Cotek SR series Manuel utilisateur

SN-1 User’s Manual

SNMP Module for COTEK SR Series

Table of Content

1. INTRODUCTION

1-1. Main features 1

1-2. Hardware introduction 1

1-3. How to use Web-Server 2

1-4. SNMP V2C Description 7

2. INSTALLATION AND OPERATION 9

2-1. Installation of SN-1 9

2-2. Connecting from SN-1 to PC 9

2-3. Reset SN-1 to Default Value 10

3. TROUBLESHOOTING 11

4. WARRANTY 11

1. Introduction

1-1. Main features

SNMP : SN-1’s version is V2C. It can be connected to system with NMS, to

set up and monitor SR-Host parameters.

Web-Server : Using the browser to set up and monitor SR-Host parameters.

1-2. Hardware introduction

Description

Function

LED light

To display below operation status:

Green : Communicate with SR-Host successfully

Red : Fail to communicate with SR-Host

Reset Button

Go back to SN-1 default settings

RJ45

Connect to PC locally

Table 2.Panel introduction and terminal description

Fig. 1 Panel introduction (in mm)

(in mm)

1-3. How to use Web-Server

1-3-1 Web-Server introduction

Fig. 2 Web-Server

Main menu item description:

Status: To display SR-Host status *SR-Host:SR-1600、SRC-2500…

System Control: system output control

UI Configuration: RS232/ Interface language/ Login password

Inverter Configuration: Inverter parameter (settings ex.OVP/UVP…)

Network Configuration: SNMP network settings (DHCP/IP…)

SNMP Configuration: Community Name setup for SNMP V2C

Note! Note! Default login name: admin

Default login password: 0000

1-3-2 Status Page

Fig. 3 Status

Description

Function

Type

Model name

Inverter loading Capacity

Charge Current

SRC Inverter series only

Energy Graph

It displays the energy stream direction

1-3-3 System Control Page

Fig. 4 System Control

Power Switch: To control the power on/off of the Inverter.

1-3-4 UI Config Page

Fig. 5 UI Config

RS-485 Baudrate: To set RS-485 baudrate.

Password: 4 digits or characters password. (Default: 0000)

1-3-5 Inverter Config Page

Fig. 6 Inverter Config

You may change SR Host operation and protection setting in this page:

OVP Setting: Over Voltage Protection setting.

OVP Recovery: Over Voltage Protection Recovery setting.

UVP setting: Under Voltage Protection setting.

UVP Recovery: Under Voltage Protection Recovery

UV Alarm: Under Voltage Alarm.

O/P Voltage: Output Voltage setting.

O/P Current: Output Current setting.

Sync Frequency: Synchronize Frequency.

Sharing: AC input power ratio.

DC/AC mode: To set the power source priority from AC grid or battery.

VCHG: Battery charge voltage setting. * SRC Inverter series only

ICHG: Battery charge current setting. * SRC Inverter series only

1-3-6 Network Config Page

Fig. 7 Network Config

Description

Function

Host Name

SN-1 Network Name

Primary DNS

Primary Domain Name Server

Secondary DNS

Secondary Domain Name Server

Note! Incorrect network setting may cause SN-1 connection issue.

Please set the values back to default whenever issue arises

( Refer to 2-3 )

1-3-7 SNMP Config Page

Fig. 8 SNMP Config

Set SN-1 Community Name :

Read Comm1: Read Community Name 1.

Read Comm2: Read Community Name 2.

Read Comm3: Read Community Name 3.

Write Comm1: Write Community Name 1.

Write Comm2: Write Community Name 2.

Write Comm3: Write Community Name 3.

Note! After AC restart, Community Name will go back to default.

1-4. SNMP V2C Description

SNMP Agent Trap

Item

Description

trapReceiverIPAddress

NMS trap IP

trapCommunity

NMS trap community name.

trapEnable

If=0, Disable SN-1 trap , If =1, Enable SN-1 trap

trapTimeInterval

Setting the interval at which traps occur each time.

MAX = 65535 / per100ms, MIN = 1 / per100ms

Note! Please contact your COTEK local distributor for MIB file.

Note! After AC restart, trap will go back to default

Inverter-Status1

Bit Number

Description

Value Description

Bit 0

Low Battery Alarm

=0, No =1, Yes

Bit 1

Over Load Shutdown

=0, No =1, Yes

Bit 2

Over Load Alarm

=0, No =1, Yes

Bit 3

FAN Fault

=0, No =1, Yes

Bit 4

Temperature status

=0, Normal =1, Abnormal

Bit 5

Low Battery Voltage

=0, No =1, Yes

Bit 6

High Battery Voltage

=0, No =1, Yes

Bit 7

Machine Is Running

=0, Yes =1, No

Table 3 .Inverter-Status1

Inverter-Status2

Bit Number

Description

Value Description

Bit 0

Under Battery Voltage Protection

=0, No =1, Yes

Bit 1

Over Battery Voltage Protection

=0, No =1, Yes

Bit 2

Over Load Protection

=0, No =1, Yes

Bit 3

N/A

Bit 4

Over Temperature Protection

=0, No =1, Yes

Bit 5

Under Battery Voltage Alarm

=0, No =1, Yes

Bit 6

Over Battery Voltage Alarm

=0, No =1, Yes

Bit 7

Over Load Alarm

=0, No =1, Yes

Table 4 .Inverter-Status2

Inverter-Status3

Bit Number

Description

Value Description

Bit 0

N/A

Bit 1

Grid Voltage status

=0, Abnormal. =1, Normal

Bit 2

Inverter status

=0, Normal. =1, Abnormal

Bit 3

Software Reset

=0, Normal. =1, Software

Reset

Bit 4

Operating Voltage status

=0, Normal. =1, Abnormal

Bit 5

N/A

Bit 6

N/A

Bit 7

Locked Grid Frequency / Phase

=0, Abnormal. =1, Normal

Table 5. Inverter-Status3

Autres manuels pour SR series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cotek Unité de contrôle

Cotek

Cotek SN-1 PLUS Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur