Clarke CRSF2 Manuel utilisateur

ROLLER STAND

MODEL No: CRSF2

Part No: 6500962

ASSEMBLY

INSTRUCTIONS

11/08

2

INTRODUCTION

Thank you for purchasing this Clarke roller stand.

Before using the roller stand, please read this instruction manual thoroughly

and carefully follow all directions given. This is for your own safety and for

that of others around you, and will also help you achieve long and trouble

free service from your roller stand.

GUARANTEE

• This product is guaranteed against faulty manufacture for a period

of 12 months. Please keep your receipt as proof of purchase.

• This guarantee is invalid if the product is found to have been

abused or tampered with in any way, or not used for the purpose

for which it was intended.

• Faulty goods should be returned to their place of purchase, no

product can be returned to us without prior permission.

• This guarantee does not effect your statutory rights.

ASSEMBLY

1. Remove the roller stand from the box.

2. Open the legs of the stand as shown

on the right.

• The legs must be fully opened

before the roller stand is used

3

ADJUSTMENTS

ADJUSTING THE HEIGHT

1. Rotate the handle anticlockwise until

it is loose.

2. Lift the roller head to the desired

height.

• Minimum height is 680 mm

• Maximum height is 1080 mm

3. Rotate the handle clockwise to lock

the roller into position.

MAXIMUM WEIGHT CAPACITY

The weight capacity of this unit varies according to the height of the roller.

• Height is set to minimum Maximum load = 90 kg

• Height is set to mid way Maximum load = 60 kg

• Height is set to maximum Maximum load = 45 kg

USING THE ROLLER STAND

When feeding the workpiece over the

roller stand, always feed it from the rear

of the stand as shown on the right, this

will increase the stability of the stand.

Handle

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Clarke Support et étagère

Clarke

Clarke CT100PR Manuel utilisateur

Clarke

Clarke CWR45 Manuel de programmation

Clarke

Clarke STRONG-ARM CAX3TPB Manuel utilisateur

Clarke

Clarke CDS3 Manuel utilisateur

Clarke

Clarke CTS4000B Manuel utilisateur

Clarke

Clarke CWR1 Manuel utilisateur

Clarke

Clarke CHT399 Mode d’emploi

Clarke

Clarke CARS1 Mode d’emploi

Clarke

Clarke CUTS1 Manuel utilisateur

Clarke

Clarke CES560 Manuel utilisateur

Clarke

Clarke CAX6TBC Manuel utilisateur

Clarke

Clarke CAX20S Manuel utilisateur

Clarke

Clarke Strong-Arm CES680 Manuel du propriétaire

Clarke

Clarke Strong-Arm CES340 Manuel utilisateur

Clarke

Clarke CWR45B Manuel de programmation

Clarke

Clarke CTA150 Manuel utilisateur

Clarke

Clarke LB7S Mode d’emploi

Clarke

Clarke Metalworker CL430 Manuel utilisateur

Clarke

Clarke CAX3TA Manuel utilisateur

Clarke

Clarke MCD1 Mode d’emploi

Clarke

Clarke CMS1 Manuel utilisateur

Clarke

Clarke CMSS Manuel utilisateur

Clarke

Clarke CGR1 Manuel utilisateur

Clarke

Clarke Strong-Arm CES450 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur