Cisco 12010 series Manuel utilisateur
Corporate Headquarters:
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 12010, Cisco 12410, and
Cisco 12810 Router Unpacking
Instructions
This document contains instructions for unpacking the Cisco 12010, Cisco 12410,
and Cisco 12810 routers. After you unpack the system, refer to the Cisco 12010,
Cisco 12410, and Cisco 12810 routers Installation and Configuration Guide for
more information.
This document includes the following topics:
•Before Unpacking the Router, page 2
•Tools and Equipment, page 3
•Unpacking the Router, page 3
•Repacking the Router, page 7
•Regulatory, Compliance, and Safety Information, page 8
•Obtaining Documentation, page 8
•Documentation Feedback, page 10
•Obtaining Technical Assistance, page 10
•Obtaining Additional Publications and Information, page 12
Before Unpacking the Router
2
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions 78-16075-02
Before Unpacking the Router
Figure 1 shows the router on a shipping pallet. A fully configured system can
weigh as much as 275 pounds (124.74 kg), not counting the additional weight of
the pallet and packaging materials. Before unpacking the system, you should
carefully plan the site location of the router and the method you will use to move
it into position.
Figure 1 Router on a Shipping Pallet
50835
3
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions
78-16075-02
Tools and Equipment
Tools and Equipment
You need the following items and tools:
•3/16-inch flat-blade screwdriver
•1/4-inch flat-blade screwdriver
•9/16-inch (14-mm) wrench
•10-mm wrench (open-end or socket)
•Wire cutters
•Pliers
Unpacking the Router
This section explains how to unpack the router from the shipping pallet.
Figure 2 shows the main packing material and accessory kit container. The
accessory tray that fits on top of the cushioning contains:
•Front and midtrack-mount brackets and securing hardware
•Blower module frontcover (Original series only. Enhanced series routers ship
with the front door installed.)
•User documentation
•Cables
Note Save the packaging materials in case the router has to be repackaged to be
shipped again. Repackaging instructions are located in the Cisco 12010,
Cisco 12410, and Cisco 12810 routers Installation and Configuration
Guide.
Unpacking the Router
4
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions 78-16075-02
Figure 2 Router Package Components
50834
Front hold
down bracket
Top cushion cap
A
ccessory tray
Outer
tube
Cap
Rear hold
down bracket
5
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions
78-16075-02
Unpacking the Router
Step 1 Cut the straps securing the router to the pallet (see Figure 1).
Step 2 Refer to Figure 2 for the following steps:
a. Remove the top cap.
b. Lift off the outer shipping tube.
c. Remove the accessory tray.
d. Remove the top cushion cap.
Step 3 Remove the bolts securing the two front-side hold-down brackets to the pallet.
Step 4 Remove the bolts securing the rear hold-down bracket to the pallet.
If you are installing an enhanced version of the router, go to Step 5. For all other
models, go to Step 7.
Step 5 Cut the plastic tie-wrapand remove it from the upper left hinge bracket (Figure 3).
Note The plastic tie-wrap secures the front door to the chassis during shipment.
Figure 3 Removing the Tie-Wrap and Label
149690
REMOVE
TIE WRAP
Unpacking the Router
6
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions 78-16075-02
Step 6 Open the front door and remove the labels (labeled REMOVE) that protect the
rubber bumpers during shipment (Figure 4).
Close the front door.
Figure 4 Removing the Rubber Bumper Shipping Label
Step 7 Your Cisco router is ready for installation. For installation instructions, see the
Cisco 12010, Cisco 12410, and Cisco 12810 routers Installation and
Configuration Guide (see Obtaining Documentation, page 8).
REMOVE
1
49691
7
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions
78-16075-02
Repacking the Router
Repacking the Router
This section describes how to repack your Cisco router into the shipping
container. This procedure assumes you have the pallet, packing material, and
hardware you saved when the chassis was unpacked.
Step 1 Place the router on a Cisco 12010 series shipping pallet.
Step 2 Secure the side and rear brackets to the pallet using the bolts and screws you saved
when the chassis was unpacked (see Figure 2).
Step 3 Tighten all of the captive screws on the power entry modules, power distribution
unit, and line cards so that they are secure.
Step 4 Refer to Figure 2 and:
a. Place the top cushion cap on the router.
b. Place the accessory tray on top of the router.
c. Place the cardboard outer tube over the router.
d. Place the top cap on the accessory tray.
Step 5 Secure the cardboard shipping container to the pallet using straps similar to the
ones used to ship the router to you.
Your router is ready for shipment.
Transporting the Router
The shipping package for the router is engineered to reduce the potential of
product damage during shipment. To minimize potential damage to the product,
transport the router in its Cisco specified packaging. Failure to do so may result
in damage to the router or degradation of its performance. Do not remove the
router from its shipping container until you are ready to install it. The router
should always be transported or stored in an upright position. Keep the router in
the shipping container until you have determined an installation site.
Regulatory, Compliance, and Safety Information
8
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions 78-16075-02
Regulatory, Compliance, and Safety Information
The complete list of translated safety warnings and agency approvals is available
in the Regulatory Compliance and Safety Information for Cisco 12000 Series
Internet Routers publication (Document Number 78-4347-xx).
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco
also provides several ways to obtain technical assistance and other technical
resources. These sections explain how to obtain technical information from
Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/techsupport
You can access the Cisco website at this URL:
http://www.cisco.com
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Product Documentation DVD
Cisco documentation and additional literature are available in the Product
Documentation DVD package, which may have shipped with your product. The
Product Documentation DVD is updated regularly and may be more current than
printed documentation.
The Product Documentation DVD is a comprehensive library of technical product
documentation on portable media. The DVD enables you to access multiple
versions of hardware and software installation, configuration, and command
guides for Cisco products and to view technical documentation in HTML. With
9
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions
78-16075-02
Obtaining Documentation
the DVD, you have access to the same documentation that is found on the Cisco
website without being connected to the Internet. Certain products also have .pdf
versions of the documentation available.
The Product Documentation DVD is available as a single unit or as a subscription.
Registered Cisco.com users (Cisco direct customers) can order a Product
Documentation DVD (product number DOC-DOCDVD=) from the Ordering tool
or Cisco Marketplace.
Cisco Ordering tool:
http://www.cisco.com/en/US/partner/ordering/
Cisco Marketplace:
http://www.cisco.com/go/marketplace/
Ordering Documentation
Registered Cisco.com users may order Cisco documentation at the Product
Documentation Store in the Cisco Marketplace at this URL:
http://www.cisco.com/go/marketplace/
Cisco will continue to support documentation orders using the Ordering tool:
•Registered Cisco.com users (Cisco direct customers) can order
documentation from the Ordering tool:
http://www.cisco.com/en/US/partner/ordering/
•Instructions for ordering documentation using the Ordering tool are at
this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
•Nonregistered Cisco.com users can order documentation through a local
account representative by calling Cisco Systems Corporate Headquarters
(California, USA) at 408 526-7208 or, elsewhere in North America, by
calling 1 800 553-NETS (6387).
Documentation Feedback
10
Cisco 12010, Cisco 12410, and Cisco 12810 Router Unpacking Instructions 78-16075-02
Documentation Feedback
You can rate and provide feedback about Cisco technical documents by
completing the online feedback form that appears with the technical documents
on Cisco.com.
You can submit comments by using the response card (if present) behind the front
cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical
assistance. The Cisco Technical Support & Documentation website on Cisco.com
features extensive online support resources. In addition, if you have a valid Cisco
service contract, Cisco Technical Assistance Center (TAC) engineers provide
telephone support. If you do not have a valid Cisco service contract, contact your
reseller.
Cisco Technical Support & Documentation Website
The Cisco Technical Support & Documentation website provides online
documents and tools for troubleshooting and resolving technical issues with Cisco
products and technologies. The website is available 24 hours a day, at this URL:
http://www.cisco.com/techsupport
Access to all tools on the Cisco Technical Support & Documentation website
requires a Cisco.com user ID and password. If you have a valid service contract
but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Autres manuels pour 12010 series
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Cisco Routeur réseau
Cisco
Cisco WS-C6503 Manuel utilisateur
Cisco
Cisco ASR-920-10SZ-PD Mode d’emploi
Cisco
Cisco ASR 903 Manuel
Cisco
Cisco ASR 1000 Series Manuel utilisateur
Cisco
Cisco WRT310N Manuel utilisateur
Cisco
Cisco RV130W Manuel d'installation et d'exploitation
Cisco
Cisco 1861 Series Manuel utilisateur
Cisco
Cisco IE 2000U Series Instructions d'utilisation et de sécurité
Cisco
Cisco 7206 - VXR Router Manuel utilisateur
Cisco
Cisco 2654T6 Manuel utilisateur
Cisco
Cisco 7120 Series Manuel utilisateur
Cisco
Cisco Catalyst 1900 Series Manuel
Cisco
Cisco 6160 Manuel
Cisco
Cisco 10720 Series Manuel de l'opérateur
Cisco
Cisco ASR 914 Manuel utilisateur
Cisco
Cisco WUMC710 Manuel utilisateur
Cisco
Cisco 12000 - Series Chassis Modular Expansion... Manuel utilisateur
Cisco
Cisco ASR 9000 Series Instructions de montage
Cisco
Cisco ASR 900 Series Manuel utilisateur
Cisco
Cisco 805 Series Manuel
