Cisco C460 M4 Manuel utilisateur

Contents

Introduction

Problem

Potentially Impacted Systems:

Customer Visibility / Impact:

Solution

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Work Around 2 - Resetting to Factory Defaults via IMC CLI

Introduction

The intent of this document is to address the issue seen regarding Trusted Platform Module (TPM)

related System Event Logs (SEL) events on some C460 M4 servers. A small number of C460 M4

SPARE servers will see a critical SEL event related to TPM presence right out of the factory. The

instructions below will assist you in resolving servers impacted by this issue.

Problem

Potentially Impacted Systems:

About 614 SPARE C460 M4 Systems (Shipped between June 2nd 2014, and April 13th 2016.)

Customer Visibility / Impact:

Customers may see a critical SEL event similar to the one below on servers received from the

factory.

There is NO operational impact to the server, but the message may lead to unessary concern

resulting in a call to TAC. This has to do with the way TPMs were handeled in manufacturing.

C460 M4 systems keep a "Cached" value for TPM presence, indicating if a TPM was was ever

installed in the server - every server has a TPM installed durring testing. The C460 M4 also tracks

the current precense of the TPM, and since all servers ordered as spares ship without a TPM, the

system triggers an alarm thinking that the module that was once installed has been removed.

Solution

The work-arround below will allow you to quickly address this SEL event should you wish to

remove the messages. The work-arround involves resetting the Integrated Management Controller

(IMC) to factory default settings, clearing any cached TPM Presence value.

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Resting to Factory Defaults via IMC WebUI

Point a browser to the IMC IP, login, and navigate to the Admin --> Utilities tab1. Click the "Reset Cisco IMC to Factory Default Configuration" as shown in the image below.2.

3. You will be prompted with a pop up box. Click OK to proceed.

Note: The IMC will reset completely and you will need to reconfigure all settings. Please record

any information prior to the reset.

Work Around 2 - Resetting to Factory Defaults via IMC CLI

SSH to the IMC IP using the user's credentials.1. Type the following commands as shown below:2.

a. scope cimc

b. factory-default

3. Enter "y" to continue.

Note: The IMC will reset completely and you will need to reconfigure all settings.

Please record any information prior to the reset.

Table des matières

Autres manuels Cisco Serveur

Cisco

Cisco UCS E Series Manuel utilisateur

Cisco

Cisco CRS-16 DC Mode d’emploi

Cisco

Cisco Meraki MX65 Manuel utilisateur

Cisco

Cisco UCS B22 M3 Manuel utilisateur

Cisco

Cisco UCS X9508 Guide de démarrage rapide

Cisco

Cisco UCS C22 M3 Manuel du système

Cisco

Cisco UCS C22 Instructions d'installation et d'entretien

Cisco

Cisco ONS 15600 Manuel utilisateur

Cisco

Cisco TelePresence Manuel utilisateur

Cisco

Cisco TelePresence Server 7010 Fiche technique

Cisco

Cisco UCS C Series Mode d’emploi

Cisco

Cisco ONS 15454 Manuel

Cisco

Cisco APP1000 - One Application Server Appliance Mode d’emploi

Cisco

Cisco S195 Manuel utilisateur

Cisco

Cisco TelePresence Video Communication Server Manuel de service

Cisco

Cisco Sourcefire Defense Center 750 Manuel utilisateur

Cisco

Cisco UCS E Series Manuel utilisateur

Cisco

Cisco UCS B250 M1 Manuel

Cisco

Cisco UCS B420 M3 Manuel utilisateur

Cisco

Cisco UCS X210c M6 Manuel

Cisco

Cisco UCS C22 M3 Manuel utilisateur

Cisco

Cisco TelePresenceMCU 5300 Series Manuel utilisateur

Cisco

Cisco UCS 5100 Guide rapide

Cisco

Cisco Firepower Management Center 750 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur