Cradlepoint COR IBR1100 series Manuel utilisateur
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com 1
Vehicle Installation Guide /COR IBR9x0, IBR11x0, IBR1700
Mobile Routers
COR IBR9x0, IBR11x0, IBR1700
Vehicle Installation Guide
IBR900 IBR 1700IBR1100
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com 2
Vehicle Installation Guide /COR IBR9x0, IBR11x0, IBR1700
Introduction
The Cradlepoint COR Series mobile routers are compact, ruggedized,
3G/4G/LTE networking solutions designed for mission-critical
connectivity in the most challenging environments.
Ideal for in-vehicle networks including police cars, ambulances, and
mass transit, this cloud-managed solution provides organizations
the ability to scale deployments quickly and manage their vehicle
networks easily in real-time.
With an extensive list of safety and hardening certifications,
the COR Series mobile routers are engineered to protect against
extreme temperatures, humidity, shocks, vibrations, dust, water
splash, reverse polarity, and transient voltage.
You can also add dual-modem capability to your IBR900/950 or
IBR1100/1150 with the optional COR Extensibility Dock or Dual-
Modem Dock. The IBR1700 has an additional built-in MC400
modem slot and therefore does not require a dock for dual-modem
support. For more information, visit cradlepoint.com.
Power & GPIO
The Cradlepoint COR Series mobile routers include a two meter, 22 AWG direct wire
power and GPIO cable (includes ESD-protected general input and output pins):
This diagram shows the connector pinout. This is the view into the router (or the rear view of the cable connector):
Pin Definition Details Wire Color
1 Ground - Black
2Power 9–36 V DC Red
3 Input 3 V input high threshold (36 V tolerant) Orange
4 Output capable of sinking 250 mA Blue
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com 3
Vehicle Installation Guide /COR IBR9x0, IBR11x0, IBR1700
The wire colors shown are for the power/GPIO cable that is included with the COR Series mobile routers or available as
an accessory. Other wiring setups may have different colors.
If you need a power/GPIO cable that is longer than two meters, we recommend the following wire gauges (AWG):
+ 22 gauge wire for up to 4 meters (~13 ft)
+ 20 gauge wire for up to 6 meters (~20 ft)
+ 18 gauge wire for up to 12 meters (~40 ft)
For additional power source options, see the adapters and cables accessories page.
Ignition Sensing
Ignition sensing allows you to set the router to power on when the ignition key is turned to ACC/ON, and then power
off after the ignition key is turned off with a designated time delay. For example, set your router to remain on for an
hour after the vehicle is turned off and then shut off. When the vehicle is turned on again, the router will also turn
back on.
Edit these settings on the GPIO Connector administration page. Go to the configuration pages for your device or group
in NetCloud Manager (NCM) or log into the local device administration pages and go to System > GPIOs. Refer to your
product’s User Manual for GPIO configuration instructions.
Installation
The red wire (power) should connect to the positive (red) terminal of the battery, and the black wire (ground) should
connect to the chassis. To enable ignition sensing functionality, connect the orange wire (input) to the ignition, or
accessory, switch. The power and ignition wires can be attached directly or through the fuse panel.
The red power wire requires an inline fuse at 2.0 or 2.5 A. Either use an extra slot in the fuse panel
for this fuse, or splice an inline fuse directly into the wiring. Here is an example of how to attach
an inline fuse: http://youtu.be/RDOZT-dTITo.
Wire connections vary depending on the installation. Make sure your connectors are rated for the gauge of your wires
(e.g., the included power/GPIO cable is 22 AWG). See the sample crimp connectors at right, and see this video example
for how to attach a quick splice connector: http://youtu.be/zxt3LVpvjcw.
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com 4
Vehicle Installation Guide /COR IBR9x0, IBR11x0, IBR1700
IBR900
IBR1700
IBR1100
Antennas
Antennas are not included in the product package because of the diverse needs of customers. The COR Series mobile
routers have two connectors for 3G/4G modem antennas (SMA) and one connector for GPS (SMA):
Addtionally, the COR IBR900 and IBR1100 has two connectors for dual-band dual-concurrent 2.4/5 GHz WiFi (RSMA).
The IBR1700 has six RSMA connectors supporting a mix of dual-band and simultaneous tri-band WiFi.
See the Cradlepoint antenna accessories page for recommended options for antennas. Also see the Antenna Ordering
and Installation Guide, available as a PDF from the antenna and router product pages.
©Cradlepoint. All Rights Reserved. |+1.855.813.3385 |cradlepoint.com 5
Vehicle Installation Guide /COR IBR9x0, IBR11x0, IBR1700
Part # 170654-000 Part # 170653-000
Mounting
The mobile routers include four integrated mounting holes for secure mounting. We recommend the following
mounting screws:
+ For sheet metal installation, use #8 self-drilling screws.
+ For tapped holes, use M4 machine screws.
To mount the COR IBR900/950 with the optional COR Extensibility Dock or the IBR1100/1150 with the optional Dual-
Modem Dock, refer to the Quick Start Guides: COR Extensibility Dock & Dual-Modem Dock.
Vehicle Antenna Options
Antenna Type Mounting Recommended Antenna Part #
Modem, WiFi & GPS Screw 5-in-1 Screw-mount antenna (includes 3M cables)
• two 3G/4G modem
• two 2.4/5 GHz WiFi
• one GPS-GLONASS
170654-000
Modem & GPS Screw 3-in-1 Screw-mount antenna (includes 3M cables)
• two 3G/4G modem
• one GPS-GLONASS
170653-000
GPS Magnet GPS-GLONASS magnetic-mount antenna (includes 3M
cable)
170652-000
GPS Screw GPS-GLONASS Screw-mount antenna (includes 3M cable) 170651-000
Autres manuels pour COR IBR1100 series
3
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Cradlepoint Routeur sans fil
Cradlepoint
Cradlepoint COR IBR600 Manuel utilisateur
Cradlepoint
Cradlepoint COR IBR600 Manuel utilisateur
Cradlepoint
Cradlepoint WIPIPE MBR1000 Manuel utilisateur
Cradlepoint
Cradlepoint CBA250 Manuel utilisateur
Cradlepoint
Cradlepoint COR IBR600 Manuel utilisateur
Cradlepoint
Cradlepoint MBR1400 Series Manuel utilisateur
Cradlepoint
Cradlepoint AER2200 Series Manuel utilisateur
Cradlepoint
Cradlepoint MBR90 Manuel utilisateur
Cradlepoint
Cradlepoint MBR95 Manuel utilisateur
Cradlepoint
Cradlepoint CTR500 Manuel utilisateur
Cradlepoint
Cradlepoint MBRB Manuel utilisateur
Cradlepoint
Cradlepoint IBR1700 Manuel utilisateur
Cradlepoint
Cradlepoint MBR1200 Manuel utilisateur
Cradlepoint
Cradlepoint MBR1100 Manuel utilisateur
Cradlepoint
Cradlepoint E300-C18B Manuel du propriétaire
Cradlepoint
Cradlepoint AER1600 Series Manuel utilisateur
Cradlepoint
Cradlepoint MBR1400 Series Manuel utilisateur
Cradlepoint
Cradlepoint MBR1200 Manuel utilisateur
Cradlepoint
Cradlepoint WIPIPE MBR1000 Manuel utilisateur
Cradlepoint
Cradlepoint CTR35 Manuel utilisateur
