Conceptronic CM3S Guide de démarrage rapide

www.conceptronic.net

Page 1 of 3

Conceptronic CM3S Firmware Upgrade Instructions

for firmware version 1.58D

A. Upgrade information

The Conceptronic CM3S is equipped with an upgradeable firmware chip. This function makes it possible to

improve the device and to add new features.

Note: The firmware upgrade procedure is at your own risk. Even though a firmware upgrade can

improve the device and add new features, there’s a small possibility of an upgrade failure

which makes the device unusable.

. Upgrade procedure

1. Copying the firmware files to the CM3S

1.1 If ou have downloaded the firmware upgrade from www.conceptronic.net, ou have a ZIP file

containing a folder named ‘Firmware’ and three documentation files.

1.2 Connect the CM3S to our computer with the USB cable.

1.3 Cop the ‘Firmware’ folder including all its content to the hard disk of the CM3S.

1.4 Remove the CM3S from our computer with the ‘Safely remove hardware’ option.

1.5 Disconnect the USB cable of the CM3S and turn it off with the switch on the back side.

www.conceptronic.net

Page 2 of 3

2. Updating the firmware

2.1 Connect the CM3S to a TV or monitor.

2.2 Turn the CM3S on with the switch on the back.

2.3 Select the ‘Firmware’ folder b using the navigation buttons on the remote control.

A confirmation screen will be displa ed asking if ou want to replace the current firmware with a

new one. Choose ‘Yes’. The upgrade process will start. This is visible in the upper left corner

with the terms ‘ERASE’ and ‘WRITE’.

Note: The C 3S must not be turned off during the upgrade process. Doing so will

result in an unusable product which is not covered by the warranty.

2.4 As soon as the upgrade process is completed, the screen will go black.

Note: The device is still turned on. You need to manually turn off the device by pressing the

‘POWER’ button on the remote control. You can completely turn the device off by

turning off the switch on the back side of the device.

3. Removing the ‘Firmware’ folder

3.1 Connect the CM3S to our computer with the USB cable.

3.2 Remove the ‘Firmware’ folder from the hard disk. This makes sure the CM3S won’t start

updating again when the ‘Firmware’ folder is selected on our TV or monitor.

3.3 Remove the CM3S from our computer with the ‘Safely remove hardware’ option.

3.4 Disconnect the USB cable from the CM3S and turn it off with the switch on the back side.

4. Checking the current firmware version

4.1 Make sure the CM3S is connected to a TV or monitor.

4.2 Press the “SETUP” button on the remote control.

4.3 Highlight the “FIRMWARE VERSION” option. The firmware version is displa ed on the lower left

corner. This should be “CM3S_FW_VER_1.58D”.

4.4 If the displa ed version isn’t the same as the version described at point 4.3, then ou need to

repeat the upgrade procedure as described in chapter B.

www.conceptronic.net

Page 3 of 3

C. Release notes

1.58D March 6, 2009

Added:

- Support for NTFS hard disk. Please note that the cop function has been disabled in this firmware,

since this does not work in combination with NTFS.

Improved:

- Hard disk space indicator in the root has been removed to increase boot time performance.

1.57D August 27, 2008

Fixed:

- When the amount of files in a folder exceeds 99, the total amount is displa ed as “Á” in stead of the

actual number.

Improved:

- Boot time.

1.57 July 7, 2008

-Initial release.

Autres manuels pour CM3S

Table des matières

Autres manuels Conceptronic Lecteur multimédia

Conceptronic

Conceptronic CFULLHDMAi Manuel utilisateur

Conceptronic

Conceptronic CM3HD Manuel utilisateur

Conceptronic

Conceptronic CMT2D Manuel utilisateur

Conceptronic

Conceptronic CM2H Manuel utilisateur

Conceptronic

Conceptronic CSM3PL Guide de démarrage rapide

Conceptronic

Conceptronic CM3PVR Guide d'installation et d'utilisation

Conceptronic

Conceptronic CM3H Manuel utilisateur

Conceptronic

Conceptronic CMED3PLUS Guide de démarrage rapide

Conceptronic

Conceptronic CMED2PRO Manuel utilisateur

Conceptronic

Conceptronic CFULLHDMA Manuel utilisateur

Conceptronic

Conceptronic CM3PVRL Manuel utilisateur

Conceptronic

Conceptronic CM3S Manuel utilisateur

Conceptronic

Conceptronic cm3pvrd Guide d'installation et d'utilisation

Conceptronic

Conceptronic Media Giant Guide de l'utilisateur

Conceptronic

Conceptronic Media Giant CM3G Series Manuel d'utilisation et d'entretien

Conceptronic

Conceptronic CM3PVR Guide de démarrage rapide

Conceptronic

Conceptronic CSM3NET Manuel utilisateur

Conceptronic

Conceptronic CMED3PLAY Manuel utilisateur

Conceptronic

Conceptronic Media Giant Manuel utilisateur

Conceptronic

Conceptronic Media Giant Guide de démarrage rapide

Conceptronic

Conceptronic cm3pvrd Guide de démarrage rapide

Conceptronic

Conceptronic C54WMP Manuel utilisateur

Conceptronic

Conceptronic CSM3PL Guide de démarrage rapide

Conceptronic

Conceptronic CM3PVR Manuel utilisateur

Manuels Lecteur multimédia populaires d'autres marques

Visual Land

Visual Land Impulse Manuel utilisateur

limHD

limHD 200i Manuel utilisateur

Transcend

Transcend DMP10 Manuel utilisateur

Philips

Philips GoGear Muse SA2MUS08 Manuel utilisateur

Fantec

Fantec MM-HDRL Manuel utilisateur

Dune HD

Dune HD Duo 4K Manuel utilisateur

IAdea

IAdea HMP-505S Manuel utilisateur

Camos

Camos MMS-1000 Manuel utilisateur

Energy

Energy 75 Series Manuel utilisateur

Z3 Technology

Z3 Technology DME-03 Manuel utilisateur

Sony

Sony SVR-2000 Guide de l'utilisateur

Meicheng

Meicheng HD-1080K12 Manuel utilisateur

DENAFRIPS

DENAFRIPS ARCE Manuel utilisateur

Topaz

Topaz CMS Media Player Instructions d'utilisation

InFocus

InFocus LightCast Manuel utilisateur

IconBiT

IconBiT XDS1003D Manuel utilisateur

Quanmax

Quanmax QDSP-2090 Series Manuel utilisateur

Samsung

Samsung MP-80S Manuel utilisateur