Cisco SRW2008MP Guide de démarrage rapide

Table des matières

Autres manuels Cisco Changer

Cisco

Cisco 2960-48TC - Catalyst Switch Manuel utilisateur

Cisco

Cisco CSS 11801 Manuel utilisateur

Cisco

Cisco Sx350 Mode d’emploi

Cisco

Cisco Catalyst 2960 Series Manuel utilisateur

Cisco

Cisco Nexus 7000 Series Manuel utilisateur

Cisco

Cisco Aironet 350 Series Manuel utilisateur

Cisco

Cisco Catalyst 4500 Series Manuel utilisateur

Cisco

Cisco SG300-52P-K9-NA Manuel utilisateur

Cisco

Cisco WS-C3560E-24PD-E Manuel d'installation

Cisco

Cisco 2950 - Catalyst Switch Manuel d'installation

Cisco

Cisco Catalyst Blade Switch 3130 Manuel utilisateur

Cisco

Cisco Nexus 5000 Series Manuel utilisateur

Cisco

Cisco BPX-BXM-T3-12 Manuel utilisateur

Cisco

Cisco WS-C3560X-48PF-L Manuel

Cisco

Cisco ME-C3750-24TE-M Manuel

Cisco

Cisco M5 Manuel

Cisco

Cisco IE 4000 Manuel utilisateur

Cisco

Cisco Catalyst 3850 Manuel utilisateur

Cisco

Cisco Catalyst Blade Switch 3130 Manuel

Cisco

Cisco 3750 - Catalyst EMI Switch Manuel d'installation

Cisco

Cisco Topspin 360 Manuel utilisateur

Cisco

Cisco ME 3400E Manuel utilisateur

Cisco

Cisco Nexus 7706 Manuel

Cisco

Cisco Nexus 9348GC-FXP NX-OS Manuel

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

SRW2008MP Firmware Upgrade FAQ

Document ID: 109169

Questions

Introduction

How do I upgrade the firmware on the SRW2008MP?

Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business

products (formerly Linksys Business Series).

Refer to Cisco Technical Tips Conventions for information on document conventions.

Q. How do I upgrade the firmware on the SRW2008MP?

A. Complete the appropriate procedure in this section in order to upgrade the firmware on the

SRW2008MP.

Firmware Download

Download new firmware from the Cisco Software Center.

Note: Cisco recommends that you perform all firmware upgrades on your local network.

Firmware Upgrade via Web UI

Enter the IP address for your switch in a browser. For example, if your switch uses

the default IP address, enter http://192.168.1.254 in your browser in order to access

the switch.

1.

On the login screen, enter admin in the User Name field and leave the password

blank.

2.

Go to Admin > Firmware Upgrade.3. Click the via HTTP radio button.4.

Click Browse in order to locate the firmware file.5.

Click Proceed.6.

Note: Do not reset or unplug the power while the firmware upgrade is in progress.

Firmware Upgrade Via TFTP Upgrade

Note: TFTP server software is required for this procedures.

Enter the IP address for your switch in a browser. For example, if your switch uses

the default IP address, enter http://192.168.1.254 in your browser in order to access

the switch.

1.

On the login screen, enter admin in the User Name and Password fields.2. Once logged in, go to Admin > Firmware Upgrade.3. Click via TFTP, and then click the Upgrade radio button4.

Choose Software Image from the File Type drop−down list.5. In the TFTP server field, enter the IP address of the computer that runs the TFTP

software.

6.

In the Destination File field, enter the file name for the firmware file.7. Click Proceed.

Note: Do not reset or unplug the power while the firmware upgrade is in progress.

8.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

© 2008 − 2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of

Cisco Systems, Inc.

Updated: Dec 12, 2008 Document ID: 109169