Coniu Go GL865 Manuel utilisateur

Dear customer,

this is a short description to give you some basic informa-

tions about the GSM modem you purchased.

Informations to the AT commands you will find on the CD

as a PDF file. As well informations can be downloaded

from our website www.coniugo.com. Those documents

can be read and printed with the Adobe Acrobat Reader.

GPRS GSM modem: modem module GL865

UMTS/HSPA- modem: modem module UL865

LTE modem: modem module HE910

Introduction / Declaration of Conformity

Thank you for buying the ConiuGo GSM/GPRS-modem. This product was produced

according to the latest technology. It is a device suited for data transmission in GSM

networks

The manufacturer is:

ConiuGo® GmbH

Berliner Strasse 4A

16540 Hohen Neuendorf

This product is labelled with the CE-mark according to following standards:

EU-guidelines 73/23/EWG of February 19th 1973, EU-guidelines 89/336/EWG of

May 3rd 1989 (EMV-guideline) changed by EU-guidelines 91/263/EWG,

92/31/EWG, 93/68/EWG, EU-guidelines 89/392/EWG of June 14th 1989 changed by

EU-guidelines 91/368/EWG, 93/44/EWG, 93/68/EWG

EN 61000-6-4/01 German basic standard for RF-emission for industrial application,

EN 61000-6–2/05 German basic standard for RF-immission for industrial application

This product is manufactured according to the quality standard DIN EN ISO 9001.

This product includes a GSM transceiver unit from a third-party manufacturer. It is

CE-certified by it’s own manufacturer.

To ensure a safe operation of the modem, please read this ma-

nual carefully before taking it into operation

Hohen Neuendorf, August 2015

Table of contents

1. Limited Warranty / Limitation of Liability...............................................4

2. Use as agreed ...........................................................................................5

3. Safety notes ..............................................................................................6

4. Description of the modem .......................................................................7

5. Installation of the modem........................................................................7

Electrical installation ............................................................................7

7. Insert the SIM- card ..................................................................................8

9. Setup of a modem- connection.............................................................16

10. Examples for basic AT- commands...................................................16

11. Troubleshooting ...................................................................................17

1. Limited Warranty / Limitation of Liability

ConiuGo GmbH warrants its product to be free from defects in materials and work-

manship under normal use and service for a period of two years from the date of de-

livery, if no other agreement was made. The warranty is limited to the repair or re-

placement, at ConiuGo`s sole option. The costs of parts and labour are covered in

case of a repair. Costs for mounting and de-mounting, as well as for return transport

to ConiuGo GmbH are not covered.

This limited warranty will apply only to ConiuGo GmbH products that exhibit normal

use and service and will not cover any damages resulting from any misuse, modifi-

cation, disassembly or alteration. Proof of purchase must accompany the product re-

turned for consideration under this warranty.

Any use of the modem is carried out at your own risk. In no event shall ConiuGo be

liable for incidental or consequential damages, including, without limitation, loss to

property other than the ConiuGo GmbH product, loss of the use of the ConiuGo

GmbH product or other property, or other economic loss.

Damages resulting from neglect of this manual are not covered

by the warranty. ConiuGo GmbH is not liable for any conse-

quential damage.

ConiuGo is not liable for damages to property or personal inju

ries resulting from improper use or neglect of the safety war-

nings. Such events are not covered by the warranty.

2. Use as agreed

The modem is designed for use in Germany and the European Community. Accor-

ding to the rules of CE-conformity, it is not allowed to distribute this device without a

manual in the national language. The manual has to be authorised by the manufac-

turer. Any distributor has to make sure that the user of the device is capable to un-

derstand the manual as regards the content and the language.

The modem has to be installed and put into operation by com-

petent technicians.

The modem is designed according to the valid GSM standards. At the use of this

modem all safety precautions necessary for GSM devices have to be taken into

account. It is not allowed to switch on the modem in airplanes or hospitals. Please

check carefully any possible influences the modem may have on other technical and

electronic devices.

The modem has to be installed and put into function by technical experts. All notes

and information of this manual have to be read carefully and followed strictly. In case

of doubt don’t put the device into function but consult the manufacturer or your au-

thorised distribution agent.

GSM devices are able to ignite explodable or inflammable gases by electromagnetic

radiation. The use of the modem in an environment with a potential for these condi-

tions must be definitely excluded.

Because of the RF-radiation of a GSM device the modem has to be used with a

suitable GSM antenna for the RF band of 900 MHz (or 1800 MHz depending of the

type of the chosen GSM network). The antenna cable has to be free from any dama-

ges.

Safety hints have to be regarded!

3. Safety notes

The modem corresponds to broadly valid GSM standards. At the use of a GSM

transceiver for the mobile communication, certain safety precautions have to be

made.

GSM products can ignite explosive or inflammable gases.

The use of the modem in an environment with a potential for these conditions must

be definitely excluded.

The system must be switched off in airplanes or hospitals.

The system must be switched off in cars or vehicles, because

an irritation of car electronics be RF radiation is possible.

Before connecting the product, possible interference of the

modem on your existing technical equipment has to be in-

quired.

The manufacturer provides a product for integration in a technical assembly. The

product is tested carefully according to the CE-certification to meet the standards

mentioned in the Declaration of Conformity. Nevertheless, the electromagnetic be-

haviour of the modem is depending on the conditions of mounting and environment.

The electromagnetic behaviour of the m

dem depends on the

environmental not controlled by the manufacturer. Any liability

for eventual electronic misbehaviour is excluded.

Because of the RF

radiation of the GSM unit the modem has to

be used with a suitable GSM antenna for the RF band, depen-

ding on the type of the chosen GSM network). The antenna ca-

ble has to be free from any damages.

4. Description of the modem=

The modem is a GSM modem for data-, fax- and SMS- transfer in GSM networks.

From the moment the modem is booked into the provider’s network the device be-

haves like a standard modem or a fax modem. The configuration of the system is

carried out via the V.24 serial port resp. the USB-connection. For programming the

standard AT-commands according to ETSI-standards (ETSI 07.07 or ETSI 07.05)

are used.

The modem is dedicated to applications several GSM networks and depends on the

core module that is indicated on the product label (Dualband: 900/1800 MHz, Quad-

band: 850/900/1800/1900 MHz, UMTS: with 2100 MHz).

5. Installation of the modem

The modem must be installed only in dry places. The allowed range of temperature

is –30 to +60 °C. The common regulations for electrical installations have to be re-

garded.

The modem is allowed to be run according to the following conditions:

•Ambient temperature: –30 to +60 °C

•Indoor use only, max. 70% RH

•SIM-card with appropriate service subscription (e.g. for data transmission:

subscription for data transmission).

•GSM/GPRS GL865, recommended and preset baudrate is: 8N1 / 38.400

•UMTS UL865, recommended and preset baudrate is 8N1 / 115.200

•LTE LE910, recommended and preset baudrate is 8N1 / 115.200

6. Electrical installation

Power supply

This information is given by the product label.

Connection

LAN / Ethernet- Port, 2 LED as indication for the communication with the

network.

Antenn

MMCX-, FME- or SMA- Coaxial connector (depending on modem version)

7. Insert the SIM- card

Make sure that you have a SIM-card activated for all required services (e.g. CSD

data call with a separate calling ID)

Place the Modem-unit as shown and insert the SIM-card into the SIM-card reader.

Note that the contacts of the SIM card have to be placed upside. Do not touch the

connectors of the SIM card with your fingers. It can lead to contact problems or

damage from static discharges.

Abb.1 Abb.2=

8. Configuration of the LAN- Port

When delivered the LAN- modem is pre-configurated and the LAN- port is addressa-

ble with the following IP- setting:

IP-addresse: 192.168.1.100

Subnet- maske: 255.255.255.0

Port: 10001

All network- an functional- settings are accessible to be changed according to the

needs of a user-case:

Two ways for changes are possible:

1.) Configuration by using a webinterface

Please use the IP- address oft he device in your browser (e.g. the IP- address

192.168.1.100)

http://192.168.1.100

No user name and password are neccessary. Please directly press „OK“

When delivered the LAN- modem is pre-configured as follws:

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Coniu Go Unité de contrôle

Coniu Go

Coniu Go GSM Scout Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur