Cooper Lighting AMETRIX ADY080863 Manuel utilisateur

access to bolts from side of fixture.

Using 1/4-20 x1" screws, secure mounting brackets to bottom

Brackets can be attached as shown or reversed allowing

of ballast enclosure.

Insert driver through

mounting holes in bracket

to secure brackets to ballast

enclosure.

Visor and Non-Visor

Sheet 1 of 3

performed by a certified electrician.

Warning

: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

mount fixtures ertically.

Installation Instructions

Do not

Roundel, XL

IN/OUTDOOR

( ase, Integral)

ADY080863 REV A(ECN080377)

Pre-installed

(x4)

1/4-20 bolts

1/4-20 nut

(x4)

1. After securing mounting brackets to ballast enclosure, slide

brackets over pre-installed 1/4-20 bolts in mounting

surface.(Refer to page 3 for mounting dimensions)

2. Using appropriate nuts, secure ballast enclosure to surface.

(x10)

1/4-20 x1"

Fixture door

screws

Exploded View and Part Call-Out

enclosure

Captive door

Aiming screw

(4x)

Securing Mounting Brackets

(2x)

(x12)

Integral ballast

Screw

cover plate

#10-32 x 1/2"

brackets (2x)

End cap

Pan head screws

Hex End bolt

Mounting

Ballast enclosure

(2x)

3/8-16 x1"

1/4-20 x1"

Screw

(4x)

Securing Ballast Enclosure to Surface

Aiming the Fixture

1. To aim fixture, unscrew end caps from fixture. Loosen both

1/4-20 x1" aiming screws on both sides of fixture. When yoke

indicator and fixture head indicator are lined up, the slope of

the lens face is 40-degrees. Each subsequent notch is an

additional 10-degrees.

2. When fixture is rotated to desired angle, re-tighten set screws

and replace end caps.

End cap

(x2)

Fixture head

indicator

Yoke arm

indicator

Wiring the Fixture

Ballast

cover plate

#10-32 x1/2"

Pan head screws

(x12)

1. Loosen all 12 screws and remove ballast box cover plate.

2. Attach appropriate wires ensuring all connections are properly

matched.

3. Secure ballast box cover plate using all twelve screws.

Securing Yoke Arms to Ballast Enclosure

1/4-20 x 1"

Pan head screws

(4x)

Yoke arms

(2x)

1. Attach yoke arms to ballast enclosure using all four 1/4-20x

1" Pan head screws.

Warning

: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

performed by a certified electrician.

Do not

mount fixtures ertically.

Installation Instructions

Sheet 2 of 3

Roundel, XL

IN/OUTDOOR

( ase, Integral)

Visor and Non-Visor

ADY080863 REV A(ECN080377)

3/8-16 x 1"

Hex end bolt

(x2)

1/4-20 x1"

Aiming screw

(x2)

End Cap

Fixture Wire

Securing Fixture Head

1. While firmly supporting fixture head, secure to yoke arms using

both 3/8-16 x1" hex end bolts.

2. Slide spacers between fixture head and yoke and secure

fixture head position using both 1/4-20 x1" aiming screws.

3. Insert fixture wire into compression fitting in ballast enclosure.

4. Replace end cap.

Aiming screw

spacer

(x2)

12 7

327.03

654.05

25 "

165.10

10.32

(4x)

704.85

"27 4

10 1

260.35

Warning

: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

performed by a certified electrician.

Do not

mount fixtures ertically.

Installation Instructions

Sheet 3 of 3

Roundel, XL

IN/OUTDOOR

( ase, Integral)

Visor and Non-Visor

ADY080863 REV A(ECN080377)

Mounting Plate Dimensions In[mm]

Lamping Size Chart

(lamps provided by others)

FIXTURE SIZE

(inches/ mm )

WATTAGE # OF

LAMPS LAMP TYPE LAMP DESCRIPTION

LAMP

(not to scale)

27/ 685.8 250W 1 ED28 Metal Halide

27/ 685.8 400W 1 ED28/BT37 Metal Halide

27/ 685.8 400W 2 ED28/BT37 Metal Halide

27/ 685.8 750W 1 BT37 Metal Halide

27/ 685.8 1000W 1 BT37 Metal Halide

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cooper Lighting Luminaire

Cooper Lighting

Cooper Lighting Metalux P410 Series Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo LZR510 Manuel utilisateur

Cooper Lighting

Cooper Lighting Neo-Ray 601-IW Manuel utilisateur

Cooper Lighting

Cooper Lighting Neo-Ray Europa 16-DIW Manuel utilisateur

Cooper Lighting

Cooper Lighting NEO-RAY 7 Manuel utilisateur

Cooper Lighting

Cooper Lighting 12X-HZB Series Manuel utilisateur

Cooper Lighting

Cooper Lighting Round Tapered Aluminum ADH061623 Manuel utilisateur

Cooper Lighting

Cooper Lighting Metalux T5 Manuel utilisateur

Cooper Lighting

Cooper Lighting Sure-Lites CU-1-R Series Manuel utilisateur

Cooper Lighting

Cooper Lighting Metalux WS Series Manuel utilisateur

Cooper Lighting

Cooper Lighting Quiet Ceiling QCT-1775BK Manuel utilisateur

Cooper Lighting

Cooper Lighting Ametrix Suspended Lighting Manuel utilisateur

Cooper Lighting

Cooper Lighting Metalux 248HO Manuel utilisateur

Cooper Lighting

Cooper Lighting IRiS M32T Manuel utilisateur

Cooper Lighting

Cooper Lighting Galleria Series CGWC Manuel utilisateur

Cooper Lighting

Cooper Lighting PM611cb Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo LZR311 Manuel utilisateur

Cooper Lighting

Cooper Lighting COMBOLIGHT LV3005IS Manuel utilisateur

Cooper Lighting

Cooper Lighting Metalux SM-TBW Manuel utilisateur

Cooper Lighting

Cooper Lighting TQS1000QD Manuel utilisateur

Cooper Lighting

Cooper Lighting PORTFOLIO M7815T Manuel utilisateur

Cooper Lighting

Cooper Lighting METALUX 2AC 232T8 Manuel utilisateur

Cooper Lighting

Cooper Lighting Portfolio HD7500QT4 Manuel utilisateur

Cooper Lighting

Cooper Lighting NEO-Ray FENESTRA 112R Manuel utilisateur

Manuels Luminaire populaires d'autres marques

Emos

Emos CLASSIC ZY1431T Manuel utilisateur

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuel utilisateur

Hedler

Hedler C 12 silent Manuel utilisateur

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuel utilisateur

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuel utilisateur

Lightmaxx

Lightmaxx Shaft 5R Manuel utilisateur

Triarch

Triarch 31083 Manuel utilisateur

Philips

Philips 32614 Series Manuel utilisateur

IKEA

IKEA TIVED Manuel utilisateur

Lightolier

Lightolier LP200 Manuel utilisateur

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuel utilisateur

Martin

Martin MAC 250 Krypton Manuel utilisateur

Stageline

Stageline ODW-2410RGBW Manuel utilisateur

Light Sky

Light Sky Tornado Series Manuel utilisateur

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuel utilisateur

Lightolier

Lightolier Lytespan 83ED17S Manuel utilisateur

Lightolier

Lightolier Calculite CS8226 Manuel utilisateur

ArtFox

ArtFox Beam 15R extreme Manuel utilisateur