Cortex GS9 Manuel utilisateur
GS9 Multi-station (Power
Rack and Cable Machine)
USER MANUAL
Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
NOTE:
This manual may be subject to updates or changes. Up to date manuals are available through our
website at www.lifespanfitness.com.au
3
TABLE OF
CONTENTS
I. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
II. Care Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
III. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
IV. Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
V. Exercise Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
VI. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TABLE OF CONTENTS |
4
I. IMPORTANT SAFETY
INSTRUCTIONS
WARNING: Read all instructions before using this machine.
•Install the product on a flat level surface.
•Place your unit on a solid, level surface when in use.
•Never allow children on or near the machine.
•Keep hands away from all moving parts.
•Never drop or insert any object into any openings.
•Care must be taken when lifting or moving the equipment so as not to injure your back. Always use
proper lifting techniques and/or seek assistance if necessary.
•Keep children and pets away from the machine at all times. DO NOT leave children unattended in the
same room with the machine.
•Only 1 person at a time should use the machine.
•If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the
workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
•Do not use the machine near water or outdoors.
•Keep hands away from all moving parts.
•Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing
that could become caught in the machine. Running or aerobic shoes are also required when using
the machine.
•Use the machine only for its intended use as described in this manual. DO NOT use attachments not
recommended by the manufacturer.
•Do not place any sharp objects around the machine.
•Disabled person should not use the machine without a qualified person or physician in attendance.
•Never operate the machine if the machine is not functioning properly.
•A spotter is recommended during exercise.
| IMPORTANT SAFETY INSTRUCTIONS
5
II. CARE INSTRUCTIONS
•Lubricate moving joints with silicon spray after periods of usage.
•Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects.
•The machine can be kept clean by wiping it down using dry cloth.
•Check and adjust the tension of wire rope on a regular basis.
•Regularly check all moving parts and make sure there are signs of wear and damage, if any the use of
the device must be stopped immediately and contact our after-sales department.
•During inspection, it is necessary to make sure that all bolts and nuts are completely fixed. If any bolt
or nut connection is loosened, please re-tighten.
•Check weld for cracks.
•Failure to perform daily maintenance may result in personal injury or equipment damage.
CARE INSTRUCTIONS |
6
III. ASSEMBLY INSTRUCTIONS
Unpack the carton and place all parts on the floor. Carefully remove all packing material and check each
part with the manual. Remember some parts are pre-fitted to larger components.
IMPORTANT:
Assemble with all nuts and bolts loose at first and only tighten after completing assembly steps.
NOTE:
Some of the smaller components may be pre-fitted to larger components.
Please check carefully before contacting us regarding any missing components.
33
40
23
5
1
24
40
34
32
39 25
40
37
9
23
40 40
33
19
34 40
34 40 24
25 39 36
3
35
40
40
37
37 40 22
3740
22
4
13
40
33
37 40
12
37
40
36 39 25 37
40
25 39
32 5
20
24 40 34
40 37
10
34
34
40
24 23
40
33
2
37 40
4023 33
6
40 34
| ASSEMBLY INSTRUCTIONS
7
•Connecting plate (22/23)
•Screw M10x90 (32)
•Screw M12x75(33)
•Screw M12x95 (34)
•Screw M12x100 (35)
•Flat washer Ф10 (39)
•Flat washer Ф12 (40)
•Lock nut M10 (36)
•Lock nut M12 (37)
b. Attach the Right vertical frame (2), the Right lower support frame (20), the Right grounding frame (4),
Rear stand (5), the Rear grounding frame (13) and the Right connecting frame (10) using:
•Connecting plate (22/23)
•Screw M10x90 (32)
•Screw M12x75 (33)
•Screw M12x95 (34)
•Screw M12x100 (35)
•Flat washer Ф10 (39)
•Flat washer Ф12 (40)
•Lock nut M10 (36)
•Lock nut M12 (37)
c. Attach the connecting frame (12) with the rear stand (5) using:
•Connecting plate (24)
•Screw M12x95 (34)
•Flat washer Ф12 (40)
•Lock nut M12 (37)
d. Attach the handle frame (6) with the left stand and the right stand (1/2) using:
•Connecting plate (24)
•Screw M12x95 (34)
•Flat washer Ф12 (40)
•Lock nut M12 (37)
a. Attach Left stand assembly (1), Rear stand assembly (5), Lower left support frame (19), Left
connecting frame (9), Left grounding frame (3) and Rear grounding frame (13) together using:
STEP 1
ASSEMBLY INSTRUCTIONS |
8
a. Install the Guide rod (16), Pulley frame (18), Sliding frame (11), Buffer pad (28), Support frame (17) and
Thick buffer pad (26) on the whole machine, using:
STEP 2
•Screw M10x85 (31)
•Flat washer Ф10 (39)
•Lock nut M10 (36)
31 39
16
18
11
28
17
26
3
39
369
| ASSEMBLY INSTRUCTIONS
9
a. Install the Barbell frame (14) on the complete machine, using Connecting plate (23), Screw M12x75
(33), Flat washer Ф12 (40) and Lock nut M12 (37).
b. Install the Elastic rope bracket (15) on the whole machine, using Screw M8x25 (29) Flat washer
Ф8 (38).
c. Install the Pulley (27) and Steel cable (21) as shown in the figure, using Screw M10x45 (30)
Flat washer Ф10 (39) Lock nut M10 (36).
d. Install the Limit bracket (7 / 8) as shown in the figure.
STEP 3
36
39
21
7
9
30
39
27
39 36
29
38 15
8
30
39
27
23
14
33
40
40
37
ASSEMBLY INSTRUCTIONS |
10
IV. PARTS LIST
No. Description Qty
1Left Stand 1
2Right Stand 1
3Left Grounding Frame 1
4Right Grounding Frame 2
5Rear Stand 2
6Handle Frame 1
7Left Limit Frame 1
8Right Limit Frame 1
9Left Connecting Frame 1
10 Right Connecting Frame 1
11 Sliding Frame 2
12 Connecting Frame 1
13 Rear Grounding Frame 1
14 Barbell Frame 4
15 Elastic Rope Rack 4
16 Guide Rod 4
17 Support Frame 4
18 Pulley Frame 2
19 Lower Left Support Frame 1
20 Lower Right Support Frame 1
No. Description Size Qty
21 Wire Rope 2
22 Connecting Plate 2
23 Connecting Plate 10
24 Connecting Plate 4
25 Connecting Plate 4
26 Cushion 4
27 Pulley 4
28 Cushion 4
29 Screw M8X25 4
30 Screw M10X45 4
31 Screw M10X85 4
32 Screw M10X90 4
33 Screw M12X75 20
34 Screw M12X95 12
35 Screw M12X100 4
36 Lock Nut M10 12
37 Lock Nut M12 36
38 Flat washer Φ8 4
39 Flat washer Φ10 24
40 Flat washer Φ12 72
| PARTS LIST
Table des matières
Autres manuels Cortex Équipement de fitness
Cortex
Cortex MF-4000 Manuel utilisateur
Cortex
Cortex SR-10 Manuel utilisateur
Cortex
Cortex Omega TAR-10 Manuel utilisateur
Cortex
Cortex LGE-10 Manuel utilisateur
Cortex
Cortex Omega SRP-10 Manuel utilisateur
Cortex
Cortex SM26 Multi Gym Manuel utilisateur
Cortex
Cortex CSAC-MATWALLH Manuel utilisateur
Cortex
Cortex Multi Gym SM25 Manuel utilisateur
Cortex
Cortex Omega BPC-10 Manuel utilisateur
Cortex
Cortex Omega LGP-10 Manuel utilisateur
Cortex
Cortex PR-4 Space Saver Folding Squat Power Rack Manuel utilisateur
Cortex
Cortex ARK06 Manuel utilisateur
Cortex
Cortex ARK05 Manuel utilisateur
Cortex
Cortex Omega LGC-10 Manuel utilisateur
Cortex
Cortex Omega Series Manuel utilisateur
Cortex
Cortex BN-11 Manuel utilisateur
Cortex
Cortex SM-10 Manuel utilisateur
Cortex
Cortex PT-150 POWER TOWER Manuel utilisateur
Cortex
Cortex GSL1 Manuel utilisateur
Cortex
Cortex SR-1 Manuel utilisateur
