Cisco 7912 Manuel utilisateur

Cisco 7912

Users Guide

Road Map to your Cisco IP Phone

Cisco IP Phone 7912

1 LCD

Screen

Displays features such as the time, date, your

phone numbers, caller ID, line/call status, and

softkey tabs

Cisco IP

Phone

series type Indicates the Cisco IP Phone Series to which your

phone belongs

3 Soft Keys

Softkeys let you engage functions displayed on the

corresponding LCD tabs. Softkey functions change

depending on the status of the phone (for example,

if the phone is active or idle.)

4 Navigation

button

Enables you to scroll through text and select

features displayed on the LCD screen. Provides

short-cut access to the Speed Dial Menu when the

phone is idle.

5 Menu

Button Provides access to phone services

6 Hold

Button

Places an active call on hold, resumes a held call,

or switches between an active call and a held call-

depending on the line state

7 Dial Pad Works exactly like the dial pad on a traditional

telephone.

8 Volume

Button Increases or decreases volume for the handset.

Also controls the ringer volume (if on hook).

Handset

with

indicator

light

Functions like a traditional handset. The light strip

at the top of the handset can be configured to

indicate incoming calls and new voice messages.

10 Footstand

How Do I Place a Call?

Use any of the following approaches to place a call:

• Lift the handset and dial the number

• Press the NewCall softkey and dial the number

• Enter the number with the phone on-hook, then press the

Dial softkey or lift the receiver

• Press the Redial softkey

How Do I Put a Call on Hold?

Press the Hold button. The Hold button will light red. To return

to the call, press the lit Hold button

A call on hold remains active even though you and the other

party cannot hear each other. You can answer or place another

call while a call is on hold.

Note Because engaging the Hold feature can generate music

or a beeping tone, avoid putting a conference call on

hold.

How Do I Adjust the Handset Volume?

Press the up or down Volume button when the handset is in use.

Press the Save softkey to save your change.

How Do I Adjust the Ringer Volume?

Press the up or down Volume button when the handset is not in

use (in the handset cradle).

How Do I Operate the LCD Screen?

Operating your phone’s LCD screen is easy. Use the Navigation

button, softkeys, and the key pad to make your selections.

To control the cursor:

• Press the >> softkey to re-position the cursor.

• Press the << softkey to delete a character or digit in an entry.

To select a menu item:

• Press the Navigation button to select (highlight) a menu item. Then press the Select

softkey.

• Press the number key on your phone’s dial pad that corresponds to the item number in

the menu.

Tip To exit out of a menu on your phone’s LCD screen,

press the Exit softkey.

How Do I Adjust the LCD Contrast?

To change the contrast of your phone’s LCD screen:

Step 1 Press the Menu button.

Step 2 Select Settings from the menu.

Step 3 Select Contrast from the Settings menu.

Step 4 Press the Up or Down softkeys to set the desired

contrast.

Step 5 Press the Ok softkey to accept your changes.

How Do I View my Missed Calls?

Your phone’s LCD display will indicate if you have missed a

call.

Use the Directories menu to view (and dial from) call records in

your Missed Calls, Received Calls, and Placed Calls directories.

A call record contains the time and date of the call, and a phone

number (if available).

To view your call records:

Step 1 Press the Menu button.

Step 2 Select Directories.

Step 3 Select a particular directory. Choose from:

• Missed Calls

• Received Calls

• Placed Calls

To dial from a call record:

Step 1 Follow the steps above to open your Missed, Received,

or Placed Calls directory.

Step 2 Use the Navigation button to select (highlight) a

particular record.

Step 3 If necessary, use the EditDial softkey to add digits to the

front of the number.

Step 4 Lift the handset or press the Dial softkey.

To delete your call records:

• Select an entire directory and press the Clear softkey.

• Select a particular call record and press the Delete softkey.

Supported Features at the University of Wyoming

Call Waiting: Gives you the ability to answer two calls at once.

1. Answer call #1, then the second call will present itself

on the display and the phone will beep once in your ear.

If you choose to Answer the second call, press the

Answer Softkey, which answers the second call and

places the first caller on hold.

2. To toggle between the two callers use the Hold Softkey

and the Resume Softkey.

Call Forward: Allows you to manually forward all calls coming into your set.

You can forward to an IP phone or non-IP phone.

To Activate: 1. Press the CFwdAll Softkey

2. Dial the number to which you want to forward

all calls.

To Cancel: 1. Press the CFwdAll Softkey

Call Transfer: Allows you to transfer a call to another on-campus telephone

number. Calls cannot be transferred off-campus.

To Activate: 1. With a call in progress, press the Trnsfer

Softkey.

2. Dial the number to which you are transferring

the call.

3. When you hear ringing, press the Trnsfer

again, or when the party answers, announce the

call and press Trnsfer.

4. Hang up to end your participation in the call.

Special Note: To abandon the transfer, press the

End Call Softkey which disconnects the transfer

and places the original caller on hold.

Conference: Allows you to set up a conference with nine other parties on or off

campus.

To Activate: 1. With a call in progress, press the Confrn

Softkey. This opens a new line while placing

the other party(ies) on hold.

2. Place a call to another party.

3. When the call connects, press Confrn again to

add this party to the call.

4. Repeat the first three steps to add another

caller.

Special Note: To abandon the addition of a

conferee, press the End Call Softkey, which

disconnects that leg of the conference and places the

other conferees on hold.

Dialing: With Cisco phones you have several different options for placing a

call.

Off-hook dialing: Lift handset and dial the number.

Predialing: Dial the number you want to call and either

pick up the handset which then initiates the

call or press the Dial Softkey (on a 7960

only) and this initiates the call on the

speakerphone if the handset is NOT picked

up.

On-hook dialing: Press the Speaker button and then dial

(NOT offered on 7912 set).

ReDial: This will automatically dial the last called number from your

phone.

To Activate: Lift handset and press the Redial Softkey.

Hold: Allows you to place a call on hold.

To Activate: During a call, press the Hold Softkey.

To Return to the call: Press the Resume Softkey.

Call Park: This allows you to park an active call and then retrieve it using

another phone within your phone system.

To Activate: 1. During an active call, press the More Softkey

until you see the Park tab.

2. Press the Park Softkey to park the call. The

LCD displays the number where the call is

parked.

3. Make a note of the Call Park number and hang

up.

4. To retrieve the parked call, go to any phone on

campus and dial the Call Park number.

Call Back: Notifies you that a previously dialed on-campus number (with a

busy tone) is now available.

To Activate: 1. When you receive a busy tone, press the

CallBack Softkey. The phone will indicate that

Callback has been initiated against the DN just

called. You are now free to make any other call.

2. Once the far end goes idle your set will play a

special ring tone to let you know that the DN

has become available and a new “Dial” Softkey

will be displayed. Press it and it will redial the

original number for you.

Call Join: If you are on an active call and a second call is received, you can

“join” both lines into a conference call.

To Activate: While on an active call, a second call comes into

your line. You can press the Answer Softkey to

answer the second call. This places the first caller

on hold. If you want to join the call press the

Confrn Softkey once to initiate the conference, then

again to connect the two calls together.

Distinctive Ring Per Line appearance: Allows you to set distinctive rings on each

line appearance that you have on your phone

(7960 sets only).

To Setup: 1. Press the Settings button on your phone.

2. Select #2 Ring Type.

3. Scroll down to the line appearance you

want to change and hit the Select

Softkey.

4. Select one of seven different ring

settings by highlighting the ring type you

want, then hit the Select Softkey, and

then the Ok Softkey.

Call Pickup: Allows you to answer calls to other phones within a designated call

pickup group.

To Activate: 1. As the phone rings at the extension within your

call pick-up group, pick up your handset to get

dial tone on your line.

2. Press the More Softkey to view the PickUp

Softkey.

3. Press the PickUp Softkey to transfer the call to

your extension.

4. Answer the incoming call that is redirected to

your phone by pressing the Answer Softkey.

Fast Dials: Allows you to pre-program up to 99 frequently dialed #’s from

your phone.

To set up: Go to the services screen on your phone, and select

My Fast Dials. Select the Assign softkey, then

toggle to the key you want to assign and press the

Select softkey. Now enter in the number you want

to program. Remember to put 9 or 91 in front of the

number if you are calling off campus. Once you

have entered the number press the Submit softkey,

you should get a message that tells you your fast

dial has been successfully assigned, select the Ok

softkey, and you are done.

To Use: Go to the services screen on your phone, and select

My Fast Dials. Toggle to the Fast Dial you want to

dial, the press the Dial softkey.

Autres manuels pour 7912

Table des matières

Autres manuels Cisco Téléphone IP

Cisco

Cisco 6945 Series Manuel utilisateur

Cisco

Cisco 7900 Series Manuel utilisateur

Cisco

Cisco Unified 6921 Mode d’emploi

Cisco

Cisco Small Business Pro SPA 504G Manuel utilisateur

Cisco

Cisco 7902G - Unified IP Phone VoIP Mode d’emploi

Cisco

Cisco 8811 Manuel utilisateur

Cisco

Cisco 7960G - IP Phone VoIP Manuel utilisateur

Cisco

Cisco 8941 Manuel utilisateur

Cisco

Cisco 6901 Standard Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Cisco

Cisco Small Business Pro SPA 508G Manuel utilisateur

Cisco

Cisco 8821 Manuel utilisateur

Cisco

Cisco Cisco 7960 Manuel utilisateur

Cisco

Cisco MCS 7800 Series Mode d’emploi

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Manuel utilisateur

Cisco

Cisco Expansion Module 7914 Manuel utilisateur

Cisco

Cisco 8800 Series Manuel utilisateur

Cisco

Cisco CP-7961G Mode d’emploi

Cisco

Cisco 7945G - Unified IP Phone VoIP Manuel utilisateur

Cisco

Cisco Expansion Module 7914 Manuel utilisateur

Cisco

Cisco 6800 Series Mode d’emploi

Cisco

Cisco MCS 7800 Series Manuel utilisateur

Cisco

Cisco 7800 Series Manuel utilisateur

Cisco

Cisco 8941 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur