Compaq TFT5000 Manuel utilisateur
USER’S GUIDE
COMPAQ TFT5000 FLAT PANEL MONITOR
Part Number: 325703-001 - Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:01 PM
File Path: P:\Docs\Monitors\Aoki\325705U1
Notice
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE
LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of
this guide may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.
1999 Compaq Computer Corporation.
All rights reserved. Printed in Taiwan.
Compaq and Deskpro are registered in the U. S. Patent and
Trademark Office.
Microsoft, MS-DOS, Windows, Windows NT, and other names of
Microsoft products referenced herein are trademarks or registered
trademarks of Microsoft Corporation.
ENERGY STAR is a U.S. registered mark.
Product names mentioned herein such as Pivot Software may be
trademarks and/or registered trademarks of their respective
companies.
The software described in this guide is furnished under a license
agreement or nondisclosure agreement. The software may be used or
copied only in accordance with the terms of the agreement.
Third Edition (March 1999)
Compaq Computer Corporation
User’s Guide
Compaq TFT5000 Flat Panel Monitor
English 1-1
ttttt
Part Number: 325703-002 Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
English
Product Features
The Compaq TFT5000 Flat Panel Monitor has an active matrix, thin-
film transistor (TFT), liquid crystal display (LCD). The monitor
features include:
15-inch (38.1-cm) viewable area display
1024 × 768 resolution, plus full-screen support for lower
resolutions
Wide viewing angle to allow viewing from a sitting or standing
position, or when moving side-to-side
Tilt, swivel, and height adjustment capabilities
Monitor panel rotates 90 degrees to display portrait mode
Pivot 90-degree rotation software included on CD-ROM
Removable base for flexible mounting solutions
Plugs into a standard VGA connector; does not require a special
graphics adapter card
Plug and Play capability if supported by your system
On-Screen Display (OSD) adjustments in six different
languages: English, Dutch, French, German, Italian, and Spanish
for ease of set-up and screen optimization
Programmable Sleep Timer
CD-ROM includes an information file (INF), Image Color
Matching file (ICM), the Compaq LCD Display Assistant setup
and configuration utility, the Compaq Display LiteSaver utility,
Pivot software, and product documentation
Model with additional protective panel available
Security lock slot
AssetControl
Energy Saver feature for Energy Star compliance
1-2 English
Part Number: 325703-002- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
Compliance with the following regulated specifications:
Swedish MPR II 1990
EPA ENERGY STAR
European Union CE Directives
Swedish TCO 1995
Universal Driver Manager
This monitor may require a graphics driver (and/or .INF file) that is
compatible with your computer’s graphics adapter. The CD-ROM
included with this monitor contains an .INF file (see the section on
Information Files). Compaq has also created a Universal Driver
Manager (UDM) release that supports all graphics adapters found on
Compaq Deskpro and Compaq Workstation products. The UDM eases
graphics driver deployment across Compaq platforms ensuring cross-
compatibility and backward-compatibility. The resulting solution
enables customers to manage and control ongoing software
maintenance costs. The UDM is available on the Compaq Support
Software CD for Compaq Desktop, Portable, and Workstation
Products and the Compaq World Wide Web site (www.compaq.com).
Information Files
This monitor includes a CD-ROM with two information files that
should be installed onto your computer—an .INF file and an .ICM file.
The .INF file defines monitor resources and provides specifications
used by Microsoft Windows 95 and Windows 98 to install support
software for certain hardware devices. The .INF file ensures monitor
compatibility and optimization with your computer’s graphics adapter.
The .ICM file provides color matching consistency from monitor
screen to printer and is activated from within the graphics programs
that have this feature. To install these files on your computer, follow
the instructions on the “Configuring Your Compaq LCD Monitor”
card located in the Program License Agreement packet along with the
CD-ROM. INF file updates are downloadable by clicking on:
www.compaq.com/products/monitors/index.html
English 1-3
Part Number: 325703-001- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then follow
these steps:
1. Place the monitor in a convenient, well-ventilated location near
your computer.
2. Connect the monitor signal cable 1on the rear panel of the
monitor to the 15-pin connector on the rear panel of the
computer and tighten the screws.
Be sure the signal cable aligns with the 15-pin connector.
Do not force the cable onto the connector or you may
damage the signal cable.
3. Connect one end of the AC power cord 2to the AC adapter and
the other end to an electrical outlet that is easily accessible and
close to the monitor.
CAUTION: When connecting the monitor, be sure to use the
AC adapter supplied with the monitor. Failure to use this
AC adapter may result in damage to the monitor.
1-4 English
Part Number: 325703-002- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
!WARNING: To reduce the risk of electric shock or damage
to your equipment:
Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed)
electrical outlet that is easily accessible at all times.
Disconnect power from the monitor by unplugging
the power cord from the electrical outlet.
For security purposes, this monitor has been fitted with a
slot 3for use with a security cable lock that can be
purchased separately at most computer stores.
After you turn on the monitor, install the Compaq LCD
Display Assistant utility included on the CD-ROM. Use
the on-screen instructions to adjust the picture quality of
your monitor. To install this utility onto your computer,
follow the instructions on the “Configuring Your Compaq
LCD Monitor” card located in the Program License
Agreement packet.
IMPORTANT: Always activate a screen saver program, the program-
mable sleep timer, the Compaq Display LiteSaver utility, or turn off
the monitor when it is not in use for a prolonged period of time. All
LCD monitors that display the same static image on the screen for a
prolonged period of time may exhibit screen image retention. Please
note that image retention is not a permanent condition and will fade
over a period of time. Image retention is a condition that may occur on
all LCD screens.
English 1-5
Part Number: 325703-001- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
Adjusting the Monitor Height
To raise the monitor to the desired height:
Place one hand on the side of the monitor panel, press the
adjustment button located on the neck, and lift the monitor panel
to the correct height.
To lower the monitor to the desired height:
Position your hand to support the bottom of the monitor panel,
press the adjustment button located on the neck, and lower the
monitor panel.
CAUTION: ALWAYS support the bottom of the monitor
panel with one hand when lowering the monitor panel.
1-6 English
Part Number: 325703-002- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
Rotating the Monitor Panel
The monitor panel can be rotated 90 degrees as shown below. This is
an added feature for use with software that displays portrait
dimensions on-screen instead of landscape dimensions. The Pivot
software package included on the Compaq CD-ROM should be
installed on the computer to accommodate matching screen rotation.
To rotate the monitor panel to portrait mode:
1. Raise the monitor panel to its highest height to avoid bumping the
panel on the desk.
2. Place your hand on the side of the monitor panel and turn the panel
clockwise.
To rotate the monitor panel back to landscape mode, rotate the monitor
panel counter-clockwise.
Installing the Pivot Software
To install the Pivot rotation software:
1. Insert the Compaq CD-ROM into the CD drive on your computer.
2. Using Microsoft Windows as your operating system, go to
StartRunand type x:\Pivot\Setup.exe (where x is the letter
designating the CD-ROM drive) in the Open box and click OK.
English 1-7
Part Number: 325703-001- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
After installing the Pivot rotation software on your computer, a
monitor icon will appear on the right side of the Microsoft Windows
Taskbar at the bottom of your screen.
To rotate the screen contents:
1. Click on the monitor icon appearing in the Windows Taskbar.
2. Click on Rotate.
To return the screen to its original dimensions, repeat this procedure.
The monitor icon also activates the monitor Display
Properties dialog box.
1-8 English
Part Number: 325703-002- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
Operating the Monitor
Front Panel Controls
No./Icon Control Function
1Menu button 1. Launches first and second-level on-screen menus.
2. Exits menus and on-screen display.
2Minus button Selects and adjusts the functions.
3Plus button Selects and adjusts the functions.
4Power switch Turns the monitor on and off.
5Power LED 1. Green indicates monitor is turned on.
2. Yellow indicates Suspend mode.
3. Amber indicates Sleep mode.
4. Blinking Amber indicates Sleep Timer*.
*Sleep Timer enables you to set a time for the monitor to
power on and power off at the same time every day. It
eliminates the need to turn off the monitor at the end of the
day and conserves energy. To set this mode, refer to the
Sleep Timer in the on-screen display.
Table des matières
Autres manuels Compaq Moniteur
Compaq
Compaq 5017 - TFT - 15" LCD Monitor Manuel utilisateur
Compaq
Compaq CV5500 Manuel utilisateur
Compaq
Compaq 8000 - Elite Convertible Minitower PC Manuel utilisateur
Compaq
Compaq MV 540 Manuel utilisateur
Compaq
Compaq Compaq S710 Manuel utilisateur
Compaq
Compaq S920 Manuel utilisateur
Compaq
Compaq P1100 Manuel utilisateur
Compaq
Compaq TFT 1501 Manuel utilisateur
Compaq
Compaq P700 Manuel utilisateur
Compaq
Compaq 7020 Manuel utilisateur
Compaq
Compaq Compaq P1610 Manuel utilisateur
Compaq
Compaq TFT8030 Manuel utilisateur
Compaq
Compaq FP745A Manuel utilisateur
Compaq
Compaq 151FS - QVision - 15" CRT Display Manuel utilisateur
Compaq
Compaq P1210 Manuel utilisateur
Compaq
Compaq Q2009 - Compaq - Widescreen LCD Monitor Comment utiliser
Compaq
Compaq MV-920 Manuel utilisateur
Compaq
Compaq P900 Manuel utilisateur
Compaq
Compaq TFT5010R Instructions d'utilisation
Compaq
Compaq V50 Manuel utilisateur
