CRE Technology I4GEN Mode d’emploi

i4GEN - TECHNICAL DOCUMENTATION

2 / 64

Table of cont en ts

Introduction .................................................................................................................. 3

Caution Safety Protections ............................................................................................................ 3

User's Notice ............................................................................................................................... 4

Package Contents ........................................................................................................................ 4

Environmental Protection Announcement ....................................................................................... 4

General Description ..................................................................................................................... 5

Specifications .............................................................................................................................. 6

Presentation ............................................................................................................................... 8

Installation .................................................................................................................... 9

Mechanical Mounting ................................................................................................................... 9

USB Device Fixed Parts (Optional) ............................................................................................... 10

WIFI Antenna Installation (Optional) ............................................................................................ 11

Power Supply ............................................................................................................................ 11

Network Connection ................................................................................................................... 12

Communication ............................................................................................................ 13

Pre-requisite ............................................................................................................................. 13

Login/Connection ....................................................................................................................... 14

Functioning .................................................................................................................... 18

Interface ................................................................................................................................... 18

Supervision ............................................................................................................................... 23

Graphics Objects .................................................................................................................. 24

Alarm/Fault Page .................................................................................................................. 31

About Page .......................................................................................................................... 34

Home Page .......................................................................................................................... 35

Static Configuration ................................................................................................................... 36

Interface .............................................................................................................................. 37

Editing Windows ................................................................................................................... 39

Modification by Variable Number ............................................................................................ 45

i4Gen Settings ........................................................................................................................... 47

Language ............................................................................................................................. 48

Theme ................................................................................................................................ 49

Screen ................................................................................................................................ 50

Date/Time ........................................................................................................................... 51

Connection ........................................................................................................................... 52

Network ............................................................................................................................... 55

File Transfer ........................................................................................................................ 56

Support ............................................................................................................................... 60

Preferences ......................................................................................................................... 61

System ................................................................................................................................ 62

Dimensions .................................................................................................................... 64

i4GEN - TECHNICAL DOCUMENTATION

3 / 64

In tr od u ct ion

Caution Safety Protections

Operate the product according to the correct installation steps and with great care to make sure safety and

comfort using experience. Please refer to the following safety instruction guide to avoid the danger of electric

shock or fire. Abide by the previous safety instruction guide to use and maintain the product and the hard

disk to make sure of a safe operating environment.

·Please follow the instruction manual for the operation guide.

·The appropriate operating temperature range is -10...60°C.

·The operation humidity for this product is 5...80%RH.

·To avoid high temperature, please DO NOT overload the maximum power of the external power

supply while the system is consuming high voltage. Be aware of the maximum temperature

allowance of the power supply.

·See to it that the product is not working near the water.

·Always unplug the power cable and other hardware cables from the system before cleaning.

·Apply only dry cloth for cleaning the product.

·Make sure that there is no heat source nearby when the product is working.

·Make sure that the thermal louver of the product is not blocked.

·Make sure to remove the power plug from the product when there is a thunderstorm.

·Please remove the power plug from the product when you are not going to use the product for a long

time.

·Make sure to set up or use the product on a stable surface.

·Make sure not to drop the product or strike it by any means.

·Make sure not to move the product when the power is on.

·Make sure not to step on the power cables and other cables or rest anything in them. Be sure to

ground yourself to prevent static charge when installing any internal components. Use a grounding

wrist strap and place all electronic components in any static-shielded devices. Most electronic

components are sensitive to static electrical charge.

·Disconnect the power cord from the Panel PC unit prior to any installation. Be sure both the system

and all external devices are turned off. A sudden surge of power could ruin sensitive components.

Make sure the Panel PC unit is properly grounded. unit

·Do not open the system's back cover. If opening the cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on computer boards are sensitive to static

electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions:

·Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis

for a few seconds. This will help to discharge any static electricity on the human body.

·When handling boards and components, wear a grounding wrist strap available from most electronic

component stores.

·Please contact a qualified technician for maintenance or repair.

·Use only accessories and parts that are made by the qualified manufacturer.

i4GEN - TECHNICAL DOCUMENTATION

4 / 64

User's Notice

software described in it may be reproduced, transmitted or translated into any language in any form or by

any means without written permission of the manufacturer.

This manual contains all the information required for the utilization of this product to meet the userʼs

requirements. It may change or be corrected at any time without notice.

Manufacturer provides this manual “as is” without warranty of any kind, and will not be liable for any indirect,

special, incidental or consequential damages (including damages for loss of profit, loss of business, loss of

use of data, interruption of business and the like).

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies. They are used only for identification or explanation and to the

ownerʼs benefit, without intent to infringe.

Package Contents

-1x i4Gen

-1x AC-DCAdapter

-1x Power cord

-2x WIFI antenna

-1x Cabinet fixed parts

-1x USB fixed parts

-1x Quick-start

Environmental Protection Announcement

Do not dispose of this electronic device into the trash while discarding. To minimize pollution and ensure

environmental protection of mother earth, please recycle.

i4GEN - TECHNICAL DOCUMENTATION

5 / 64

General Description

·10-point capacitive multi-touch

·Edge-to-edge narrow bezel design and fan-less cooling system

·Designed for easy wall mount, panel mount, and VESA mount installation

·A true flat, easy-to-clean front surface with an edge-to-edge design

·USB 3.0 ports support lock device

·IO ports designed for easy connection

·9...36V DC-input support, with EOS, OVP design

·On-board Intel® Braswell series SoC processor, with low power consumption never denies the high

performance

·On-board 4GB DDR3L 1333Mhz SO-DIMM

·On-board 1 x full-size Mini-PCIE slot

·On-board 1 x M.2 slot (M-key), type-2242 SATA interface for SSD device

·Support 2 x RJ-45 Gigabit LAN port and 1*external RJ-45 COM port

·1x2.4G WIFI module with support for 802.11 b/g/n WIFI communication

Additional Functions

·WiFi: The Mini PCI-E on-board socket in the board is integrated with a WIFI card (802.11 b/g/n) that can

act as a mini wireless modem when external antennas are connected. Different computers in the house

can build wireless connections through the Mini TOPS (Total Operations Processing System) and take

necessary data from it, thus reducing the complexity in network establishment.

·Giga LAN: The system is integrated with Gigabit LAN network controller with ACPI (Advanced

Configuration and Power Interface) management realizing efficient power management for the operating

system.

·USB 3.0: Experience fastest data transfers at 5Gb/s with USB 3.0 the new latest connectivity standard.

Built connect easily with next-generation components and peripherals, USB 3.0 transfers data 10 times

faster and backward compatible with previous USB2.0 components.

·CPU usage: The CPU Usage diagram shows a beautiful data curve that indicates a pretty low CPU

usage percentage for video playback of different formats. GPU performances are excellent as well.

·dB value: The design of the system takes into consideration the needed quiet operating environment in

the living room and the average dB value is below 26 under normal operation to ensure the tranquility

when you are absorbed in film watching.

i4GEN - TECHNICAL DOCUMENTATION

6 / 64

Specifications

Display

Front bazel IP65, NEMA 4 rugged protection, Full planar metal border

Display type 10.1'' with LED back-light

Brightness (cd/m²) 400 nits

Display color 16.2M

Resolution 1280x800 at 60Hz

Viewing angle (H/V) 170°/170°

Pixel pitch 0,1695x0,1695mm

Aspect ratio 16:10

Contrast ratio 800:1

Response time 30ms

Touch Screen

Type Projected capacitive type

Active range 257,1x159,66mm +0,2mm (10,1x6,29in)

Transparency > 87%

Surface hardness > 6H (JIS-5400)

Glass haze value > 3%

Main CPU Board

CPU Intel® Braswell series SoC CPU

System memory On-board 4GB DDR3L 1333MHz SO-DIMM

BIOS AMI 64Mb Flash ROM

i4GEN - TECHNICAL DOCUMENTATION

7 / 64

I/O System

Icon Name Qua

ntity Description

Power

button 1 Press to turn On/ Off the system.

DC-in power

connector 1 For the user to connect compatible terminal power block to provide a

power supply for the system.

HDMI port 1 To connect display device that supports HDMI specification (not

used).

USB 3.0

port 4 To connect aUSB keyboard, mouse or other devices compatible with

the USB specification. USB 3.0 port supports upto 5Gbps data

transfer rate.

RJ-45 LAN

port 2 This connector is standardRJ- 45 LANjack for network connection.

RJ-45 COM

port 1 This connector is standardRJ- 45 COM jack for serial console port

connection (not used).

GPIO

connector-

male

1 This connector is an RJ-45 COM port for console function (not

used).

Environment

Operating temperature range -10...60°C

Humidity 5...80% RH (relative humidity)

i4GEN - TECHNICAL DOCUMENTATION

8 / 64

Presentation

i4Gen is a user interface made by CRE TECHNOLOGY to offer users complete management of new CRE

TECHNOLOGY controllers.

The unit hardware is a multi-touch screen color display develop for harsh environment and industrial areas,

providing access to all data of the controllers for control, measurement, and configuration.

Thanks to an embedded TeamViewer© License, it will be possible to access remotely to the i4Gen for

support, remote control or fleet management.

i4Gen License free software provides also the capability for each user to use the interface from any platform

(PC, tablets) in order to configure, customize and program CRE controllers on-line or off-line.

Control and Management

Direct display

i4Gen is able to display information from 1 controller in direct Ethernet connection and shows a basic

overview of the power plant by using controller CANbus data when applicable.

SCADA display

i4Gen can be used as a power plant display if connected on an Ethernet HUB accessing to each controller

with the Modbus TCP network. In SCADA mode the direct display of any of the controller is available and a

SCADA page allows the user to change the displayed controller.

Multi-user display

Several i4Gen can also be securely connected by Ethernet hub a single controller (or a group of

controllers), for redundancy application, multi-level access or long-distance monitoring panel.

Events displayed/recorded

An innovative feature turns major alarms and faults into 3D graphical object display, to warn operator about

an important event and facilitate immediate diagnosis (ex: coolant tank lights up in red in case of coolant

temp fault or in orange in case of coolant temp alarm).

An event alarm/fault recorder is also available on a dedicated display page, indicating timestamps, status,

acknowledgment, and corresponding variable; the event page can be filtered for diagnosis and investigation

of selected variables.

Compatibility

i4Gen is compatible with these controller versions:

- GENSYS COMPACT PRIME: v2.00a1 or later

- GENSYS COMPACT MAINS: v2.00a1 or later

i4GEN - TECHNICAL DOCUMENTATION

9 / 64

Ins tallation

Mechanical Mounting

Install i4Gen position at eye level and at brightness-less location.

Frame cut-out (hxl): 160x242mm (6.3x9.5in).

ChassisFixed Parts

1. Insert the corresponding edges of the fixed part into the slots until

they matched. Make sure that the fixed part is installed as shown in

the picture, with protruding tips upwards.

2. The models that support this fixing mode have pairs of slots

reserved on both sides of the module. The user can choose the

height or position of the installation spot.

3. Insert the corresponding edges of the fixed part into the slots until

they matched. Tightening up the screw so that the fixed part can be

fitted into the slots tightly. Install other fixed parts to the system in

the same way.

i4GEN - TECHNICAL DOCUMENTATION

10 / 64

USB Device Fixed Parts (Optional)

1. The USB device fixed accessories include part-A, part-B and 2 sets of screws of different sizes.

2. Align the screw holes of part-A to the corresponding screw holes from IO panel of the chassis, and then

lock part-A to the panel with the bigger screw, as the photo shows.

3. Insert the cable end of USB device you want to connect to USB port of the chassis, as the photo shows.

4. Insert part-B into corresponding slot of the part-A and choose the installing length by adjusting the screw

holes from both parts. Make sure the screw holes from both parts matched and the USB cable fitted into the

reserved slot of part-B, as the photo shows.

5. Turn over the system on a flat operation platform and lock part-B to part-A by tightening the 2 screws in

the marked spots.

6. Fastened the USB device cable by tightening up the other screw in the marked spots.

Autres manuels pour i4GEN

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CRE Technology Unité de contrôle

CRE Technology

CRE Technology UNIGEN Plus Mode d’emploi

CRE Technology

CRE Technology GENSYS 2.0 Mode d’emploi

CRE Technology

CRE Technology UNIGEN 2.0 synchro Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

CRE Technology i4GEN Mode d’emploi

Manuels Unité de contrôle populaires d'autres marques