Classique CLO69XLS Manuel utilisateur
User manual for your Classique
600mm Built-in Oven
CLO69XLS
NOTE: This user manual contains important information including safety & installation
points which will enable you to get the most out of your Classique appliance. Please
keep it in a safe place so that it is readily available for future reference.
Contents
Important safety information 1
Environmental note 3
Installation 4
Using the appliance
Description of the appliance 7
Before first use 9
Setting the clock 10
Selecting an oven function and temperature 11
Using the timer 14
Cleaning and maintenance 19
Troubleshooting 22
Cooking guidelines 24
Technical information 27
1
Important safety information
Your safety is of the utmost importance. Please make sure that you read this
instruction booklet before attempting to install or use the appliance. If you are
unsure of any of the information contained in this booklet, please contact the
retailer where you purchased your appliance from.
General Information
This appliance is designed for domestic household use and can be built into a standard
kitchen cabinet or housing unit.
The adjacent furniture or housing and all materials used in the installation must be able to
withstand a minimum temperature of 85°C above the ambient temperature of the room it
is located in, whilst in use.
Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage
or discoloration at temperatures below the guidelines given above.
Any damage caused by the appliance being installed in contravention of this temperature
limit, or by placing adjacent cabinet materials closer than 4mm to the appliance, will be
the liability of the owner.
For use in leisure accommodation vehicles, please refer to the appropriate information
given in the installation instructions for this appliance.
The use of this appliance for any other purpose or in any other environment without the
express agreement of our company will invalidate any warranty or liability claim.
Repairs may only be carried out by an authorised service agent, log onto
www.classique.co.nz to locate an agent near you.
This appliance complies with all current safety legislation. We do wish to emphasise that
this compliance does not remove the fact that the appliance surfaces will become hot
during use and retain heat after operation.
Child Safety
Classique strongly recommend that babies and young children are prevented from
being near to the appliance and not allowed to touch the appliance at any time.
If it is necessary for younger family members to be in the kitchen, please ensure that
they are kept under close supervision at all times.
2
General Safety
Do not place heavy objects on the oven door or lean on the oven door when it is open,
as this can cause damage to the oven door hinges.
Do not leave heated oil or fat unattended, as this is a fire risk.
Do not place pans or baking trays directly on the base of the oven cavity, or line it with
aluminium foil.
Do not allow electrical fittings or cables to come into contact with areas on the
appliance that get hot.
Do not use the appliance to heat the room it is located in or to dry clothing.
Do not install the appliance next to curtains or soft furnishings.
Do not attempt to lift or move cooking appliances by using the oven door or handle, as
this may cause damage to the appliance or result in injury to the person lifting the
appliance.
Cleaning
Cleaning of the oven should be carried out on a regular basis.
Great care should be taken whilst using this appliance and when following the cleaning
procedure outlined in this user manual. IMPORTANT: The appliance must be
disconnected from the mains before following the cleaning procedure.
Installation
This appliance must be correctly installed by a suitably qualified person,
strictly in accordance with the manufacturer’s instructions.
The manufacturer declines any responsibility for injury or damage, to person or
property, as a result of improper use or installation of this appliance.
Heat, steam and moisture will be created during use of the appliance, take care to avoid
injury and ensure that the room is adequately ventilated. If the appliance is going to be
used for prolonged periods of time, then additional ventilation may be required.
Please consult with your qualified installer if you are in any doubt about the amount of
ventilation that you will require.
3
Environmental note
Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut
off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse.
This should be undertaken by a competent person.
This appliance is marked according to the European directive 2002/96/EC on Waste electrical
and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product/
The symbol on the product or on the documents accompanying the product indicates that this
appliance may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste
disposal. For more detailed information about treatment, recovery and recycling of this product,
please contact your local city office or local waste management office.
The packaging materials that we use are environmentally friendly and can be recycled. Please
discard all packaging material with due regard for the environment.
4
Installation
Electrical connection
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance should be wired into a 16 A double pole switched fused spur outlet, having
3 mm contact separation and placed in an easily accessible position adjacent to the
appliance. The spur outlet must still be accessible even when your oven is located in its
housing to enable the appliance to be disconnected from the mains supply.
To connect the oven power cord, loosen and remove the cover on the terminal block, in
order to gain access to the contacts inside. Make the connection, securing the cord in
place with the cable clamp provided and then immediately close the terminal block cover
again.
If you have to change the oven power cord, the earthing (yellow/green) conductor must
always be 10 mm longer than the line conductors.
Care must be taken to ensure that the temperature of the mains supply cable does not
exceed 50°C.
If the mains supply cable is damaged, then it must be replaced by an appropriate
replacement which can be obtained from Spares Department.
5
Installing the oven into the kitchen cabinet
The kitchen area should be dry and aired and equipped with efficient ventilation.
When installing the oven, easy access to all control elements should be
ensured.
Positioning the appliance
Ensure that the aperture that you will be fitting the oven into is of the size given
in the above diagram.
The oven must be fitted into an oven housing with the ventilation cut-outs
shown in the “Ventilation requirements” section on the next page.
Ensure that the rear panel of the furniture housing unit has been removed.
Ensure that the oven has been securely fixed into the housing unit. The fixing of
the oven into the housing is made by using four screws. These should be
screwed through the oven cabinet and into the housing unit.
6
Ventilation requirements
(Figure shows the ventilation and cut-out requirements for the installation of the
appliance into a standard kitchen unit).
(Figure shows the ventilation and cut-out requirements for the installation of the
appliance into a tall housing unit).
Ensure that the oven has been securely fixed into the
housing unit. The fixing of the oven into the
housing is made by using four screws. These
should be screwed through the oven cabinet
and into the housing unit.
A
A
A
A
7
Description of the appliance
Control panel
Side rack lamp
Wire rack
Oven door
Door handle
Description
Illustration
Qty.
Oven unit
1
Side rack
1 pair
Roasting dish
1
Oven rack
2
Wire insert for
roasting dish
1
Pizza stone
1
Telescopic runner
1 pair
Screw and nut
4
M
A
U
T
O
8
Control panel
1) Oven function selector knob
2) Power indicator light (The light will be on, when a function is selected.)
3) Oven programmer/timer
4) Oven heating indicator light (The light will be on, when the oven is heating.)
5) Thermostat control knob
6) LED display
Oven programmer/timer display
7) “AUTO”: Automatic function symbol
8) : oven heating symbol
9) “﹒”: Time adjustment symbol
10) ：Minute minder symbol
11) “+”: Plus button
12) “M”：Manual button
13) “-“: Minus button
14) “00﹒00” : time display
(The first two digits refer to hour.
The last two digits refer to minute)
50
100
150
200
250
M
A
U
T
O
1 2 34 5
6
0
Table des matières
Autres manuels Classique Four
