Compex WPJ344 Manuel utilisateur

•

CompexWRT and OpenWRT firmware supported

•

Qualcomm-Atheros 533MHz Networking Processor,WASP Series

•

Dual Radio Solution (one 2x2 11n 2.4GHz on-board radio and one miniPCIe

slot that supports all Compex WLE series, including 802.11ac radio)

•

Integrated 48V 802.3af (alternative 24V PoE available)

•

Support 2 x Gigabit Ethernet Port

•

Optional: support USB Extension

Dual Band Gigabit Wireless Embedded Board

Model: WPJ344

Applications

•

Dual Band, Dual Concurrent AP

•

802.11bgn AP

•

Point to Point / Point to MultiPoint

•

Base Station

•

CPE

ac wave series

Features

Technical Specifications

System Information

Processor

Qualcomm-Atheros AR9344 MIPS 74Kc

System Memory

128MB(64*2) DDR2

NOR Flash

8MB (max 16MB optional)1

MiniPCI Slot

1 x 9.2mm MiniPCIe slot

Ethernet

2 Gigabit ports with Auto-MDI/X

Extras

Serial Port2, JTAG3, Reset Button, Surge Arrestor, Watchdog Timer

Power Solutions

High voltage

DC Jack Input:24-48V, Passive PoE: 24-48V, IEEE 802.3af/at PoE

Standard 802.3af PoE input:(Optional)4

Low voltage

DC Jack Input: 9-24V, Passive PoE: 12-24V

Power Consumption

RoHS Compliance

Yes

Humidity

Operating: 5% to 95% (non-condensing)

Storage: Max.90% (non-condensing)

Temperature Range

Operating:-20ºC to 70ºC

Storage: -40ºC to 90ºC

Dimension

117 x 105 x 17 (mm)

2.4GHz

On-board Radio

Transmit

Power

Data Rate

Aggregate Power

25dBm

11M

23dBm

25dBm

54M

22dBm

HT20 MCS0

25dBm

HT20 MCS7

22dBm

HT40 MCS0

25dBm

HT40 MCS7

22dBm

Receiver

Sensitivity

Data Rate

-90dBm

54M

-75dBm

HT20 MCS0

-90dBm

HT20 MCS7

-72dBm

HT40 MCS0

-88dBm

HT40 MCS7

-70dBm

Max of concurrent

associations

Encryption

Client

Latency

TCP

[each client upload and download

randomly from 384Kbps to 768Kbps]

UDP

[each client upload

and download 2Mbps]

WPA2-PSK

<100ms

Single radio

Dual radio

Single radio

Dual radio

40 clients

70clients

(35 per radio)

20 clients

30clients

(15 per radio)

1 Depends on Order Configurations

2 Serial Port is a 4-pin header (TTL) + Serial Converter is available to change the TTL signals on board to RS232 signals

for debugging.Configurations are subjec to change without notification

3 JTAG Port is a 14-pin header + JTAG kit is for writing your own developed loader and firmware directly

4 In this mode, it can be powered from 802.3af/3at PoE switches and PoE injectors. It is able to return a PD classification

of 0. The DC jack can accept a voltage range of 24V to 56V but the PoE input needs a minimum voltage of 36V

Related Products

802.11ac 5GHz miniPCIe

Gigabit Power over Ethernet

WLE900VX

WLE600V5-23

WLE900V5-23

POE2408

- Output Voltage: 24VDC

- Max Output Watts: 19W

Optional configuration

USB Extension

(USB HUB BOARD-1.00-ST)

USB board

External board:

can support 3 x USB 2.0 ports and

1 x miniPCIe-based USB 2.0 only interface

(e.g. 3G modems)

PSE pass-thru module

(P-PSE-M-6A03-SPL)

PSE pass-thru module: Optional module to

allow power to pass through the 2nd Ethernet

port to an IEEE 802.3af/at compatible device,

such as a surveillance camera

Model

Extended applications

USB signal

USB External board

(USB HUB BOARD-1.00-ST)

802.3af PoE pass-thru

802.3af

PoE power supply

WPJ344

Support 1× USB 2.0 port

support 3 x USB 2.0 ports

and

1 x miniPCIe-based USB

2.0 only interface

Optional

(PSE pass-thru module)

support

WPJ558

Support 1× USB 2.0 port

PCIe slot Support Third

Party 3G/LTE Module

support 3 x USB 2.0 ports

and

1 x miniPCIe-based USB

2.0 only interface

support

WPJ342

Support 1× USB 2.0 port

PCIe slot Support Third

Party 3G/LTE Module

Optional

(802.3af module)

WPJ531

Support 1× USB 2.0 port

PCIe slot Support Third

Party 3G/LTE Module

Optional

(802.3af module)

WP546

Support 2× USB 2.0 port

Optional

(PSE pass-thru module)

support

WP543

Support 2× USB 2.0 port

support

Compex embedded board extended applications list

Product application:

Camera

Gigabit Power over Ethernet

PSE pass-thru module

WPJ344 with PSE pass-thru module

WPJ344 with USB External board

can support 3 x USB 2.0 ports or

1 x miniPCIe-based USB 2.0 only interface

Dimension Drawing

Ordering Information

Item Code

Version

PSE module

L/H voltage Power

NOR Flash

Memory

WPJ344HV 6A06PC8128BR

CompexWRT

High Voltage (48V)

8MB

128MB

WPJ344LV 6A06PC8128BR

CompexWRT

Low Voltage (24V)

WPJ344HV 6A6BCW8128BRPSE

CompexWRT

Yes

High Voltage (48V)

WPJ344LV 6A6BCW8128BRPSE

CompexWRT

Yes

Low Voltage (24V)

WPJ344HV 6A06PC16128BR

CompexWRT

High Voltage (48V)

16MB

128MB

WPJ344LV 6A06PC16128BR

CompexWRT

Low Voltage (24V)

P-PSE-M-6A03-SPL

PoE pass-Thru module

USB HUB BOARD-1.00-ST

USB External board

Compex Systems Pte Ltd

135 Joo Seng Road #08-01

Singapore 368363

Tel: +65 6286 2086

Fax: +65 6280 9947

Email: sales@compex.com.sg

Compex (Suzhou) Co Ltd

No.12 ChuangTou Industrial Square

LouFeng North, Suzhou Industrial Park

Suzhou, Jiangsu Province China 215122

Tel: +86 512 62950050

Fax: +86 512 62950026

www.compex.com.sg

www.facebook.com/compexsystems

of COMPEX Inc. While every effort is made to ensure the information is accurate, Compex does not accept

liability for any errors or mistakes that may arise. All specifications are subject to change without notice.

Dimension Drawing with USB external board

Federal Communications Commission (FCC) Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this

equipment.

RF exposure warning

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a