard to make the new

entry. Tap

Cancel

to return to the

Ethernet Setup - Edit IP Table Entry

screen. Tap

to delete the last digit. Tap

Save

to save the new entry and return to the

Ethernet Setup -

Edit IP Table Entry

screen.

On the

Ethernet Setup - Edit IP Table Entry

screen, tap

Save Entry

to save the current

entry or

Delete Entry

to clear it.

If not making any changes, tap to return to the

Ethernet Setup - IP Table

screen.

Tap again to return to the main setup screen.

Audio Setup

On the main setup screen, tap

Audio Setup

to display the

Audio Setup

screen.

Audio Setup Screen

The

Audio Setup

screen provides controls for muting or unmuting the audio, and for

adjusting levels for the master volume, media volume, and beep volume. The

Media

Volume

controls adjust the H.264 streaming media level in relation to the

Master Volume

controls.

•

DGE-100/DM-DGE-200-C: Digital Graphics Engines Supplemental Guide – DOC. 7696B

Tap to return to the main setup screen.

Standby Timeout

On the main setup screen, tap

Standby Timeout

to display the

Standby Timeout

screen.

Standby Timeout Screen

The

Standby Timeout

screen provides controls to adjust standby timeout from 0 to 120

minutes.

Tap

Screen Saver Options

to display the

Standby - Screen Saver

screen.

Standby - Screen Saver Screen

The

Standby - Screen Saver

screen provides controls to turn the digital clock screen saver

on and off, as well as controls to display the time in a 24-hour format and to adjust the

screen saver brightness.

Tap to return to the

Standby Timeout

screen.

Tap again to return to the main setup screen.

Autres manuels pour DGE-100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Crestron Contrôleurs

Crestron

Crestron C2N-SDC-DC Comment utiliser

Crestron

Crestron SP-RY Manuel utilisateur

Crestron

Crestron DigitalMedia Room Controller DM-RMC-100 Comment utiliser

Crestron

Crestron 3 Series Dessin dimensionnel

Crestron

Crestron DM-RMC-4K-SCALER-C Manuel utilisateur

Crestron

Crestron 4 Channel Motor Control Module CLX-1MC4 Manuel utilisateur

Crestron

Crestron HD-CTL-101 Manuel utilisateur

Crestron

Crestron PC-350V-12 Manuel utilisateur

Crestron

Crestron CLCI-MCEX Manuel utilisateur

Crestron

Crestron QM-RMC Manuel utilisateur

Crestron

Crestron MC2W Manuel utilisateur

Crestron

Crestron IPAC Manuel utilisateur

Crestron

Crestron ZUMMESH-JBOX Series Manuel utilisateur

Crestron

Crestron onCue BPC-8 Manuel utilisateur

Crestron

Crestron CP4-R Manuel utilisateur

Crestron

Crestron ZUMMESH-JBOX-DALI Manuel utilisateur

Crestron

Crestron onCue BPC-8 Dessin dimensionnel

Crestron

Crestron C3COM-3 Manuel utilisateur

Crestron

Crestron 4K DigitalMedia 3-Series Manuel utilisateur

Crestron

Crestron ZUMMESH-JBOX-20A-SW Manuel utilisateur

Crestron

Crestron onCue BPC-8 Manuel du propriétaire

Crestron

Crestron C2N-SSC-2 Comment utiliser

Crestron

Crestron DM-RMC-4K-100-C-1G Manuel utilisateur

Crestron

Crestron SP-SC Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur