Cisco Nexus 93600CD-GX Manuel

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation

Guide

First Published: 2019-09-27

Last Modified: 2021-02-01

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS REFERENCED IN THIS DOCUMENTATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.

EXCEPT AS MAY OTHERWISE BE AGREED BY CISCO IN WRITING, ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS DOCUMENTATION ARE

PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.

The Cisco End User License Agreement and any supplemental license terms govern your use of any Cisco software, including this product documentation, and are located at:

http://www.cisco.com/go/softwareterms.Cisco product warranty information is available at http://www.cisco.com/go/warranty. US Federal Communications Commission Notices are found

here http://www.cisco.com/c/en/us/products/us-fcc-notice.html.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT

LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS

HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Any products and features described herein as in development or available at a future date remain in varying stages of development and will be offered on a when-and if-available basis. Any

such product or feature roadmaps are subject to change at the sole discretion of Cisco and Cisco will have no liability for delay in the delivery or failure to deliver any products or feature

roadmap items that may be set forth in this document.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network

topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional

and coincidental.

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based

on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language

that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com

go trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any

other company. (1721R)

CONTENTS

Preface vii

PREFACE

Audience vii

Documentation Conventions vii

Documentation Feedback viii

Obtaining Documentation and Submitting a Service Request viii

Overview 1

CHAPTER 1

Overview 1

Preparing the Site 5

CHAPTER 2

Temperature Requirements 5

Humidity Requirements 5

Altitude Requirements 5

Dust and Particulate Requirements 6

Minimizing Electromagnetic and Radio Frequency Interference 6

Shock and Vibration Requirements 7

Grounding Requirements 7

Planning for Power Requirements 7

Airflow Requirements 9

Rack and Cabinet Requirements 9

Clearance Requirements 10

Installing the Chassis 13

CHAPTER 3

Safety 13

Installation Options with Rack-Mount Kits 16

Airflow Considerations 17

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

iii

Installation Guidelines 17

Unpacking and Inspecting the Switch 18

Installing the Switch Using the NXK-ACC-KIT-1RU Rack-Mount Kit 19

Grounding the Chassis 22

Starting the Switch 23

Connecting the Switch to the ACI Fabric 27

CHAPTER 4

ACI Fabric Topology 27

Preparing to Connect to Other Devices 28

Connecting Leaf Switches to APICs 29

Connecting Leaf Switches to Spine Switches 31

Installing a Gigabit Ethernet module (GEM) 32

Migration of Nodes From a First Generation Switch to a Second Generation Switch 32

Setting Up an Optional Console Interface 34

Setting Up an Optional Management Connection 35

Optic Transceiver Removal Using the Optics Extraction Tool 35

Maintaining Transceivers and Optical Cables 37

Replacing Components 39

CHAPTER 5

Replacing a Fan Module During Operations 39

Replacing a Power Supply Module 40

Removing an AC Power Supply 40

Removing an HVAC/HVDC Power Supply 41

Removing a DC Power Supply 41

Installing an AC Power Supply 42

Installing an HVAC/HVDC Power Supply 43

Installing a DC Power Supply 43

Connecting a Power Cable to an NXA-PDC-930W Power Supply 44

Rack Specifications 47

APPENDIX A

Overview of Racks 47

General Requirements for Cabinets and Racks 47

Requirements Specific to Standard Open Racks 48

Requirements Specific to Perforated Cabinets 48

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

Contents

Cable Management Guidelines 49

System Specifications 51

APPENDIX B

Environmental Specifications 51

Switch Dimensions 51

Switch and Module Weights and Quantities 52

Transceiver and Cable Specifications 52

Switch Power Input Requirements 52

Power Specifications 53

1100-W AC Power Supply Specifications 53

1100-W HVAC/HVDC Power Supply Specifications 53

1100-W DC Power Supply Specifications 54

Power Cable Specifications 54

Power Cable Specifications for AC Power Supplies 54

HVAC/HVDC Power Cables Supported by ACI-Mode and NX-OS Mode Switches 56

DC Power Cable Specifications 57

Regulatory Standards Compliance Specifications 57

LEDs 59

APPENDIX C

Switch Chassis LEDs 59

Fan Module LEDs 59

Power Supply LEDs 59

Additional Kits 61

APPENDIX D

Rack Mount Kit NXK-ACC-KIT-1RU 61

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

Contents

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

Contents

Preface

•Audience, on page vii

•Documentation Conventions, on page vii

•Documentation Feedback, on page viii

•Obtaining Documentation and Submitting a Service Request , on page viii

Audience

This publication is for hardware installers and network administrators who install, configure, and maintain

Cisco Nexus switches.

Documentation Conventions

Command descriptions use the following conventions:

DescriptionConvention

Bold text indicates the commands and keywords that you enter literally

as shown.

bold

Italic text indicates arguments for which the user supplies the values.Italic

Square brackets enclose an optional element (keyword or argument).[x]

Square brackets enclosing keywords or arguments separated by a vertical

bar indicate an optional choice.

[x | y]

Braces enclosing keywords or arguments separated by a vertical bar

indicate a required choice.

{x | y}

Nested set of square brackets or braces indicate optional or required

choices within optional or required elements. Braces and a vertical bar

within square brackets indicate a required choice within an optional

element.

[x {y | z}]

Indicates a variable for which you supply values, in context where italics

cannot be used.

variable

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

vii

DescriptionConvention

A nonquoted set of characters. Do not use quotation marks around the

string or the string will include the quotation marks.

string

Examples use the following conventions:

DescriptionConvention

Terminal sessions and information the switch displays are in screen font.screen font

Information you must enter is in boldface screen font.boldface screen font

Arguments for which you supply values are in italic screen font.italic screen font

Nonprinting characters, such as passwords, are in angle brackets.< >

Default responses to system prompts are in square brackets.[ ]

An exclamation point (!) or a pound sign (#) at the beginning of a line

of code indicates a comment line.

!, #

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments

to . We appreciate your feedback.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service

request, and gathering additional information, see What's New in Cisco Product Documentation, at:

https://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.

Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical

documentation as an RSS feed and delivers content directly to your desktop using a reader application. The

RSS feeds are a free service.

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

viii

Preface

Documentation Feedback

CHAPTER 1

Overview

•Overview, on page 1

Overview

The Cisco Nexus 93600CD-GX switch (N9K-C93600CD-GX) is a 1-rack unit (RU), fixed-port switch designed

for spine-leaf-APIC deployment in data centers.

This switch has the following ports:

• 28 10/40/100-Gigabit QSFP28 ports (ports 1-28)

• 8 10/40/100/400-Gigabit QSFP-DD ports (ports 29-36)

• Two management ports (one 10/100/1000BASE-T port and one 1-Gbps SFP port)

• One console port (RS-232)

• 1 USB port

This switch offers QSA 10G support on all ports.

Note

There is no support for 1-Gigabit nor 100-Megabit optics on this switch.

Note

For breakout information, see the Cisco APIC Layer 2 Networking Configuration Guide.

Leaf/Spine role considerations:

• This switch's default role is as a leaf switch.

• The default fabric links (ports 29-36) must be used for initial switch discovery via another switch.

• To change the switch from the default role, the switch must be rebooted (you must select the role of leaf

or spine, except in the case of the default spine switch being connected directly to the APIC).

• A default spine switch that is connected directly to the APIC will be converted to a leaf switch,

automatically.

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

• Port-profile (downlink/fabric link conversion) can be done after it’s registered to the APIC.

Discovery considerations:

• Discovery via APIC – use the default downlink ports.

• Spine discovery – use the default fabric links (ports 29-36) and convert the switch to spine (reboot is

required).

• Leaf discovery via spine – use the default fabric links (ports 29-36).

• Sub leaf discovery via leaf – use the default fabric links (ports 29-36).

• Multipod (Pod 2+) first spine discovery via IPN – Connect the IPN to one of the default fabric links

(ports 29-36). Ensure the spine has at least one leaf node connected to it.

This switch includes the following user-replaceable components:

• Fan modules (six) with the following airflow choices:

• Port-side exhaust fan module with blue coloring (NXA-FAN-35CFM-PE)

• Port-side intake fan module with burgundy coloring (NXA-FAN-35CFM-PI)

This switch runs with +1 redundancy mode, so that if one fan fails, the switch

can sustain operation. But if a 2nd fan fails, this switch is not designed to sustain

operation. Hence before waiting for major threshold temperature to be hit, the

switch will power down due to Powered-down due to fan policy trigger.

Note

Each fan module has two rotors. The switch can function normally if one rotor

inside the any one fan module fails. In case of more than one rotor failure, the

switch will issue a warning and power down in 2 minute.

Note

• Power supply modules (two—One for operations and one for redundancy [1+1]) with the following

choices:

• 1100-W port-side exhaust AC power supply with blue coloring (NXA-PAC-1100W-PE2)

• 1100-W port-side intake AC power supply with burgundy coloring (NXA-PAC-1100W-PI2)

• 1100-W port-side exhaust HVAC/HVDC power supply with blue coloring (NXA-PHV-1100W-PE)

• 1100-W port-side intake HVAC/HVDC power supply with burgundy coloring

(NXA-PHV-1100W-PI)

• 1100-W port-side exhaust DC power supply with blue coloring (NXA-PDC-1100W-PE)

• 1100-W port-side intake DC power supply with burgundy coloring (NXA-PDC-1100W-PI)

Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide

Overview

Autres manuels pour Nexus 93600CD-GX

Table des matières

Autres manuels Cisco Matériel réseau

Cisco

Cisco GS7000 Mode d'emploi

Cisco

Cisco ONS 15454 Mode d’emploi

Cisco

Cisco NSS2000 - Gigabit Storage System Chassis Comment utiliser

Cisco

Cisco NCS 1004 Manuel utilisateur

Cisco

Cisco Gigabit Switch Router Cisco 12012 Manuel utilisateur

Cisco

Cisco Firepower 9300 Manuel

Cisco

Cisco SA-VAM - VPN Acceleration Module Manuel de l'opérateur

Cisco

Cisco VIC-2FXS - 3600 Voice Interface Card-Fxs... Mode d’emploi

Cisco

Cisco AIR-BR1410A-A-K9 - Aironet 1410 Wireless... Manuel utilisateur

Cisco

Cisco ONS 15454 Series Manuel

Cisco

Cisco CVPN3002-K9 - Fast Ethernet VPN Gateway Manuel utilisateur

Cisco

Cisco CMX 3375 Manuel utilisateur

Cisco

Cisco ONS 15310-MA SDH Manuel

Cisco

Cisco AIR-WLC2106-K9 - Wireless LAN Controller... Manuel utilisateur

Cisco

Cisco 3660 Series Manuel utilisateur

Cisco

Cisco 220 Series Smart Plus Manuel utilisateur

Cisco

Cisco MERAKI MR57 Manuel utilisateur

Cisco

Cisco Firepower 2100 Series Manuel utilisateur

Cisco

Cisco S170 Web Manuel utilisateur

Cisco

Cisco 1230AG - Aironet - Wireless Access Point Manuel utilisateur

Cisco

Cisco AIR-BR350-A-K9 - Aironet 350 Wireless Bridge Manuel

Cisco

Cisco CGR 1000 Series Manuel utilisateur

Cisco

Cisco FPR1150-ASA-K9 Manuel

Cisco

Cisco Firepower 2130 Guide de maintenance et de service

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur