Cisco SPA525 Mode d’emploi

491 Lisbon Street, Lewiston, ME 04240 800-520-9911 www.oxfordnetworks.com of 41

Installing Your Cisco SPA525 PHONE

Installing Your Cisco SPA5XX PHONE

You will be provided the following in your package to be used to install your new phone(s).

1. The phone base

2. Phone hand set and hand set cord

3. Phone stand

4. Two Ethernet cables. (blue) (red)

491 Lisbon Street, Lewiston, ME 04240 800-520-9911 www.oxfordnetworks.com of 42

Installing Your Cisco SPA525 PHONE

5. Power adapter (if no power over Ethernet switch is being used).

Flip your phone base (1) over and you will see the below ports. Follow the instructions for each

port to get your phone up and running.

491 Lisbon Street, Lewiston, ME 04240 800-520-9911 www.oxfordnetworks.com of 43

Installing Your Cisco SPA525 PHONE

Checking Network Settings

If you have connected the RJ 45 cable from your router to the SW Port on the phone, your phone should

function for inbound and outbound calls. The buttons for each functional line should be green in color.

Orange/amber indicates that the line is not registered. If so, you may have to change your phone from

using a static IP address to use DHCP. You may do so, by following these steps:

Press the menu button

Use arrow key to scroll down

to Network Configuration

Once in network configuration,

check the connection type. Use

right arrow key(same as in step

3) to change from Static IP to

DHCP, press the set button once

you have desired setting.

491 Lisbon Street, Lewiston, ME 04240 800-520-9911 www.oxfordnetworks.com of 44

Installing Your Cisco SPA525 PHONE

4. Once DHCP is set. Phone should refresh/re-initialize and phone should come up (lines should be

green).

5. You can confirm that the phone has a DHCP IP address by going back into the menu (button from step

1). Using arrow key to scroll down to and select “Status”. Scroll to and select “Network Status”. You

should see Addressing Type as DHCP, and you should see an IP address listed as well (Typically a series

of number beginning with 192.168.

To exit to main screen, simply press the back button, and then exit.

Another issue you may experience is the mute button showing as red. This indicates that the phone is

not connected to your network.

Please verify data cable from the SW port on the phone is connected to the router. You can also verify

that the phone has an IP address by following Step 5 above. If you are still unable to connect phone at

this point, please call the Bay Ring Repair Department -Toll Free 1-(855) 229-7464 (1-855 BAYRING) or

(603) 766-1000.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cisco Téléphone

Cisco

Cisco 8875 Manuel de l'opérateur

Cisco

Cisco VOICEMAXX CE 8851 Guide de l'utilisateur

Cisco

Cisco 7965 Manuel utilisateur

Cisco

Cisco 9900 Series Manuel utilisateur

Cisco

Cisco 7945 Series Manuel utilisateur

Cisco

Cisco 500 Series Manuel utilisateur

Cisco

Cisco 7821 Manuel utilisateur

Cisco

Cisco SPA502 Manuel utilisateur

Cisco

Cisco UNIFIED 9971 Manuel utilisateur

Cisco

Cisco VOICEMAXX CE 8811 Guide de l'utilisateur

Cisco

Cisco Cisco 7940 Manuel utilisateur

Cisco

Cisco 7841 Manuel utilisateur

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Guide de sécurité

Cisco

Cisco SPA 508G Manuel utilisateur

Cisco

Cisco Quick Set C20 Manuel de service

Cisco

Cisco Unified 6921 Manuel utilisateur

Cisco

Cisco CP-8865 Manuel utilisateur

Cisco

Cisco Wave Business Manuel utilisateur

Cisco

Cisco Unified 6921 Manuel utilisateur

Cisco

Cisco ATA186-I1 Manuel de l'opérateur

Cisco

Cisco Small Business Pro SPA 502G Manuel utilisateur

Cisco

Cisco 3951 Manuel utilisateur

Cisco

Cisco CP-3911 - Unified SIP Phone 3911 VoIP Mode d’emploi

Cisco

Cisco VoIP 7945 Manuel utilisateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur