5
ENGLISH
4) Use and maintenance of the power tool
a) Do not force thepowertool. Usethecorrect power tool for your application.
Thecorrect power tool will perform thetask better and safer if used at thecorrect
feedrate.
b) Never use thepower tool if thepower switch does not switch thetool on and
off properly. Allpower tools that cannot be controlled by thepower switch are
dangerous and must be repaired.
c) Unplug thelead from thewall socket or remove thebattery before
making any adjustments, changing accessories or storing thepowertool.
Theseprecautions reduce therisk of thepower tool starting unexpectedly.
d) Store power tools that are not being used out of children’sreach. Donot
allow people who are unfamiliar with thetool or these instructions to
operate thetool. Powertools can be dangerous if they fall into thehands of
inexperiencedusers.
e) Maintain powertools. Checkfor any incorrect settings, parts that
catch, broken parts or anything else which may cause thepower tool
to malfunction. Ifsomething is damaged it must be repaired beforeuse.
Accidents are frequently caused by poorly maintained powertools.
f) Keep cutting tools sharp andclean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use thepower tool, and any accessories in accordance with these
instructions, taking into account theworking conditions and thework to
be performed. Using thepower tool for apurpose other than that for which it is
intended could result in adangerous situation.
5) Service
a) Repairs and service should only be performed by qualified tradesmen, and
only with original spareparts. Thisguarantees that thesafety of thepower tool is
maintained.
Safety instructions specific to spray guns
• Thespray gun must not be used in close proximity to sources of ignition such as
open fires, smokers, sparks, filaments, hot surfaces,etc.
• Only use paints or other coating materials with aflashpoint above 21ºC.
• Be aware of potential hazards caused by thecoating material. Follow
theinstructions on thepackaging of thecoating material, especially those related
to personal protection equipment.
• Use thespray gun in awell-ventilated room suited for thepurpose.
• Warning: Neveruse thespray gun with any flammable liquid.
• If themains lead is damaged it should only be replaced by themanufacturer or
aqualified service technician. Thisis to avoid hazards.
