Conceptronic Cm3pvrd Guide d'installation et d'utilisation

www.conceptronic.net

Page 1 of 4

How to Record from embedded DVB-T TV tuner with Conceptronic CM3PVRD

This how to document describes how you can connect and use your CM3PVRD to record digital channels from

a TV with embedded DVB-T tuner (from now on it will be referred to in this document as TVDVB-T .

ATTENTI N: This feature can only be used in certain TV models, not all TV models will allow you to

record from an embedded DVB-T tuner. Please refer to your TV manufacturer’s manual

about this.

Important

As mentioned before not all TVs with embedded DVB-T tuner have the needed connections to allow the

CM3PVRD to record digital channels.

It’s mandatory that your TV have some kind of video output to allow the CM3PVRD to record digital channels.

It could happen that the video output from your TV is just an analog tuner signal instead of DVB-T. If so,

please check with your TV manufacturer for a correct configuration.

Please check if your TV has a video output available in the TV manufacturer’s manual.

Follow the next steps to watch and record digital channels from the TV embedded DVB-T tuner with your

CM3PVRD.

Step 1: Connecting TVDVB-T to Conceptronic CM3PVRD

We will use a composite cable (yellow, white, red and RCA to SCART adaptor. These cables are included

with your CM3PVRD.

www.conceptronic.net

Page 2 of 4

In this example we use connection EXT1(RGB) as video output from TVDVB-T.

Connect the SCART adaptor to the video output of your TV. Connect one side of the composite cable to the

SCART adaptor and the other side to the AV Input “IN” of your CM3PVRD.

Note: Make sure that the RCA to SCART adaptor is set to OUTPUT mode.

Step 3: Connecting Conceptronic CM3PVRD to TV

Refer to chapter 6 (“Connecting the CM3PVRD” in the CM3PVRD manual on how to connect the CM3PVRD to

your TV.

www.conceptronic.net

Page 3 of 4

Step 4: Recording from TVDVB-T

When all cable connections have been made turn on your CM3PVRD and TVDVB-T. The menu of the CM3PVRD

will be shown on your TV. If this is not the case, refer to chapter 7 (“First-Time Configuration” of the

CM3PVRD manual.

There are two methods to record from a digital TV tuner. The first one is to start recording instantly and the

second one is to schedule a recording.

Instant recording ( ne Touch Record)

1. Press button ‘4’ on the remote control of the CM3PVRD or select the ‘AV input’ icon from the

CM3PVRD menu. When the TVDVB-T tuner is on, you will see the video from the embedded DVB-T

tuner on your TV.

2. Use the remote control from TVDVB-T to select the (digital channel from which you want to start

recording.

3. Press the red ‘REC RD’ button on the remote control of the CM3PVRD to start recording

instantly.

4. To stop recording, press the ‘ST P’ button on the remote control of the CM3PVRD.

Note: Do not turn off the CM3PVRD or TVDV -T during the recording. Also do not press any buttons on

either of the remote controls or devices itself. Doing so might result in an incomplete recording.

www.conceptronic.net

Page 4 of 4

Scheduled recording

1. Press button ‘6’ on the remote control of the CM3PVRD or select the ‘Rec. Schedule’ icon from

the CM3PVRD menu. The CM3PVRD will enter the recording schedule page and automatically

select an empty recording slot.

2. Press the ‘ENTER’ button on the remote control of the CM3PVRD and use the ‘UP’ and ‘D WN’

buttons to select ‘AV’ as input. Press the ‘ENTER’ button again to go to the next option.

3. Select the recording date with the ‘UP’ and ‘D WN’ buttons and use the ‘ENTER’ button to

confirm.

4. Select the start time and use the ‘ENTER’ button to confirm.

5. Select the end time and use the ‘ENTER’ button to confirm.

6. Select the target and quality for the recording and use the ‘ENTER’ button to confirm.

Note: When using a US stick or memory card, please make sure there is enough space available for the

recording. If there is not enough space available, you can change the quality of the recording to

reduce space. Refer to the last pages of the CM3PVRD manual (“Product Specifications”) for a

list of required space with each quality.

7. When all settings are correct, the ‘STATUS’ field at the left of the screen will mention ‘READY’.

8. Now press the ‘MENU’ button to return to the main menu and press the power button on the

remote control of the CM3PVRD to set it in stand-by mode.

Note: Do not use the switch on the back of the CM3PVRD to turn off the device, since it will not be able

to turn on itself when a recording needs to be started. The device always needs to be in stand-by

mode when a recording is scheduled.

9. Make sure the TVDVB-T is set to the right channel for the recording and leave it turned on.

Autres manuels pour cm3pvrd

Table des matières

Autres manuels Conceptronic Lecteur multimédia

Conceptronic

Conceptronic CMED3PRO Manuel utilisateur

Conceptronic

Conceptronic CFULLHDMA Manuel utilisateur

Conceptronic

Conceptronic Media Giant Guide de l'utilisateur

Conceptronic

Conceptronic Media Giant Guide de démarrage rapide

Conceptronic

Conceptronic CM3HD Manuel utilisateur

Conceptronic

Conceptronic CSM3PL Guide de démarrage rapide

Conceptronic

Conceptronic CMED3PLUS Guide de démarrage rapide

Conceptronic

Conceptronic CM3PVR Manuel utilisateur

Conceptronic

Conceptronic CM3PVR Guide d'installation et d'utilisation

Conceptronic

Conceptronic Grab'n'Go MediaGiantPlus CM3GP Manuel utilisateur

Conceptronic

Conceptronic CFULLHDMAi Manuel utilisateur

Conceptronic

Conceptronic cm3pvrd Manuel utilisateur

Conceptronic

Conceptronic Grab'n'GO 3,5" Manuel utilisateur

Conceptronic

Conceptronic CMED2PLAY Manuel utilisateur

Conceptronic

Conceptronic CM3PVRL Manuel utilisateur

Conceptronic

Conceptronic CM3H Manuel utilisateur

Conceptronic

Conceptronic CSM3PL Guide de démarrage rapide

Conceptronic

Conceptronic cm3pvrd Guide de démarrage rapide

Conceptronic

Conceptronic CMED3PLAY Manuel utilisateur

Conceptronic

Conceptronic cm3pvrd Guide de démarrage rapide

Conceptronic

Conceptronic CM3PVR Guide de démarrage rapide

Conceptronic

Conceptronic CM3S Manuel utilisateur

Conceptronic

Conceptronic CM3S Guide de démarrage rapide

Conceptronic

Conceptronic C54WMP Manuel utilisateur

Manuels Lecteur multimédia populaires d'autres marques

Visual Land

Visual Land Impulse Manuel utilisateur

limHD

limHD 200i Manuel utilisateur

Transcend

Transcend DMP10 Manuel utilisateur

Philips

Philips GoGear Muse SA2MUS08 Manuel utilisateur

Fantec

Fantec MM-HDRL Manuel utilisateur

Dune HD

Dune HD Duo 4K Manuel utilisateur

IAdea

IAdea HMP-505S Manuel utilisateur

Camos

Camos MMS-1000 Manuel utilisateur

Energy

Energy 75 Series Manuel utilisateur

Z3 Technology

Z3 Technology DME-03 Manuel utilisateur

Sony

Sony SVR-2000 Guide de l'utilisateur

Meicheng

Meicheng HD-1080K12 Manuel utilisateur

DENAFRIPS

DENAFRIPS ARCE Manuel utilisateur

Topaz

Topaz CMS Media Player Instructions d'utilisation

InFocus

InFocus LightCast Manuel utilisateur

IconBiT

IconBiT XDS1003D Manuel utilisateur

Quanmax

Quanmax QDSP-2090 Series Manuel utilisateur

Samsung

Samsung MP-80S Manuel utilisateur

Conceptronic cm3pvrd Guide d'installation et d'utilisation

Manuels Lecteur multimédia populaires d'autres marques