Connect Tech CPG004 Manuel utilisateur

Connect Tech Inc. Tel: 519-836-1291

42 Arrow Road Toll: 800-426-8979 (North America only)

Guelph, Ontario Fax: 519-836-4878

N1K 1S6 Email: sales@connecttech.com

www.connecttech.com support@connecttech.com

CTIM-00122 Revision 0.01 2017-01-26

ComSync/PCI-104 Gen 3

Users Guide

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 2 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

Table of Contents

Table of Contents...................................................................................................................................2

Preface...................................................................................................................................................3

Customer Support Overview...........................................................................................................................3

Contact Information ........................................................................................................................................3

Limited Lifetime Warranty .............................................................................................................................4

Copyright Notice.............................................................................................................................................4

Trademark Acknowledgment..........................................................................................................................4

ESD Warning ..................................................................................................................................................5

Revision History ....................................................................................................................................5

Introduction...........................................................................................................................................6

Product Features and Specifications................................................................................................................6

Part Numbers / Ordering Information .............................................................................................................6

Product Overview..................................................................................................................................7

Block Diagram ................................................................................................................................................7

Connector & Jumper Summary & Locations ..................................................................................................7

Serial Data & Clocking Connectors........................................................................................................8

Signal Description...........................................................................................................................................9

Configuration Jumpers & Switches........................................................................................................9

PCI-104 Slot Selection....................................................................................................................................9

RS485, ½ Duplex Bias/Termination Selection..............................................................................................10

IO Cable..............................................................................................................................................10

ESCC DMA Data Transfers.................................................................................................................11

Detailed Technical Manual ..................................................................................................................11

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 3 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

Preface

Customer Support Overview

If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech

reseller from which you purchased the product. In most cases the reseller can help you with product installation

and difficulties.

In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you.

Our support section is available 24 hours a day, 7 days a week on our website at:

www.connecttech.com/sub/support/support.asp. See the contact information section below for more

information on how to contact us directly. Our technical support is always free.

Contact Information

Mail/Courier

Connect Tech Inc.

Technical Support

42 Arrow Road

Guelph, Ontario

Canada N1K 1S6

Email/Internet

[email protected]m

www.connecttech.com

Note:

Please go to the Download Zone or the Knowledge Database in the Support Center on the Connect Tech

website for product manuals, installation guides, device driver software and technical tips.

Submit your technical support questions to our customer support engineers via the Support Center on the

Connect Tech website.

Telephone/Facsimile

Technical Support representatives are ready to answer your call Monday through Friday, from 8:30 a.m. to

5:00 p.m. Eastern Standard Time. Our numbers for calls are:

Toll Free: 800-426-8979 (North America only)

Telephone: 519-836-1291 (Live assistance available 8:30 a.m. to 5:00 p.m. EST,

Monday to Friday)

Facsimile: 519-836-4878 (on-line 24 hours)

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 4 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

Limited Lifetime Warranty

Connect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this product, in

Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc.

will, at its option, repair or replace this product at no charge, provided that the product has not been subjected

to abuse, misuse, accident, disaster or non-Connect Tech Inc. authorized modification or repair.

You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business

partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must be

pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on the

outside of the package and sent prepaid, insured and packaged for safe shipment. Connect Tech Inc. will

return this product by prepaid ground shipment service.

The Connect Tech Inc. Lifetime Warranty is defined as the serviceable life of the product. This is defined as

the period during which all components are available. Should the product prove to be irreparable, Connect

Tech Inc. reserves the right to substitute an equivalent product if available or to retract Lifetime Warranty if no

replacement is available.

The above warranty is the only warranty authorized by Connect Tech Inc. Under no circumstances will

Connect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or other

incidental or consequential damages arising out of the use of, or inability to use, such product.

The information contained in this document is subject to change without notice. Connect Tech Inc. shall not

be liable for errors contained herein or for incidental consequential damages in connection with the furnishing,

performance, or use of this material. This document contains proprietary information that is protected by

another language without the prior written consent of Connect Tech, Inc.



2014 by Connect Tech, Inc.

Trademark Acknowledgment

Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this

document as the property of their respective owners. Not listing all possible trademarks or copyright

acknowledgments does not constitute a lack of acknowledgment to the rightful owners of the trademarks and

copyrights mentioned in this document.

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 5 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

ESD Warning

Electronic components and circuits are sensitive to

ElectroStatic Discharge (ESD). When handling any circuit

board assemblies including Connect Tech COM Express

carrier assemblies, it is recommended that ESD safety

precautions be observed. ESD safe best practices include,

but are not limited to:

Leaving circuit boards in their antistatic packaging

until they are ready to be installed.

Using a grounded wrist strap when handling circuit

boards, at a minimum you should touch a grounded

metal object to dissipate any static charge that may be

present on you.

Only handling circuit boards in ESD safe areas, which

may include ESD floor and table mats, wrist strap

stations and ESD safe lab coats.

Avoiding handling circuit boards in carpeted areas.

Try to handle the board by the edges, avoiding contact

with components.

Revision History

Revision

Date

Changes

0.00

2014-08-28

Preliminary Release

0.01

2017-01-26

Minor formatting changes

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 6 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

Introduction

The ComSync/PCI-104 Gen 3 is a 2-Port Synchronous and Asynchronous Serial board for PCI-104 computer

systems. Although it includes Asynchronous capability, its main focus is for Synchronous communications

protocols, like HDLC, MonoSync or BiSync.

The Serial controller device is an industry standard Zilog ESCC (8523L) which has been well known and

supported, for quite a long time. The ESCC’s main weak point is its small data FIFO’s, which limits maximum

data bit rates to 100 to 200 Kbps in most implementations.

This “Gen 3” board teams the ESCC with an FPGA which allows Serial Data to be transferred between the

ESCC and the system memory very quickly, thus realizing bit rates up to 2.6 Mbps.

Product Features and Specifications

Specifications

PCI-104 Board footprint

PCI-104 V1.1 and PC/104 V2.6 Compliant

Zilog ESCC (8523L)

Dual channel Synchronous Serial controller

FPGA

PCI-104 Bus interface with DMA support

Bit Rate

Up to 2.6 Mbps, depending on line interface, and serial mode settings

Data FIFO’s

512 bytes per port / direction

Line Interfaces

RS232, RS422, RS485

Industrial Temp operation

-40C to +85C

Part Numbers / Ordering Information

Part Number

CPG004

Standard Product

CPG005

CPG004 with Conformal coating

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 7 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

Product Overview

Block Diagram

Connector & Jumper Summary & Locations

Designator

Description

JTAG FPGA programming connector (not for user connection)

Port-1 Serial Data and Clocking signals

Port-2 Serial Data and Clocking signals

PCI-104 Bus Stack connector

SW1

PCI-104 Bus “Slot” selector

J1/J2

Port-1 RS485 Bias/Termination

J3/J4

Port-2 RS485 Bias/Termination

Alternate PCI-104 Bus “Slot” selector (not normally populated)

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 8 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

Serial Data & Clocking Connectors

Connectors P2 (for Port-1) and P3 (for Port-2) are used to connect between the ComSync/PCI-104 Gen 3 board

and the peripheral device. The following drawings show the orientation and pin assignments for these

connectors.

13 1

26 14

Pin 1

26 pin

Header

Pin#

RS422

(full duplex)

Signal

RS485

(½ duplex)

Signal

RS232

Signal

Direction

DB25

Connector

Pin# [1]

GND

---

TX+

TXRX+

TXD

I/O [4]

RX+

--- [2]

RXD

Input

RTS+

--- [2]

RTS

Output

CTS+

--- [2]

CTS

Input

--- [2]

DSR

Input

GND

---

--- [2]

DCD

Input

RTxC+

--- [2]

Input

TRxC+

--- [2]

I/O [3]

--- [2]

TRxC

Input

N/C

---

N/C

---

N/C

---

TX-

TXRX-

--- [2]

I/O [4]

RX-

--- [2]

Input

RTS-

--- [2]

Output

CTS-

--- [2]

Input

N/C

---

--- [2]

DTR

Output

N/C

RTxC

Input

RTxC-

--- [2]

Input

TRxC-

--- [2]

I/O [3]

SYNC [5]

Input

N/C

---

N/C

---

Notes:

[1] A cable can be provided to adapt the 26 pin header to a 25 pin D connector.

[2] Do NOT connect (pin is carrying an image of another signal).

[3] Input or Output in RS422 or RS485 modes, output only in RS232 mode.

[4] Input or Output in RS485 mode, otherwise an Output.

[5] Always RS232 level signal in all modes.

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 9 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

Signal Description

Signal Name

Signal Description

Mode Used

GND

Signal Ground

All

TXD

Transmit Data

RS232

TX+

Transmit Data (+)

RS422

TX-

Transmit Data (-)

RS422

TXRX+

Transmit / Receive Data (+)

RS485

TXRX-

Transmit / Receive Data (-)

RS485

TRxC

Transmitter Data Clock

RS232

TRxC+

Transmitter Data Clock (+)

RS422, 485

TRxC-

Transmitter Data Clock (-)

RS422, 485

RTxC

Receiver Data Clock

RS232

RTxC+

Receiver Data Clock (+)

RS422, 485

RTxC-

Receiver Data Clock (-)

RS422, 485

DTR

Data Terminal Ready

RS232

DSR

Data Set Ready

RS232, 485

RTS

Request To Send

RS232,

RTS+

Request To Send (+)

RS422

RTS-

Request To Send (-)

RS422

CTS

Clear To Send

RS232

CTS+

Clear To Send (+)

RS422

CTS-

Clear To Send (-)

RS422

SYNC

Receiver Sync

All

N/C

Pin Not Connected

---

Configuration Jumpers & Switches

PCI-104 Slot Selection

A rotary switch enables selection of the PCI-104 bus slot, as defined in the PCI-104 or PC/104-Plus

Specifications. Positions 0 through 3 select the 4 possible slots. The other positions just mirror the first 4

selections.

Switch

Position

Slot

Number

0,4,8,C

1,5,9,D

2,6,A,E

3,7,B,F

ComSync/PCI-104 Gen 3

Users Guide

www.connecttech.com

Document: CTIM-00122

Revision: 0.01

Page 10 of 11

Connect Tech Inc. 800-426-8979 | 519-836-1291

Date: 2017-01-26

RS485, ½ Duplex Bias/Termination Selection

Each port, has a pair of jumpers which enable bias and termination resistors to be applied to the differential

TX/RX± signal pair. J1/J2 for Port-1 and J3/J4 for Port-2. High resistance biasing is always applied when the

jumpers are not installed. The circuit is implemented as follows. These jumpers should be removed for RS422

(full duplex) and RS232 modes of operation. The RX± and CTS± signals have the high resistance (100K) bias

applied permanently.

The jumpers are usually applied in pairs, but they can be used individually for special situations.

Port-1 Port-2

IO Cable

Cable assembly CBG001 (CTIC-00055) can be used with the ComSync PCI-104 Gen 3 product. It provides a

DB-25 style of connector. The pin assignments for this cable are shown in the table above.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Connect Tech Matériel informatique

Connect Tech

Connect Tech Xtreme/104 Plus Manuel utilisateur

Connect Tech

Connect Tech Rogue-X2 Manuel utilisateur

Connect Tech

Connect Tech NGX012 Manuel utilisateur

Connect Tech

Connect Tech FPD-Link III Manuel utilisateur

Connect Tech

Connect Tech ComSync/104 Manuel utilisateur

Connect Tech

Connect Tech Xtreme/10G Manuel utilisateur

Connect Tech

Connect Tech FreeForm/Express S6 Manuel utilisateur

Connect Tech

Connect Tech SMARC 2.0 Carrier Manuel utilisateur

Connect Tech

Connect Tech SSD/104 SATA Manuel utilisateur

Connect Tech

Connect Tech Blue Heat/PCI PCI Serial Communications Manuel utilisateur

Connect Tech

Connect Tech Sentry-X Manuel utilisateur

Connect Tech

Connect Tech FREE FORM/PCI-104 104 Manuel utilisateur

Connect Tech

Connect Tech NVIDIA Jetson TX2 Manuel utilisateur

Connect Tech

Connect Tech NVIDIA Jetson TX2 Manuel utilisateur

Connect Tech

Connect Tech CANpro/104 Manuel utilisateur

Connect Tech

Connect Tech NVIDIA Jetson AGX Xavier GMSL Manuel utilisateur

Connect Tech

Connect Tech NVIDIA Jetson TX2 Manuel utilisateur

Connect Tech

Connect Tech BLUESTORM UNIVERSAL PCI Manuel utilisateur

Connect Tech

Connect Tech NVIDIA Jetson GMSL Camera Platform Manuel utilisateur

Connect Tech

Connect Tech FreeForm/PCI-104 Manuel utilisateur

Connect Tech

Connect Tech CANpro/104-Plus Opto Manuel utilisateur

Connect Tech

Connect Tech Xtreme/104-Express Manuel utilisateur

Connect Tech

Connect Tech Rudi-NX Manuel utilisateur

Connect Tech

Connect Tech CTIM-00080 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur