Comdial DX-80 Manuel utilisateur
DX-80™
Analog
Station
User’s Guide
P7291 AEUG 11/02-2 1
DX-80™ Analog Station User’s Guide
Outgoing Call (CO Line) 9
Dial CO Line code (other codes may be applicable)
Listen for CO Line dial tone; then dial the telephone number.
Intercom Call with Auto Selection Active 101-156
Go Off-hook (CO dial tone heard)
Hook flash (listen for intercom dial tone
Dial the extension
Intercom Call with Auto Selection Not Active 101-156
Listen for dial tone and dial the extension number
Call Brokering (handling two calls) {Flash} + 2
While connected on a call, press {FLASH} (hookswitch flash).
Dial CO line code, wait for dial tone, and dial second numbers.
To switch back to the first call, press {FLASH} then dial 2
To disconnect the current call, press {FLASH} then dial 1
Account Code 79
Dial 79+valid account code, wait for dial tone.
Call Operator/Attendant 0
Dial 0
Conference (3 party max) {FLASH} + 3
While on a call-press {FLASH} (hookflash).
Make a second call.
Press {FLASH}, then dial 3
Conference, Meet Me (4 party max) 390-397
Operation-Transfer a caller to a Meet Me Conference
—While connected to another extension or CO line, momentarily press the
hookswitch (or press the FLASH) button.
—Wait for dial tone, then dial the Meet Me Conference (390-397)
—Hang up to complete the transfer
Operation-Join a Meet Me Conference
—Dial the Meet Me Conference destination to join (390-397)
Last Number Redial #8
Dial #8
Making a Call: Analog Ports (Single Line Telephones)
2 P7291 AEUG 11/02-2
Paging 400, 401-408, or 777
Dial the Page access code 400, 401-408, or 777
Speed Dial Extension 470-489
System 500-699
Setup
Dial #1 + speed # bin (470-489) + number to dial
Press FLASH (hookswitch flash).
Operation-Use
Dial the Speed Dial bin (470-489 or 500-699)
Alarm - Extension #92
Operation - Activate
Dial #92 + hhmm (24hr format), + 1 for once, or 2 for repeated daily.
Operation - Cancel
Dial #*92
Automatic Selection/Prime Line
Setting Auto Selection To a Specific Line
Go Off-Hook
Dial #951 + Line Group Directory Number (9, or 800-806)
Confirmation Tone Heard
Go On-Hook
Setting Auto Selection For a Specific Line Group
Dial #951 + Line Group Directory Number (9, or 800-806)
Confirmation Tone Heard
Go On-Hook
Cancelling Auto Selection
Go Off-Hook
Hook Flash (receive intercom dial tone)
Dial #950 (confirmation tone heard)
Go On-Hook
Setup: Analog Ports
P7291 AEUG 11/02-2 3
Call Forward - Extension #2
Operation - Activate
Call Forward may be activated for the following types of calls
1=CO calls only, 2=CO and Intercom calls, or
3= Intercom calls only
Immediate Forward: Dial #22 + ext number+type of call to forward
Forward on Busy: Dial #21 + ext number+type of call to forward
Forward on No Answer: Dial #24 + ext number+type of call to forward
(1,2, or 3) + T1+T2. T1and T2 are time settings. T1is the amount of time
(in seconds), that the first call to your extension following inactivity, will
ring before forwarding. T2is the amount of time (in seconds) that subse-
quent calls will ring before forwarding.
Follow Me Forward: From the new location, dial #23 + Your ext # + type
of call to forward (1, 2, or 3) +your extension password.
Follow To Forward: From your extension, dial #25 + ext # + type of call to
forward (1, 2, or 3).
Operation - Cancel Forward
Cancel Immediate Forward: dial #*22
Cancel Busy Forward: dial #*21
Cancel No Answer Forward: dial #*24
Cancel Follow Me Forward: dial #*23
Cancel Follow To Forward: dial #*25
Do Not Disturb #4
Dial #4. Repeat to clear
Extension Password #97
Dial #97 + old password (default=0000) + new password
Hotline #9*
Operation - Setup
Dial #9* + ext # or speed bin # + 0-9 (delay time). Whenever the telephone
is taken off-hook, this destination is called.
Operation - Cancel
Lift the handset, momentarily press the hookswitch (FLASH), then dial #*9*
Phone Lock/Unlock #97
Dial #97 + extension password + # for lock or * for unlock.
Reset DND and Call Forward #69
Dial #69. DND and Call Forward modes are cancelled.
4 P7291 AEUG 11/02-2
Call Back - CO Line/Extension #
When you try to access an outside line or extension and get a busy tone, dial
#
Call Park Answer #73
Dial #73 + extension number where call is parked
Call Pickup 6, *, or 440 -447
Extension (Direct) Call Pickup:
Dial ringing extension number + 6
Group Call Pickup:
Dial *
or....
dial the group number of the ringing extension (440-447).
Camp On-Extension 4
When you call a busy extension, dial 4, and wait for them to answer.
Flash - CO Line #3
While connected to a CO line, momentarily press the hook switch (FLASH),
then dial #3.
Forced Intercom Tone Ring *
When you call an extension that is in Voice Announce mode and wish to
tone ring that extension, dial *.
In Progress Features: Analog Ports
P7291 AEUG 11/02-2 5
Hold {FLASH}
Place a call on hold:
While on a call, press {FLASH} (hookswitch flash).
Hang up. The line is placed on System (Common) hold.
Retrieve a call on hold:
Press {FLASH} (hookswitch flash).
Intrusion - Extension/CO Line 8
When you dial an extension that is busy, dial 8.
Meet Me Page # or #59
While a page is currently in progress, dial # or #59.
Messaging - Call Me #96
Set:
When you have called an extension and wish to leave a message, press #96.
Cancel:
Dial #*96, then the extension number where your message was previously
left.
Monitor - Extension/CO Line {Privacy Alert}
When you dial an extension that is busy, dial 1. (Reference applicable laws
when using this feature.)
OHVA - Extension
When you call a busy extension, dial 0 and talk over their speaker.
Pulse to DTMF Conversion
After a dial pulse (rotary dial) call is made on a CO line, press *. Any digits
dialed following the * will be sent in DTMF (tone) mode.
Tone Ring Forced
When a digital speakerphone in Voice Announce mode is called, you can
change the alert to tone by pressing *.
Transfer
While connected on a call (CO line or intercom extension), press {FLASH}
(hookflash).
Listen for dial tone, then dial the destination where this call is to be trans-
ferred (extension, UCD Group, Virtual Number, etc.) To screen the transfer,
wait for the called extension to answer.
Hang up to complete the transfer.
6 P7291 AEUG 11/02-2
Notes:
P7291 AEUG 11/02-2 DX-80 Analog Station User’s Guide
Autres manuels pour DX-80
8
Table des matières
Autres manuels Comdial Téléphone
Comdial
Comdial MP5000 Manuel utilisateur
Comdial
Comdial DSU II Series Manuel utilisateur
Comdial
Comdial Impression 2022S series Manuel utilisateur
Comdial
Comdial Executech 2232 Manuel utilisateur
Comdial
Comdial DSU Series Manuel utilisateur
Comdial
Comdial Digital Communications Systems Manuel utilisateur
Comdial
Comdial Large Screen Display Speakerphone Manuel utilisateur
Comdial
Comdial Impact SCS 8212S Series Manuel utilisateur
Comdial
Comdial DXP Impact Manuel utilisateur
Comdial
Comdial LCD Speakerphone Manuel utilisateur
Comdial
Comdial Quick Q Manuel utilisateur
Comdial
Comdial Impact 8012S Series Manuel utilisateur
Comdial
Comdial DigiTech 7700S Series Manuel utilisateur
Comdial
Comdial DSU and DSU II Manuel utilisateur
Comdial
Comdial Quick Q Manuel utilisateur
Comdial
Comdial SCS 8324SJ-FB Manuel utilisateur
Comdial
Comdial Solo II 5531S Manuel utilisateur
Comdial
Comdial Air Imact Manuel utilisateur
Comdial
Comdial Conversip EPI00G-L12 Manuel utilisateur
Comdial
Comdial DXP Series Manuel utilisateur
