Cradlepoint CR4250 Manuel utilisateur
11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 1/5
CR4250 High-Performance Branch Router Quick Start Guide
Feb 7, 2020 •Knowledge
NETCLOUD MANAGEMENT
(/S/TOPIC/0TO38000000Q3MAGA…
Content
CR4250 High-Performance Branch Router Quick Start Guide
Introduction
This document provides a brief overview of the CR4250 High-Performance Branch Router, discusses what's inside the box, and provides basic setup and
installation instructions for the device.
Navigation
What's in the Box
Hardware
Accessories
Required Tools
Before You Begin
Setup
Understanding LEDs
Connecting to NetCloud
Troubleshooting
Resources
Help and Support
CR4250 Branch Router Models
Terms of Service
What's in the Box
A CR4250 or CR4250-PoE Branch Router
A C13 power line cord
Four rubber feet for desk mounting
A Safety, Regulatory and Warranty Guide
Hardware
Caption
Search (Knowledge Base, Forums, Cases)
Search
Log in
Home (/s/) TECHNICAL SUPPORT (/s/contactsupport) FORUMS (/s/forums) TRAINING (/s/cpu) NETCLOUD (/s/NetCloud)
11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 2/5
Accessories
To optimize the CR4250 High-Performance Branch Router's functionality and capabilities, consider the following optional accessories:
Cradlepoint AP22 (https://cradlepoint.com/products/ap22)
Cradlepoint ARC CBA850 (https://cradlepoint.com/products/arc-cba850)
CR4250 Rack Mount (https://cradlepoint.com/products/cr4250-rack-mount)
Before You Begin
To ensure that the CR4250 High-Performance Branch router performs optimally, consider the location and environmental temperatures before installing.
Keep the device away from reflective and metallic surfaces as they may interfere with signal reception.
Avoid mounting the router in locations that experience extreme heat or cold.
The CR4250 may be set up on a flat surface or mounted in a mounting bracket. If mounting in a mounting bracket, purchase and prepare the CR4250
Rack Mount prior to setup.
Refer to the CR4250 Safety, Regulatory, and Warranty Guide (included with your hardware) for more information about location considerations.
NOTE: Cradlepoint recommends that all Branch devices be installed by a professional. For assistance with installation or in locating a professional installer,
contact Cradlepoint Sales and Support (https://cradlepoint.com/company/contact_us).
Setup
1. Connect the WAN Source
Connect the ethernet WAN source to the WAN port of the CR4250 (Port 0 is the default).
Default WAN configuration is DHCP
If a static IP address is required for connectivity, refer to the following article: NCOS: How to connect a wired WAN connection with a static
IP address to a Cradlepoint router (https://customer.cradlepoint.com/s/article/NCOS-How-to-connect-a-wired-WAN-connection-with-a-static-
IP-address-to-a-Cradlepoint-router) .
2. Connect the Power Source
Plug the provided power supply (100-240V, 50-60Hz; 1.7A max without PoE, 4.1A max with PoE) into an electrical outlet. Then connect the
power supply to the router.
11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 3/5
Ensure power is switched on (O = OFF, – = ON):
When you set the power switch to the ON ( – ) position; watch for the power LED to illuminate. Refer to the Understanding LEDs section of this
document for more information about LED lights on the CR4250 router.
3. Once the device is powered on, log into NetCloud manager and complete the device setup. Refer to the Connecting to NetCloud section in this
document for more information.
Understanding LEDs
INDICATOR BEHAVIOR
Status LED
Power: The CR4250 must be powered using an approved power source. Input requirements:
100-240V, 50-60Hz; 1.7A max without PoE, 4.1A max with PoE.
LED Off = normal operation
Blinking Green (1Hz) = upgrade in progress OR a button is currently pressed
Blinking Green (4Hz) = shutdown in progress
Blinking Orange (4Hz) = factory reset in progress
Power LED
Green = Powered ON and hardware OK
No Light = Not receiving power. Check the power source connection
Red = Critical hardware problem detected. Hardware problem means that, most likely, unit
can not boot. This can happen when hardware component (RAM, CPU, Flash, etc) was
found to have a critical issue and can’t operate as expected. Contact Support.
Power
Button
Press and hold for more than 3 seconds, but less than 7 (status LED will be flashing green
at 4Hz when button released). Unit will send shutdown signal to all of its components and
will safely power down. The PWR LED will turn RED before turning off completely.
Press and hold for more than 7 seconds. Unit will do the same thing as above, but will force
shutdown of all components.
Reset
Button
To reset the device, press and hold for more than 7 seconds (status LED will be flashing
orange at 4Hz when button is released). Customer configuration will be erased and unit will
reboot. Customer entitlements will be preserved.
Return to the Top
Connecting to NetCloud
Activate your device through NetCloud Manager (NCM). Your device is packaged with NetCloud services and requires that you log into your NetCloud
account to activate your device. Refer to the following for more information:
Getting Started with NetCloud (https://customer.cradlepoint.com/s/article/Getting-Started-with-NetCloud-Manager)
Troubleshooting
11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 4/5
Related Articles
Quick Start Guide Index (/s/article/Quick-Start-Guides) 1.54K
AER2200 Branch Router Quick Start Guide (/s/article/AER2200-Getting-Started) 19 85K
If the device takes longer than 5 minutes to connect to the Internet, you may need to log into the local UI of the device to make configuration changes or to
start the troubleshooting process. You must be physically co-located with the device in order to do this. Refer to the following document for additional help:
How to Troubleshoot Connection Issues (https://customer.cradlepoint.com/s/article/NCOS-No-Internet-or-Connection-Issues)
Once the device connects to the Internet, it should then connect to your NetCloud Manager account and start its configuration download.
Resources
CR4250 Web Page (https://cradlepoint.com/products/cradlepoint-cr4250)
CR4250 Spec Sheet (https://cradlepoint.com/sites/default/files/upload-file/cr4250-spec-sheet-072019.pdf)
Help and Support
Cradlepoint Customer Connect Community (https://customer.cradlepoint.com/s/)
Cradlepoint Support Services (https://cradlepoint.com/support-services)
CR4250 Branch Router Models
This document applies to the following CR4250 Branch router models.
CRADLEPOINT CR4250 S6A819A
CRADLEPOINT CR4250-POE S6A820A
Terms of Service
Cradlepoint Terms of Service (https://cradlepoint.com/terms-of-service)
Cradlepoint Privacy Policy (https://cradlepoint.com/privacy-policy)
Return to the Top
Title
CR4250 High-Performance Branch Router Quick Start Guide
URL Name
CR4250-Getting-Started
Networking
(/s/topic/0TO38000000CEwBGAW/…
NetCloud Management
(/s/topic/0TO38000000Q3MAGA0/…
Cellular
(/s/topic/0TO38000000Q3MBGA0/…
Routing
(/s/topic/0TO38000000Q3MCGA0/r…
WiFi
(/s/topic/0TO38000000Q3MEGA0/…
Security
(/s/topic/0TO38000000Q3MGGA0/…
Mobile
(/s/topic/0TO38000000Q3MHGA0/…
No related lists to display
Follow
Ask a Question
11/2/2020 CR4250 High-Performance Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/CR4250-Getting-Started 5/5
AER2200 Branch Router Quick Start Guide (/s/article/AER2200 Getting Started) 19.85K
AER1600 Series Micro Branch Router Quick Start Guide (/s/article/AER1600-Series-Micro-Branch-Networking-Router) 9.92K
E300 Series Enterprise Branch Router Quick Start Guide (/s/article/E300-Series-Enterprise-Branch-Router-Quick-Start-Guide) 2.65K
E3000 Series Enterprise Branch Router Quick Start Guide (/s/article/E3000-Series-Enterprise-Branch-Router-Quick-Start-Guide) 1.85K
Trending Articles
Accessing the Setup Pages of a Cradlepoint Endpoint
(/s/article/NCOS-Accessing-the-Setup-Pages-of-a-CradlePoint-router)
How to Do Port Forwarding To Multiple Devices on the Same Port
(/s/article/How-to-Do-Port-Forwarding-To-Multiple-Devices-on-the-Same-Port)
IBR600C Series Quick Start Guide
(/s/article/COR-IBR600C-Series-Quick-Start-Guide)
Getting Started with NetCloud Manager
(/s/article/Getting-Started-with-NetCloud-Manager)
How To Set Custom DNS Servers Over a Routed OpenVPN Tunnel
(/s/article/How-To-Set-Custom-DNS-Servers-Over-a-Routed-OpenVPN-Tunnel)
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Cradlepoint Routeur sans fil
Cradlepoint
Cradlepoint MBR1200 Manuel utilisateur
Cradlepoint
Cradlepoint ARC CBA850 Manuel utilisateur
Cradlepoint
Cradlepoint WIPIPE MBR1000 Manuel utilisateur
Cradlepoint
Cradlepoint MBR1200 Manuel utilisateur
Cradlepoint
Cradlepoint COR IBR1100 series Manuel utilisateur
Cradlepoint
Cradlepoint WIPIPE MBR1000 Manuel utilisateur
Cradlepoint
Cradlepoint MBR1100 Manuel utilisateur
Cradlepoint
Cradlepoint MBR95 Manuel utilisateur
Cradlepoint
Cradlepoint CTR500 Manuel utilisateur
Cradlepoint
Cradlepoint CTR35 Manuel utilisateur
Cradlepoint
Cradlepoint COR IBR600 Manuel utilisateur
Cradlepoint
Cradlepoint CTR35 Manuel utilisateur
Cradlepoint
Cradlepoint MBR1200 Manuel utilisateur
Cradlepoint
Cradlepoint AER1600 Series Manuel utilisateur
Cradlepoint
Cradlepoint W2005 Manuel utilisateur
Cradlepoint
Cradlepoint ARC CBA850 Manuel utilisateur
Cradlepoint
Cradlepoint COR IBR600C Series Manuel utilisateur
Cradlepoint
Cradlepoint MBR1200 Manuel utilisateur
Cradlepoint
Cradlepoint MBR1200 Manuel utilisateur
Cradlepoint
Cradlepoint PHS300 Guide de dépannage
