Crestron DGE-100 Manuel utilisateur

The Crestron® DGE-100 and DM-DGE-200-C are high-performance

digital graphics engines for the Crestron TSD-2220 and third-party touch

screen displays. The DGE-100 and DM-DGE-200-C feature Smart

Graphics® technology that may be used to create a custom graphical

environment for controlling audio, video, lighting, shades, HVAC, security,

and other amenities, or used for other functions with dual-window video

display, annotation, audio feedback, and web browsing.

In the Box

1 DGE-100 or DM-DGE-200-C, Digital Graphics Engine

Additional Items

1 Connector, 4-Pin (2003576)

1 Connector, 5-Pin (2003577)

DGE-100 Only

1 Power Pack, 24 VDC, 0.75 A, 100-240 VAC (2045865)

DM-DGE-200-C Only

1 Cable, Power, 5 ft 10 in. (1.78 m) (2042043)

1 Power Pack, 24 VDC, 2.5 A, 100-240 VAC (2045873)

Install the Device

The device can be mounted onto a rack rail or a flat surface.

Mount on a Rack Rail

Mount the left or right mounting flange of the device onto the front or

rear of a rack rail with two mounting screws (not included).

DGE-100/DM-DGE-200-C QuickStart

Digital Graphics Engines

Mount on a Flat Surface

Mount the device onto a flat surface with four mounting screws (not

included). Connect the Device

Connect the device as called out in the following illustrations. Use

Crestron power supplies for Crestron equipment.

NOTES:

lThe DGE-100 does not require a connection to the included power

pack if PoE (Power over Ethernet) is used to power the device. Use

one or the other, but not both at the same time.

lThe DM-DGE-200-C does not support PoE or PoDM (Power over

DM® input) and must be powered by the included power pack.

DGE-100/DM-DGE-200-C QuickStart

Digital Graphics Engines

DGE-100 Top Panel Connections

DGE-100 Bottom Panel Connections

DM-DGE-200-C Top Panel Connections

DM-DGE-200-C Bottom Panel Connections

DGE-100/DM-DGE-200-C QuickStart

Digital Graphics Engines

Configure the Device

When power is applied for the first time, a splash screen is shown on a

connected touch screen display. Tap this screen to access the setup

screens for device configuration.

NOTE: The device may take up to two minutes (120 seconds) to boot.

Device settings for the DGE-100 and DM-DGE-200-C may be configured

using the built-in setup screens or using the included web configuration

interface. For more information on configuring the device, refer to the

DGE-100/DM-DGE-200-C Supplemental Guide (Doc. 7696) at

www.crestron.com/manuals.

NOTE: The DGE-100 or DM-DGE-200-C must be connected to a

touch screen display to use the built-in setup screens.

Access the Device Setup Screens

To access the built-in setup screens during regular operation, do one of

the following:

lPlace five fingers on the touch screen display of a connected TSD-2220

and hold for 15 seconds.

lPress the SETUPbutton on the device bottom panel.

Access the Web Configuration Interface

To access the web configuration interface, ensure the device is connected

to the network and use the Device Discovery tool in Crestron Toolbox™

software to discover the device and its IPaddress on the network. Then

enter the device IP address into a web browser.

The device IP address is also found on the device splash page, which may

be viewed on a connected touch screen display after applying power to the

device for the first time.

Connect to Crestron XiO Cloud

Service (Optional)

The Crestron XiO Cloud™ service allows supported Crestron devices

across an enterprise to be managed and configured from one central and

secure location in the cloud. Supported devices are preconfigured to

connect to the service. Use of the service requires a registered Crestron

XiO Cloud account.

NOTE: The device can be disconnected from the service using the

Cloud Services tab in Crestron Toolbox™ software (Functions > Device

Info > Cloud Services). For details, refer to the Crestron Toolbox help

file.

To connect the device to the Crestron XiO Cloud service:

1. Record the MAC address and serial number labeled on the shipping box

or rear panel of the device. The MAC address and serial number are

required in order to add the device to the Crestron XiO Cloud

environment.

2. Enter the device IP address into a web browser to access the web

configuration interface.

3. Navigate to DEVICE > Device Management > Cloud Settings.

4. Toggle the Cloud Configuration Service Connection switch to Enabled.

5. Do either of the following:

lFor existing accounts, access the Crestron XiO Cloud service at

https://portal.crestron.io.

lFor new accounts, register for a Crestron XiO Cloud account at

www.crestron.com/xiocloud.

For detailed information about using the Crestron XiO Cloud service,

refer to the Crestron XiO Cloud Service User Guide (Doc. 8214) at

www.crestron.com/manuals.

DGE-100/DM-DGE-200-C QuickStart

Digital Graphics Engines

Visit the Product Page

Scan the QR code to visit the product page.

DGE-100

www.crestron.com/model/6507101

DM-DGE-200-C

www.crestron.com/model/6507102

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Crestron, and the Crestron logo, Crestron Toolbox, Crestron XiO Cloud, DigitalMedia,

DM, and Smart Graphics are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. HDMI, the HDMI logo, and

High Definition Multimedia Interface are either trademarks or registered trademarks

of HDMI Licensing LLC in the United States and/or other countries. Other trademarks,

registered trademarks, and trade names may be used in this document to refer to

either the entities claiming the marks and names or their products. Crestron disclaims

any proprietary interest in the marks and names of others. Crestron is not responsible

for errors in typography or photography.

Doc. 7695G

04/23/20

DGE-100/DM-DGE-200-C QuickStart

Digital Graphics Engines

Autres manuels pour DGE-100

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Crestron Matériel informatique

Crestron

Crestron C2COM-2 Comment utiliser

Crestron

Crestron TPS-GA-TPI Manuel utilisateur

Crestron

Crestron DGE-100 Dessin dimensionnel

Crestron

Crestron 4 Series Manuel utilisateur

Crestron

Crestron CNX-PAD8A Manuel utilisateur

Crestron

Crestron 3 Series Manuel utilisateur

Crestron

Crestron DIN-AP3MEX Instructions d'utilisation d'origine

Crestron

Crestron CNXIO-16 Manuel utilisateur

Crestron

Crestron ST-CP Manuel utilisateur

Crestron

Crestron CNXCPU Comment utiliser

Crestron

Crestron Four-Way Coupler SRD-CPL-4 Manuel utilisateur

Crestron

Crestron C2N-IO Manuel utilisateur

Crestron

Crestron CNXRY-8 Manuel utilisateur

Crestron

Crestron UPX-OS4GB-MSO-2007 Manuel utilisateur

Crestron

Crestron IRP2 Manuel utilisateur

Crestron

Crestron C2ENET-1 Comment utiliser

Crestron

Crestron UPX-2 Manuel utilisateur

Crestron

Crestron DIN Rail Control Processor DIN-AP2 Comment utiliser

Crestron

Crestron CNXIR-8 Manuel utilisateur

Crestron

Crestron CNX-BIPAD8 Manuel utilisateur

Crestron

Crestron C2IR-8 Comment utiliser

Crestron

Crestron C2VEQ-4 Comment utiliser

Crestron

Crestron CNXENET+ Comment utiliser

Crestron

Crestron DigitalMedia DMC-CPU3 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur