Cisco 3630 Manuel utilisateur
CHAPTER
1-1
Cisco Video Surveillance 3630 and 6630 IP Camera Installation Guide
1
Overview
This chapter describes the Cisco Video Surveillance 3630 and 6630 IP Camera, and includes the
following topics:
•Introduction, page 1-1
•Package Contents, page 1-1
•IP Camera Physical Details, page 1-2
Introduction
The Video Surveillance 3630 and 6630 IP Cameras are high-definition, versatile video endpoints that are
designed for outdoor use and capable of providing situational information beyond basic video streaming.
Video from the camera can be streamed at 1.3MP resolution at up to 30 fps (3630) or 1080presolution
at up to 30 fps (6630). With a dynamic range, a clear picture can be captured in scenes containing harsh
contrast in lighting. Onboard audio capabilities also allow for two way communications and monitoring
and alarming on audio triggers. The cameras are equipped with a motorized focus and zoom lens for easy
setup and deployment. Additionally, these cameras can run applications, making them a versatile and
ideal platform to add specific functionality for customized deployments.
Package Contents
The Cisco Video Surveillance IP Camera package includes the following items:
•Outdoor Camera (1)
•Installation template/alignment sticker (1)
•Mounting plate (1)
•Waterproof connector (1)
•Allen wrench (1)
•Screws, M4 x 25 for securing the mounting plate to a ceiling or wall (4)
•Wall plugs (4)
•Double-sided tape (1)
•Waterproof connector (1)
•Silica gel pack (1)
1-2
Cisco Video Surveillance 3630 and 6630 IP Camera Installation Guide
Chapter 1 Overview
IP Camera Physical Details
•Black cover (1)
•Cisco pointer document (1)
•Cisco RoHs document (1)
•Extra set of labels (3)
•RJ45 cable with preinstalled connector (1)
IP Camera Physical Details
Figure 1-1 and the table that follows describe the physical features of the 3630 and 6630 IP camera.
Figure 1-1 IP Camera Physical Features
1-3
Cisco Video Surveillance 3630 and 6630 IP Camera Installation Guide
Chapter 1 Overview
IP Camera Physical Details
1Varifocal lens IP camera lens that changes focus as the focal length changes.
2IR LEDs Provide infrared illumination when the IP camera is in night
mode.
3Tilt adjustment screw Used when tilting the camera to set the field of view.
4Focus button After using the Tele and Wide buttons to set the zoom, press to
automatically adjust the focus of the IP camera.
5Tele (zoom in) button Press to zoom in the IP camera.
6Wide (zoom out) button Press to zoom out the IP camera.
7Light sensor Senses the level of ambient light to determine when to switch
day/night mode.
8MicroSD card slot Supports a MicroSD memory card for video storage.
9Recessed Reset button Recessed button that reboots the IP camera or resets it to a
default state. You can use a pin or paper clip to depress it. It can
be used any time that the IP camera is on and can have various
effects, as described in the “Resetting the IP Camera” section
on page 4-4.
10 Video output switches. The left switch is reserved for future use.
The right switch allows setting these options for the video
output:
•NTSC (switch up)—Switches camera operation to the
National Television System Committee (NTSC) 60 Hz
standard.
•PAL (switch down)—Switches camera operation to the
Phase Alternating Line (PAL) 50 Hz standard.
11 Audio/Video out (green) Allows the connection of an optional Y cable or mini cable with
BNC connector. You can connect a video monitor to the mini
cable with BNC connector. Both cables are included in the
optional audio/video cables accessory kit can be purchased
from Cisco (Cisco part number CIVS-AVCABLE).
12 Microphone In (pink) Connection for an external microphone.
13 Ethernet 10/100 RJ45 socket Accepts a standard LAN cable to connect the IP camera to a
10/100BaseT router or switch.
14 GPIO Terminal Block General purpose input/output (GPIO) terminal block that is
used to connect external input and output devices. For more
information, see Figure 1-2.
1-4
Cisco Video Surveillance 3630 and 6630 IP Camera Installation Guide
Chapter 1 Overview
General Purpose I/O Terminal Block
General Purpose I/O Terminal Block
Figure 1-2 describes the GPIO terminal block pin locations.
Figure 1-2 GPIO Terminal Block Pin Locations and Descriptions
Pin Description
1 DC 12V–
2 DC 12V+
3AC24V_2
4AC24V_1
5 DI– (GND)
6DI+
1
1. The maximum output load from pins 7 and 8 is 50mA.
7 DO–1
8 DO+ (+12V)
87654321
Ce manuel convient aux modèles suivants
1
Autres manuels Cisco Caméra de sécurité
Cisco
Cisco CIVS-IPC-2911 Manuel utilisateur
Cisco
Cisco Meraki MV13 Series Manuel utilisateur
Cisco
Cisco 6020 Manuel utilisateur
Cisco
Cisco 6020 Instructions d'utilisation et de sécurité
Cisco
Cisco PVC2300 - Small Business Internet Video... Manuel utilisateur
Cisco
Cisco WVC80N Manuel utilisateur
Cisco
Cisco CIVS-IPC-3421V Manuel utilisateur
Cisco
Cisco WVC210 - Small Business Wireless-G PTZ Internet Video... Manuel utilisateur
Cisco
Cisco Meraki MV93 Series Manuel utilisateur
Cisco
Cisco Meraki MV32 Manuel utilisateur
Cisco
Cisco Small Business VC220 Manuel utilisateur
Cisco
Cisco Video Surveillance 3520 Manuel utilisateur
Cisco
Cisco 8620 Manuel utilisateur
Cisco
Cisco Meraki MV12 Manuel utilisateur
Cisco
Cisco CIVS-IPC-5010 Manuel utilisateur
Cisco
Cisco WVC200 - Wireless-G PTZ Internet Camera Manuel utilisateur
Cisco
Cisco Small Business VC220 Mode d’emploi
Cisco
Cisco WVC80N Manuel utilisateur
Cisco
Cisco PVC2300 - Small Business Internet Video... Manuel utilisateur
Cisco
Cisco PTZ Manuel utilisateur
