Comnet CWGE26FX2TX24MSPOE Manuel utilisateur

INSTALLATION AND OPERATION MANUAL

CWGE26FX2TX24MSPOE

(22) 10/100/1000 BASE-T(X) + (2) GIGABIT COMBO PORTS +

(2) 100/1000 BASE-FX WITH POWER OVER ETHERNET (POE+)

The ComNet™CWGE26FX2TX24MSPOE is an extended temperature commercial

grade Managed Ethernet Switch. It provides IEEE 802.3at PoE to twenty-four

10/100/1000BASE-T(X) two of which are also gigabit combo ports supporting

100/1000FX SFP Modules. A further two 100/1000FX SFP ports are also included.

Up to 400 watts of PoE power is available for distribution across all 24 electrical

ports. All SFP ports utilize ComNet SFPs for fiber and connector type and distance.

The CWGE26FX2TX24MSPOE is a redundant switch offering multiple Ethernet

redundancy protocols to protect your applications from network interruptions or

temporary malfunctions by redirecting transmission within the network.

INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 2

INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE

TECH SUPPORT: 1.888.678.9427

Contents

About This Guide 5

Related Documentation

The following documentation is also available:

»CWGE26FX2TX24MSPOE Data sheet

»SFP Modules Data sheet

About ComNet

ComNet develops and markets the next generation of video solutions for the CCTV, defense, and

homeland security markets. At the core of ComNet’s solutions are a variety of high-end video

servers and the ComNet IVS software, which provide the industry with a standard platform for

analytics and security management systems enabling leading performance, compact and cost

effective solutions.

ComNet’s products are available in commercial and rugged form.

Website

For information on ComNet’s entire product line, please visit the ComNet website at

http://www.comnet.net

Support

For any questions or technical assistance, please contact your sales person (sales@comnet.net) or

the customer service support center (techsupport@comnet.net)

Safety

»Only ComNet service personnel can service the equipment. Please contact ComNet Technical

Support.

»The equipment should be installed in locations with controlled access, or other means of

security, and controlled by persons of authority.

INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 6

INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE

TECH SUPPORT: 1.888.678.9427

Overview

Introduction

The CWGE26FX2TX24MSPOE Gigabit managed redundant ring PoE Ethernet switch with

22x10/100/1000Base-T(X) IEEE802.3at PSE ports and two Gigabit combo IEEE802.3at PSE ports

and 2x100/1000Base-X SFP ports supports Ethernet Redundancy protocol, C-Ring (recovery

time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible). It can protect your

mission-critical applications from network interruptions or temporary malfunctions with its fast

recovery technology. The CWGE26FX2TX24MSPOE also supports Power over Ethernet (PoE+),

a system to transmit electrical power up to 30 watts, along with data, to remote devices over

standard twisted-pair cable in an Ethernet network.

INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 7

INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE

TECH SUPPORT: 1.888.678.9427

Software Features

»C-Ring (recovery time < 30ms over 250 units of connection)

»MSTP (RSTP/STP compatible) for Ethernet Redundancy

»24 ports PSE fully compliant with IEEE802.3at standard, providing up to 30 Watts per port

»IEEE 1588v2 clock synchronization

»Provides HTTPS/SSH protocol to enhance network security

»IP-based bandwidth management

»application-based QoS management

»Device Binding security function

»IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic

»SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management

»ACL, TACACS+ and 802.1x User Authentication for security

»9.6K Bytes Jumbo Frame

»SFP ports support DDM function

»Multiple notification for warning of unexpected event

»Web-based Telnet, Console (CLI), and Windows utility (eConsole) configuration

»LLDP Protocol

»19 inch rack mountable design

INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 8

INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE

TECH SUPPORT: 1.888.678.9427

Hardware Features

»450 Watts power supply included

»Operating Temperature: –10 to 60ºC

»Storage Temperature: – 40 to 85ºC

»Operating Humidity: 5% to 95%, non-condensing

»22 × 10/100/1000Base–T(X)

»2 × 100/1000Base-X SFP & 10/100/1000Base–T(X) COMBO

»2 × 100/1000 Base-X SFP

»Console Port

»Dimensions: 43.1 × 34.2 × 4.4 cm (16.97 × 13.47 × 1.73 in)

INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 9

INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE

TECH SUPPORT: 1.888.678.9427

Hardware Overview

Front Panel

The following table describes the labels on the CWGE26FX2TX24MSPOE

Port Description

Gigabit SFP ports 2 x 100/1000Base-X on SFP port

Combo Ports 2 x 100/1000Base-X SFP & 10/100/1000Base-T(X) Combo

Gigabit Ethernet Ports 22 x 10/100/1000Base–T(X)

Console Use RS-232 with DB-9 connecter to manage switch.

28 75

1 3 4

CWGE26FX2TX24MSPOE

1. Console port (DB-9 Female connector)

2. 10/100/1000Base-T(X) Gigabit Ethernet ports

3. LED for Odd Numbered Ethernet ports Link/Act status

4. LED for Even Numbered Ethernet ports Link/Act status

5. 100/1000Base-X SFP & 10/100/1000Base–T(X) Combo

6. PoE Status LED

7. 100/1000Base-X SFP Port

8. Front panel LED Status:

»LED for PWR The LED lights on when the power module is activated.

»LED for Fault When the fault occurs, the amber LED will be light on.

»LED for R.M. (Ring master). Indicates that the switch is the Master of the Ring.

»LED for Ring Indicates that the C-Ring is activated.

INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 10

INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE

TECH SUPPORT: 1.888.678.9427

Rear Panel

The rear panel of CWGE26FX2TX24MSPOE

1. Power Switch

2. Power input for AC 100V~240V / 50~60Hz

Rack mount kit assembly

You can find the rack mount kit and the screws in the packing box. Please assembly the rack

mount kit on the switch with screws as shown below:

Table des matières

Autres manuels Comnet Changer

Comnet

Comnet CNGE4US Manuel utilisateur

Comnet

Comnet CNFE4SMSPOE Manuel utilisateur

Comnet

Comnet CLFE4+2SMS Series Manuel utilisateur

Comnet

Comnet CWGE24MS Manuel utilisateur

Comnet

Comnet RELIANCE RLGE2FE16R Manuel utilisateur

Comnet

Comnet CNGE28FX4TX24MSPOE+ Manuel utilisateur

Comnet

Comnet CNGE2FE16MS Manuel utilisateur

Comnet

Comnet CNGE11FX3TX8MS Manuel utilisateur

Comnet

Comnet CWGE10FX2TX8MSPOE Manuel utilisateur

Comnet

Comnet CNFE4+1SMS2POE Manuel utilisateur

Comnet

Comnet CNGE2+2SMS Manuel utilisateur

Comnet

Comnet CLFE IPS Series Manuel utilisateur

Comnet

Comnet CNGE28FX4TX24MS Series Manuel utilisateur

Comnet

Comnet CWGE24MODMS Manuel utilisateur

Comnet

Comnet CWGE28FX4TX24MS Manuel utilisateur

Comnet

Comnet CNGE4TX4US/M Manuel utilisateur

Comnet

Comnet CNFE5SMS Manuel utilisateur

Comnet

Comnet CNXE2GE2TX8MSPOE Manuel utilisateur

Comnet

Comnet CNGE2+2SMS Manuel utilisateur

Comnet

Comnet CNGE3FE8MSPOEHO Manuel utilisateur

Comnet

Comnet CNGE2FE8MSPOE2 Manuel utilisateur

Comnet

Comnet CNGE2FE24MSPOE Manuel utilisateur

Comnet

Comnet CNGE8MS Manuel utilisateur

Comnet

Comnet CNXE2GE2TX8MSPOE Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur