Comnet CNGE24FX12TX12MSPOE Manuel utilisateur

QUICK START GUIDE

CNGE24FX12TX12MS[POE]

Industrial Grade Managed Ethernet Switch w/

12 × 100/1000Base-FX + 12 × 10/100/1000Base-TX Ports

w/ Optional 30W PoE

The ComNet CNGE24FX12TX12MS[POE] has twelve 100/1000Base-FX SFP* ports

and twelve 10/100/1000Base-TX ports. All SFP ports utilize ComNet SFP modules

for fiber and connector type and distance. The IEEE802.3-compliant unit offers

multiple Ethernet redundancy protocols (MSTP/RSTP/STP/ERPS (G.8032)) which

protect your applications from network interruptions or temporary malfunctions by

redirecting transmission within the network. The switch provides advanced IP-based

management that can limit the maximum bandwidth for each connected IP device,

allowing the user to adjust usage. Application-based QoS can set a higher priority

for data streaming. The Device-Binding function can prevent unauthorized network

access, increasing security.

The CNGE24FX12TX12MSPOE models provide twelve electrical ports supporting up to

thirty watts of power. All PoE ports are IEEE 802.3at compliant.

Each model is provided with redundant power inputs which can be either one mains

voltage and one or two low voltage DC inputs or two low voltage DC inputs.

Rev. 2.22.18

This guide serves the following

ComNet Model Numbers:

CNGE24FX12TX12MS

CNGE24FX12TX12MSPOE

QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 2

QUICK START GUIDE CNGE24FX12TX12MS[POE]

TECH SUPPORT: 1.888.678.9427

Contents

Regulatory Compliance Statement 3

Warranty 3

Disclaimer 3

Safety Information 4

Hardware Installation 5

Rack mount kit assembly 5

Hardware Overview 6

Power Supply 7

Front Panel LEDs 7

WEB Management 8

QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 3

QUICK START GUIDE CNGE24FX12TX12MS[POE]

TECH SUPPORT: 1.888.678.9427

Regulatory Compliance Statement

Product(s) associated with this publication complies/comply with all applicable regulations. Please

refer to the Technical Specifications section for more details.

Warranty

ComNet warrants that all ComNet products are free from defects in material and workmanship

for a specified warranty period from the invoice date for the life of the installation. ComNet will

repair or replace products found by ComNet to be defective within this warranty period, with

shipment expenses apportioned by ComNet and the distributor. This warranty does not cover

product modifications or repairs done by persons other than ComNet-approved personnel, and

this warranty does not apply to ComNet products that are misused, abused, improperly installed,

or damaged by accidents.

Please refer to the Technical Specifications section for the actual warranty period(s) of the

product(s) associated with this publication.

Disclaimer

Information in this publication is intended to be accurate. ComNet shall not be responsible for its

use or infringements on third-parties as a result of its use. There may occasionally be unintentional

errors on this publication. ComNet reserves the right to revise the contents of this publication

without notice.

QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 4

QUICK START GUIDE CNGE24FX12TX12MS[POE]

TECH SUPPORT: 1.888.678.9427

Safety Information

»Only ComNet service personnel can service the equipment. Please contact ComNet Technical

Support.

»The equipment should be installed in locations with controlled access, or other means of

security, and controlled by persons of authority. When operating at temperatures above 51º C, the

equipment surfaces will be hot to the touch. Installation in restricted access location is required

for this case.

»For POE models requiring a power supply not labeled LPS, the unit should be installed in a

restricted access location using a 60950-1, 2nd Edition + Am. 1 + Am. 2 Certified power supply

rated for the ambient temperature in which it is installed. Total derated power rating should be

greater than the sum of the attached loads plus 30 W for the switch.

»Use CDRH compliant SFP modules when using fiber connectivity with this device.

»When used in Australia or New Zealand, the product is certified for intra building applications

only, and should not be directly connected to network cables with outside plant routing.

Hardware Installation

Rack mount kit assembly

You can find the rack mount kit and the screws in the packing box. Please assembly the rack

mount kit on the switch with screws as shown below:

QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 5

QUICK START GUIDE CNGE24FX12TX12MS[POE]

TECH SUPPORT: 1.888.678.9427

Hardware Overview

1 2 3 4

CNGE24FX12TX12MS[POE] Front Panel

Call-out Description

1Status LED

212 × 10/100/1000Base-TX RJ45 Ports

310 × 100/1000Base-FX SFP Ports

42 × 100/1000/2500Base-FX SFP Ports

5USB Console Port

123 4

CNGE24FX12TX12MS[POE] Rear Panel

Call-out Description

11 × Mains Power Switch

21 × 90-240 VAC Mains Power Input

32 × 6-14 VDC or 48-57 VDC (model dependent) Redundant Power Input 2-Pin Terminal Block Connector

4Fault Relay 2-Pin Terminal Block Connector

QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 6

QUICK START GUIDE CNGE24FX12TX12MS[POE]

TECH SUPPORT: 1.888.678.9427

Power Supply

For CNGE24FX12TX12MS Models, Power Supply must be 6 to 14 VDC @ 30 W max or 90-240 VAC

mains.

For CNGE24FX12TX12MSPOE Model, Power Supply must be 48 to 57 VDC @ 390 W max or

90-240 VAC mains.

IMPORTANT SAFEGUARDS:

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating

ambient temperature of the rack environment may be greater than room ambient. Therefore,

consideration should be given to installing the equipment in an environment compatible with

the maximum ambient temperature (Tma) specified by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air

flow required for safe operation of the equipment is not compromised.

Front Panel LEDs

LED Color Status Description

Status Green On Switch is operational

Gigabit Ethernet ports

Link Amber On Port in Full Duplex mode

Activity Green Blinking Data transmitted

Gigabit SFP ports

Link/Activity Green Blinking Data transmitted

QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 7

QUICK START GUIDE CNGE24FX12TX12MS[POE]

TECH SUPPORT: 1.888.678.9427

WEB Management

Attention: While installing and upgrading firmware, please remove physical loop connection first.

DO NOT power off equipment while the firmware is upgrading!

Configuration by Web Browser

About Web-based Management

An embedded HTML web site resides in the flash memory on the CPU board. It contains

advanced management features and allows you to manage the switch from anywhere on the

network through a standard web browser such as Microsoft Internet Explorer.

Preparing for Web Management

The default value is as below:

IP Address: 192.168.10.1

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.10.254

User Name: admin

Password: admin

System Login

1. Launch web browser.

2. Type h t tp: //192 .168.10.1. Press Enter.

3. The login screen appears.

4. Key in the username and password. The default username and password is admin.

5. Select Enter or OK button, then the main interface of the Web-based management appears.

Warning – Any changes made to the settings will apply only to the current running

configuration of the switch and will be lost in the event of a power cycle.

To save any changes made to persistent memory please go to “Maintenance ¦

Configuration ¦ Save startup-config” to write the changes to the switches startup

configuration.

3 CORPORATE DRIVE | DANBURY, CT 06810 | USA

T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET

8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE

T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET

MECHANICAL INSTALLATION INSTRUCTIONS

ComNet Customer Service

Customer Care is ComNet Technology’s global service center, where our

professional staff is ready to answer your questions at any time.

Email ComNet Global Service Center: customercar[email protected]

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Comnet Routeur réseau

Comnet

Comnet reliance RL1000GW Manuel utilisateur

Comnet

Comnet CWGE2FE8MSPOE Manuel utilisateur

Comnet

Comnet CLFE4US1TPC Manuel utilisateur

Comnet

Comnet CNFE4+1SMSM2 Manuel utilisateur

Comnet

Comnet CWGE9MS Manuel utilisateur

Comnet

Comnet RLXE4GE24MODMS Manuel utilisateur

Comnet

Comnet netwave NW3 Guide de configuration

Comnet

Comnet CNGE24MS-OB Manuel utilisateur

Comnet

Comnet NW7/M Manuel utilisateur

Comnet

Comnet CNGE3FE7MS4 Manuel utilisateur

Comnet

Comnet CNGE8FX4TX4MS Manuel utilisateur

Comnet

Comnet CWGE24MS2 Manuel utilisateur

Comnet

Comnet CWGE2FE24MODMS Manuel utilisateur

Comnet

Comnet CNGE3FE8MS Manuel utilisateur

Comnet

Comnet CLFE4+1SMS[POE](C Manuel utilisateur

Comnet

Comnet RLXE4GE24MODMS Manuel utilisateur

Comnet

Comnet CWFE8MS/DIN Manuel utilisateur

Comnet

Comnet CNFE10MS Manuel utilisateur

Comnet

Comnet CNGE11FX3TX8MS Manuel utilisateur

Comnet

Comnet CNGE24MS Manuel utilisateur

Comnet

Comnet CWFE8TX8MS Manuel utilisateur

Comnet

Comnet CNGE8US Series Manuel utilisateur

Comnet

Comnet CNGE3FE8MSPOE Manuel utilisateur

Comnet

Comnet CWFE2COAX Manuel du propriétaire

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité