Cisco Unified 6921 Mode d’emploi

Cisco Unified IP Phone Settings

•Phone Settings Overview, page 1

•Cisco Unified IP Phone Configuration Menus, page 1

•Network Setup Menu, page 3

•IPv4 Setup Menu Options, page 8

•IPv6 Setup Menu Options, page 13

•Security Setup Menu, page 14

Phone Settings Overview

The Cisco Unified IP Phone includes many configurable network settings that you may need to modify before

the phone is functional for your users. You can access these settings, and change some of them, through menus

on the phone. Settings that are display-only on the phone are configured in Cisco Unified Communications

Manager Administration.

Cisco Unified IP Phone Configuration Menus

The Cisco Unified IP Phone includes the following configuration menus:

•Network Setup: Provides options for viewing and making a variety of network settings.

•IPv4 Configuration: A submenu of the Network Setup menu, the IPv4 menu items provide additional

network options for viewing and setting.

•IPv6 Configuration: A submenu of the Network Setup menu, the IPv6 menu items provide additional

network options for viewing and setting.

Before you can change option settings on the Network Setup menu, you must unlock options for editing.

You can control whether a phone user has access to phone settings by using the Settings Access field in the

Cisco Unified Communications Manager Administration Phone Configuration window.

Related Topics

Password Protection, on page 3

Edit Values, on page 3

Network Setup Menu, on page 3

IPv4 Setup Menu Options, on page 8

IPv6 Setup Menu Options, on page 13

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications

Manager 10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Display Configuration Menu

Password Protection

You can apply a password to the phone so that no changes can be made to the administrative options on the

phone without password entry on the Administrator Settings phone screen.

Apply Phone Password

To apply a password to the phone, perform these steps:

Procedure

Step 1 In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile

Configuration window using Device >Device Settings >Common Phone Profile.

Step 2 Enter a password in the Local Phone Unlock Password option.

Step 3 Apply the password to the common phone profile that the phone uses.

Edit Values

When you edit the value of an option setting, follow these guidelines:

•Use the keys on the keypad to enter numbers and letters.

•To enter letters by using the keypad, use a corresponding number key. Press the key one or more times

to display a particular letter. For example, press 2once for “a,”twice quickly for “b,”and three times

quickly for “c.”After you pause, the cursor automatically advances to allow you to enter the next letter.

•To enter a period (for example, in an IP address), press * on the keypad.

•Press the up arrow on the navigation bar to move the cursor to the left most character, and press the

down arrow on the navigation bar to move the cursor to the right most character.

•Press if you make a mistake. This softkey deletes the character to the left of the cursor.

•Press Cancel before pressing Save to discard any changes that you have made.

The Cisco Unified IP Phone provides several methods you can use to reset or restore option settings, if

necessary. For more information, see the Cisco Unified IP Phone Reset or Restore.

Note

Network Setup Menu

The Network Setup menu provides options for viewing and making a variety of network settings. The following

table describes these options and, where applicable, explains how to change them.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager

10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Password Protection

For information about how to access the Network Setup menu, see the Display Configuration Menu, on page

For information about the keys you can use to edit options, see the Edit Values, on page 3.

Table 1: Network Setup Menu Options

To ChangeDescriptionOption

Scroll to IPv4 Setup and press

Select.

In the IPv4 Setup submenu, you can do the

following:

•Enable or disable the phone to use the

IP address that is assign by the DHCP

server.

•Manually set the IP Address, Subnet

Mask, Default Routers, DNS Server,

and Alternate TFTP servers.

For more information on the IPv4 address

fields, see IPv4 Setup Menu Options, on page

IPv4 Setup

Scroll to IPv6 Setup and press

Select.

In the IPv6 Setup submenu, you can do the

following:

•Enable or disable the phone to use the

IPv6 address that is assign by the

DHCPv6 server.

•Manually set the IPv6 Address, Subnet

Prefix Length, IPv6 DNS Server, and

IPv6 TFTP Servers.

For more information on the IPv6 address

fields, see IPv6 Setup Menu Options, on page

13.

IPv6 Setup

Display only—Cannot configure.

Unique host name that the DHCP server

assigned to the phone.

Host Name

Set Domain Name Field, on page

Name of the Domain Name System (DNS)

domain in which the phone resides.

Domain Name

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications

Manager 10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Network Setup Menu

To ChangeDescriptionOption

Display only—Cannot configure.

The phone obtains its Operational

VLAN ID via Cisco Discovery

Protocol (CDP) from the switch to

which the phone is attached. To

assign a VLAN ID manually, use

the Admin VLAN ID option.

Auxiliary Virtual Local Area Network

(VLAN) configured on a Cisco Catalyst

switch in which the phone is a member.

If the phone has not received an auxiliary

VLAN, this option indicates the

Administrative VLAN.

If neither the auxiliary VLAN nor the

Administrative VLAN are configured, this

option defaults to a VLAN ID of 4095.

Operational VLAN ID

Set Admin VLAN ID Field, on

page 7

Auxiliary VLAN in which the phone is a

member.

Used only if the phone does not receive an

auxiliary VLAN from the switch; otherwise

it is ignored.

Admin. VLAN ID

Set PC VLAN Field, on page 7Allows the phone to interoperate with 3rd

party switches that do not support a voice

VLAN. The Admin VLAN ID option must

be set before you can change this option.

PC VLAN

Set SW Port Configuration Field,

on page 7

Speed and duplex of the network port. Valid

values:

•Auto Negotiate

•1000 Full: 1000-BaseT/full duplex

(Supported only for Cisco Unified IP

Phone 6945.)

•100 Half: 100-BaseT/half duplex

•100 Full: 100-BaseT/full duplex

•10 Half: 10-BaseT/half duplex

•10 Full: 10-BaseT/full duplex

If the phone is connected to a switch,

configure the port on the switch to the same

speed/duplex as the phone, or configure both

to auto-negotiate.

If you change the setting of this option, you

must change the PC Port Configuration option

to the same setting.

SW Port Setup

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager

10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Network Setup Menu

To ChangeDescriptionOption

Set PC Port Configuration Field,

on page 8

Speed and duplex of the access port. Valid

values:

•Auto Negotiate

•1000 Full: 1000-BaseT/full duplex

(Supported only for Cisco Unified IP

Phone 6945.)

•100 Half: 100-BaseT/half duplex

•100 Full: 100-BaseT/full duplex

•10 Half: 10-BaseT/half duplex

•10 Full: 10-BaseT/full duplex

If the phone is connected to a switch,

configure the port on the switch to the same

speed/duplex as the phone, or configure both

to autonegotiate.

If you change the setting of this option, you

must change the SW Port Configuration

option to the same setting.

PC Port Setup

From Cisco Unified

Communications Manager

Administration, choose Device >

Phone >Phone Configuration.

Enables and disables Link Layer Discovery

Protocol Media Endpoint Discovery

(LLDP-MED) on the switch port. Use this

setting to force the phone to use a specific

discovery protocol, which should match the

protocol supported by the switch. Settings

include:

•Enabled: default

•Disabled

LLDP-MED: Switch

Port

Set Domain Name Field

Procedure

Step 1 Set the DHCP Enabled option to No.

Step 2 Scroll to the Domain Name option, press Edit, and then enter a new domain name.

Step 3 Press Apply, and then press Save.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications

Manager 10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Set Domain Name Field

Set Admin VLAN ID Field

Procedure

Step 1 Scroll to the Admin. VLAN ID option, press Edit , and then enter a new Admin VLAN setting.

Step 2 Press Apply, and then press Save.

Set PC VLAN Field

Procedure

Step 1 Make sure the Admin VLAN ID option is set.

Step 2 Scroll to the PC VLAN option, press Edit, and then enter a new PC VLAN setting.

Step 3 Press Apply, and then press Save.

Set SW Port Configuration Field

Procedure

Step 1 Unlock network setup options.

Step 2 Scroll to the SW Port Setup option and then press Edit.

Step 3 Scroll to the setting that you want and then press Select.

Step 4 To configure the setting on multiple phones simultaneously, enable the Switch Port Remote Configuration in

the Enterprise Phone Configuration (System >Enterprise Phone Configuration).

If the ports are configured for Switch Port Remote Configuration in Unified Communications Manager,

the data cannot be changed on the phone.

Note

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager

10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Set Admin VLAN ID Field

Set PC Port Configuration Field

Procedure

Step 1 Unlock network setup options.

Step 2 Scroll to the PC Port Setup option and then press Edit.

Step 3 Scroll to the setting that you want and then press Select.

Step 4 To configure the setting on multiple phones simultaneously, enable the PC Port Remote Configuration in the

Enterprise Phone Configuration (System >Enterprise Phone Configuration).

If the ports are configured for PC Port Remote Configuration in Unified Communications Manager,

the data cannot be changed on the phone.

Note

IPv4 Setup Menu Options

The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select the

IPv4 option on the Network Setup menu.

The following table describes the IPv4 Setup menu options.

For information about the keys you can use to edit options, see the Edit Values, on page 3.

Table 2: IPv4 Setup Menu Options

To ChangeDescriptionOption

Set DHCP Field, on page 9Indicates whether the phone has DHCP

enabled or disabled.

When DHCP is enabled, the DHCP server

assigns the phone an IP address. When

DHCP is disabled, the administrator must

manually assign an IP address to the phone.

For more information, see DHCP Usage,

on page 12.

DHCP

Set IP Address Field, on page

Internet Protocol (IP) address of the phone.

If you assign an IP address with this option,

you must also assign a subnet mask and

default router. See the Subnet Mask and

Default Router options in this table.

IP Address

Set Subnet Mask Field, on page

Subnet mask used by the phone.Subnet Mask

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications

Manager 10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Set PC Port Configuration Field

To ChangeDescriptionOption

Set Default Router Field, on

page 10

Default router used by the phone (Default

Router 1).

Default Router 1

Set DNS Server Field, on page

Primary Domain Name System (DNS)

server (DNS Server 1) and optional backup

DNS servers (DNS Server 2–5) used by the

phone.

DNS Server 1

Set Alternate TFTP Field, on

page 11

Indicates whether the phone is using an

alternative TFTP server.

Alternate TFTP

Set TFTP Server 1 Field, on

page 11

Primary Trivial File Transfer Protocol

(TFTP) server used by the phone. If you are

not using DHCP in your network and you

want to change this server, you must use the

TFTP Server 1 option.

If you set the Alternate TFTP option to yes,

you must enter a nonzero value for the TFTP

Server 1 option.

TFTP Server 1

Set TFTP Server 2 Field, on

page 11

Optional backup TFTP server that the phone

uses if the primary TFTP server is

unavailable.

TFTP Server 2

Release DHCP Address, on

page 12

Releases the IP address assigned by DHCP.DHCP Address Released

Set DHCP Field

Procedure

Step 1 Scroll to the DHCP option.

Step 2 Press Edit.

Step 3 Press either No to disable DHCP, or press Yes to enable DHCP.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager

10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Set DHCP Field

Set IP Address Field

Procedure

Step 1 Set the DHCP option to No.

Step 2 Scroll to the IP Address option, press Edit, and then enter a new IP Address.

Step 3 Press Apply, then press Save.

Set Subnet Mask Field

Procedure

Step 1 Set the DHCP Enabled option to No.

Step 2 Scroll to the Subnet Mask option, press Edit, and then enter a new subnet mask.

Step 3 Press Apply, then press Save.

Set Default Router Field

Procedure

Step 1 Set the DHCP Enabled option to No.

Step 2 Scroll to the appropriate Default Router option, press Edit, and then enter a new router IP address.

Step 3 Press Apply, then press Save.

Set DNS Server Field

Procedure

Step 1 Set the DHCP Enabled option to No.

Step 2 Scroll to the appropriate DNS Server option, press Edit, and then enter a new DNS server IP address.

Step 3 Press Apply, then press Save.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications

Manager 10.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Set IP Address Field

Autres manuels pour Unified 6921

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cisco Téléphone IP

Cisco

Cisco Unified 6921 Manuel utilisateur

Cisco

Cisco MCS 7800 Series Manuel utilisateur

Cisco

Cisco UNIFIED 9971 Manuel utilisateur

Cisco

Cisco 7945 Series Manuel utilisateur

Cisco

Cisco 7945G - Unified IP Phone VoIP Manuel

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Manuel utilisateur

Cisco

Cisco MCS 7800 Series Mode d’emploi

Cisco

Cisco Unified 8961 Manuel utilisateur

Cisco

Cisco 7941G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco 6961 - Unified IP Phone Standard VoIP Manuel utilisateur

Cisco

Cisco 7911G - IP Phone VoIP Manuel utilisateur

Cisco

Cisco DATAVOX 7941 Manuel utilisateur

Cisco

Cisco 6901 Standard Manuel utilisateur

Cisco

Cisco 7925G - Unified Wireless IP Phone VoIP Guide de référence rapide

Cisco

Cisco DATAVOX 7941 Manuel utilisateur

Cisco

Cisco 7841 Manuel utilisateur

Cisco

Cisco 8800 Series Manuel utilisateur

Cisco

Cisco Cisco 7960 Manuel utilisateur

Cisco

Cisco 8800 Series Manuel utilisateur

Cisco

Cisco 6900 Series Manuel utilisateur

Cisco

Cisco 8831 Manuel utilisateur

Cisco

Cisco IP Phone Manuel d'instructions

Cisco

Cisco Cisco 7940 Manuel utilisateur

Cisco

Cisco MCS 7800 Series Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur