Cisco SPA122 ATA Manuel utilisateur

QUICK INSTALL GUIDE

Fax Extension for the Cisco SPA122 ATA

Quick Activation and Installation Guide

Welcome to Fax Extension Service with 8x8 Virtual Oce!

Getting your Fax Extension Service up and running on your Cisco SPA122 Analog Terminal

Adapter takes just a few minutes.

Activating Your Cisco ATA

You will need your activation code to activate your Cisco ATA. The activation code was

sent via email. You can also retrieve it in the 8x8 Account Manager by following these

instructions:

1. Go to www.8x8.com, click Sign In and select Account Manager.

2. Enter your administrator username and password.

3. Click Phone System from the top naviation bar and select View All Extensions.

4. Click Activate Device next to the extension you wish to activate.

5. A pop-up screen displays the activation code for the extension.

6. Connect your ATA to a power source and a router or modem with an Internet connection.

7. Make sure a phone is connected to the Phone 1 plug on the Cisco ATA that you want

to activate.

– If your fax machine has a telephone, lift the handset and follow the voice instructions

to enter the activation code and activate your port

– If your fax machine does not have a built-in telephone, temporarily connect any analog

telephone to activate this port, then plug your fax machine back in for fax service.

8. Follow the instructions on page 2 to install your ATA.

Assistance

If you would prefer to set

up your service over the

phone at no extra charge:

Call 1.866.208.9369 to

schedule an appointment.

QUICK INSTALL GUIDE

Fax Extension for the Cisco SPA122 ATA

NASDAQ: EGHT

www.8x8.com

© 2012. The 8x8, Inc. logo is a registered trademark of 8x8, Inc. 8x8, Inc. is a publicly traded company. PM484/312

The Champion

For Business

Communications

Installing your Cisco SPA122 ATA

• Connect your fax machine to the PHONE 1 port on the back of your Cisco SPA122 ATA.

–If you purchased a 2nd-Port Fax Plan, connect that fax to the PHONE 2 port.

• Disconnect the power adapter on your Cisco ATA and reconnect it after a few seconds.

• You are now ready to place fax calls.

Fax Machine

(2nd-Port Fax Plan Only)

Computer or

Laptop

Internet Connection

(Router or Broadband Modem)

Power AdapterAnalog Phone, Fax

or Paging System

NOTE: If you do not have a router, you can connect your Cisco SPA122 ATA directly into a broadband modem. Please refer to the

Cisco SPA122 ATA Quick Start Guide at http://www.8x8.com/Support/BusinessSupport/Documentation.aspx on how to congure this.

Autres manuels Cisco Modem

Cisco

Cisco DPC3848 Manuel utilisateur

Cisco

Cisco BWX 120 Manuel utilisateur

Cisco

Cisco uBR904 Manuel utilisateur

Cisco

Cisco DPC3208 Manuel utilisateur

Cisco

Cisco EPC3925 Manuel utilisateur

Cisco

Cisco uBR904 Manuel utilisateur

Cisco

Cisco DPC3000 Manuel utilisateur

Cisco

Cisco DPQ2160 Manuel utilisateur

Cisco

Cisco Linksys DPC3008 Manuel utilisateur

Cisco

Cisco uBR904 Mode d’emploi

Cisco

Cisco EPC3212 Manuel utilisateur

Cisco

Cisco DPC3000 Manuel utilisateur

Cisco

Cisco DPX2203 Manuel utilisateur

Cisco

Cisco WebSTAR DPX100 Manuel utilisateur

Cisco

Cisco Cisco 2900 series Manuel utilisateur

Cisco

Cisco 605 Manuel utilisateur

Cisco

Cisco LINKSYS ADSL2MUE Manuel utilisateur

Cisco

Cisco MX450 Manuel utilisateur

Cisco

Cisco 3G MicroCell Manuel utilisateur

Cisco

Cisco DPC3212 Manuel utilisateur

Cisco

Cisco DPC3216 Manuel utilisateur

Cisco

Cisco DPC2202 Manuel utilisateur

Cisco

Cisco EPC3208G EuroDOCSIS 3.0 8x4 Manuel utilisateur

Cisco

Cisco BWX360 WiMAX Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur