Chrysler 300 2019 Manuel utilisateur

 QUICK REFERENCE GUIDE

CHRYSLER 300

Vehicle User Guide —

If Equipped

To access the Vehicle User Guide on your Uconnect

Touchscreen: Tap the Uconnect Apps button, then

tap the Vehicle User Guide icon on your touchscreen.

No Uconnect registration is required.

NOTE:

Vehicle User Guide features are not available while the

vehicle is moving.

Features

• Your User Guide — Updated in real-time

• Available when and where you need it

• Touchscreen convenience

• Customizable interface

• Maintenance schedules and information

• Multilingual

• Comprehensive icon & symbol glossary

Keyless Enter-N-Go —

Passive Entry

The Keyless Enter-N-Go system is an enhancement

to the vehicle’s key fob. This feature allows you to lock

and unlock the vehicle’s door(s) and trunk without

having to press the key fob lock or unlock buttons.

Uconnect 4C NAV With 8.4–inch Display

Vehicle User Guide Touchscreen Icon

VEHICLE USER GUIDE

— IF EQUIPPED PASSIVE ENTRY

To Unlock From The Driver

Or Passenger Side

With a valid Keyless Enter-N-Go key fob located

outside the vehicle and within 5 ft (1.5m) of the driver

or passenger side door handle, grab either front door

handle to unlock the door automatically.

To Lock The Vehicle

• Both front door handles have buttons located on

the outside of the handle. With one of the vehicle's

Keyless Enter-N-Go key fobs located outside the

vehicle and within 5 ft (1.5 m) of the driver's or

passenger front door handle, push the door handle

button to lock all four doors and trunk.

• DO NOT grab the door handle, when pushing the

door handle button. This could unlock the door(s).

NOTE:

• If “Unlock All Doors 1st Press” is programmed, all

doors will unlock when you grab hold of the front

driver's door handle.

• If “Unlock All Doors 1st Press” is programmed, all

doors and trunk will unlock when you push the trunk

button. If “Unlock Driver Door 1st Press” is pro-

grammed, only the trunk will unlock when you push

the trunk button.

Grab The Door Handle To Unlock

Push The Door Handle Button To Lock

Do Not Grab The Door Handle When Locking

• If a key fob is detected in the vehicle when locking

the vehicle using the power door lock switch, the

doors and trunk will unlock, and the horn will chirp

three times. On the third attempt, your key fob can

be locked inside the vehicle.

• After pushing the Keyless Enter-N-Go lock button,

you must wait two seconds before you can lock or

unlock the vehicle using the door handle. This is

done to allow you to check if the vehicle is locked

by pulling the door handle without the vehicle re-

acting and unlocking.

• If a Keyless Enter-N-Go door handle has not been

used for 72 hours, the Keyless Enter-N-Go feature

for that handle may time out. Pulling the deacti-

vated front door handle will reactivate the door

handle's Keyless Enter-N-Go feature.

To Enter The Trunk • With a valid Keyless Enter-N-Go key fob located

outside the vehicle and within 5 ft (1.5 m) of the

deck lid, push the button located on the center of

the light bar which is located on the deck lid above

the license plate.

For further information, and applicable warnings and

cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S.

Residents) or www.owners.mopar.ca (Canadian Resi-

dents).

Trunk Unlock Button

Cluster Display

The instrument cluster display features a driver inter-

active display that is located in the instrument cluster.

Pushing the controls on the left side of the steering

wheel allows the driver to select Vehicle Information

and Personal Settings.

• Push the up arrow button to scroll upward through

the main menus (Speedometer, Vehicle Info, Driver

Assist, Fuel Economy, Trip, Audio, Messages,

Screen Setup) and sub menus.

• Push the down arrow button to scroll downward

through the main menus and sub menus.

• Push the right arrow button to scroll forward to the

next menu or sub menu.

• Push the left arrow button to scroll back to a pre-

vious menu or sub menu.

• Push the OK button to access/select the informa-

tion screens, the submenu screens of a main menu

item, or to select a personal setting in the setup

menu. Push and hold the OK button for two sec-

onds to reset displayed/selected features that can

be reset.

Compass Calibration

This compass is self-calibrating, which eliminates the

need to set the compass manually. When the vehicle is

new, the compass may appear erratic, and the cluster

will display dashes (- -) until the compass is calibrated.

You may also calibrate the compass by completing

one or more 360 degree turns (in an area free from

large metal or metallic objects) until the dashes (- -)

displayed in the cluster turn off. The compass will now

function normally.

For further information, and applicable warnings and

cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S.

Residents) or www.owners.mopar.ca (Canadian Resi-

dents).

Instrument Cluster Display Controls

INSTRUMENT

CLUSTER DISPLAY

Pairing Procedure

Mobile phone pairing is the process of establishing a

wireless connection between a cellular phone and the

Uconnect system.

Start Pairing Procedure On The Radio

Uconnect 4C, 4C NAV:

1. Place the ignition in the ACC or ON position.

2. Press the “Phone” button in the Menu Bar on the

touchscreen.

3. Select “Settings.”

4. Select “Paired Phones.”

5. Select “Add device.”

• Uconnect Phone will display an “In progress”

screen while the system is connecting.

Pair Your iPhone:

To search for available devices on your Bluetooth

enabled iPhone:

1. Press the Settings button.

2. Select Bluetooth.

• Ensure the Bluetooth feature is enabled. Once

enabled, the mobile phone will begin to search

for Bluetooth connections.

3. When your mobile phone finds the Uconnect sys-

tem, select “Uconnect”.

Uconnect4C&4CNAV

Bluetooth On/Uconnect Device

PHONE PAIRING

Complete The iPhone Pairing Procedure:

1. When prompted on the mobile phone, accept the

connection request from Uconnect Phone.

NOTE:

Some mobile phones will require you to enter the PIN

number.

Pair Your Android Device:

To search for available devices on your Bluetooth

enabled Android Device:

1. Push the Menu button.

2. Select Settings.

3. Select Connections.

4. Turn Bluetooth setting to “On.”

• Ensure the Bluetooth feature is enabled. Once

enabled, the mobile phone will begin to search

for Bluetooth connections.

5. Once your mobile phone finds the Uconnect sys-

tem, select “Uconnect”.

• You may be prompted by your mobile phone to

download the phonebook, check “Do Not Ask

Again” to automatically download the phone-

book. This is so you can make calls by saying

the name of your contact.

Pairing Request Uconnect Device

Complete The Android Pairing Procedure:

1. Confirm the passkey shown on the mobile phone

matches the passkey shown on the Uconnect sys-

tem then accept the Bluetooth pairing request.

NOTE:

Some mobile phones require the PIN to be entered

manually, enter the PIN number shown on the

Uconnect screen.

For further information on Uconnect Phone, please

refer to “Uconnect Phone” in your Uconnect Owner’s

Manual Supplement.

Automatic High Beam —

If Equipped

This system automatically controls the operation of

the headlamp high beams as oncoming vehicles ap-

proach.

• The Automatic High Beam Headlamp Control can

be turned on or off using the Uconnect System.

• Push the turn signal lever away from you.

• With the headlight switch in the “AUTO” position,

the high beams are controlled automatically.

• Pull the turn signal lever toward you to manually

deactivate the system.

• To improve system recognition of crossing traffic,

and to limit use in a residential area, the vehicle

must be moving at a speed greater than 20 mph

(32 km/h) before the Automatic High Beam Mod-

ule (AHBM) begins requesting high beam

activation.

Pairing Request

LIGHTS

NOTE:

If the windshield or Automatic High Beam Headlamp

Control mirror is replaced, the mirror must be re-

aimed to ensure proper performance. See a local au-

thorized dealer.

For further information, and applicable warnings and

cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S.

Residents) or www.owners.mopar.ca (Canadian Resi-

dents).

Speed Control

When engaged, the Speed Control takes over accel-

erator operations at speeds greater than 25 mph

(40 km/h).

To Activate

Push the on/off button. To turn the system off, push

the on/off button a second time. The system should

be turned off when not in use.

To Set A Desired Speed

Turn the Speed Control on. When the vehicle has

reached the desired speed, push the SET (+) or the

SET (-) button and release. Release the accelerator

and the vehicle will operate at the selected speed.

To Deactivate

A soft tap on the brake pedal, pushing the CANC

button, or normal brake pressure while slowing the

vehicle will deactivate Speed Control without erasing

the set speed memory. Pushing the on/off button or

turning the ignition switch OFF erases the set speed in

memory.

To Resume Speed

To resume a previously set speed, push the RES but-

ton and release.

Speed Control Switches

1 — Push Cancel

2 — Push Set (+)/Accel

3 — Push Resume

4 — Push On/Off

5 — Push Set (-)/Decel

SPEED CONTROL

To Increase Speed

When the Speed Control is set, you can increase

speed by pushing the SET (+) button.

To Decrease Speed

When the Speed Control is set, you can decrease

speed by pushing the SET (-) button.

To Accelerate For Passing

Press the accelerator as you would normally. When the

pedal is released, the vehicle will return to the set

speed.

For further information, and applicable warnings and

cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S.

Residents) or www.owners.mopar.ca (Canadian Resi-

dents).

Adaptive Cruise Control

(ACC) — If Equipped

If your vehicle is equipped with Adaptive Cruise Con-

trol, the controls operate exactly the same as the

standard cruise control, with one difference. You can

set a specified distance you would like to maintain

between you and the vehicle in front of you.

• If the ACC sensor detects a vehicle ahead, ACC

will apply limited braking or acceleration automati-

cally to maintain a preset following distance while

matching the speed of the vehicle ahead.

• If the sensor does not detect a vehicle directly

ahead of you, it functions like a standard cruise

control system, maintaining the speed you set.

For further information, and applicable warnings and

cautions, please refer to the Owner’s Manual at

www.mopar.com/en-us/care/owners-manual.html

(U.S.

Residents) or www.owners.mopar.ca (Canadian Resi-

dents).

Adaptive Cruise Switches

1 — Adaptive Cruise Control (ACC) On/Off

2 — Distance Setting – Decrease

3 — Distance Setting – Increase

Autres manuels pour 300 2019

Table des matières

Autres manuels Chrysler Automobile

Chrysler

Chrysler Plymouth 1962 Manuel utilisateur

Chrysler

Chrysler Sebring Convertible Manuel utilisateur

Chrysler

Chrysler Automobile Manuel utilisateur

Chrysler

Chrysler 200 CONVERTIBLE 2011 Manuel utilisateur

Chrysler

Chrysler 1998 Voyager Manuel utilisateur

Chrysler

Chrysler Windsor C-71 1956 Manuel utilisateur

Chrysler

Chrysler 300 2017 Manuel utilisateur

Chrysler

Chrysler Concorde 1993 Manuel utilisateur

Chrysler

Chrysler ASPEN Manuel utilisateur

Chrysler

Chrysler 2004 Town and Country Manuel utilisateur

Chrysler

Chrysler Crossfire Manuel utilisateur

Chrysler

Chrysler Sebring Sedan Manuel utilisateur

Chrysler

Chrysler laser 1990 Document technique

Chrysler

Chrysler Voyager 2001 Manuel du propriétaire

Chrysler

Chrysler 2011 300 Limited Manuel utilisateur

Chrysler

Chrysler TOWN & COUNTRY 2013 Manuel utilisateur

Chrysler

Chrysler 2005 Sebring Manuel utilisateur

Chrysler

Chrysler Crossfire 2007 Manuel utilisateur

Chrysler

Chrysler 2009 Grand Caravan Manuel utilisateur

Chrysler

Chrysler RAM TRUCK 2500 1994 Manuel utilisateur

Chrysler

Chrysler TOWN & COUNTRY 2013 Manuel utilisateur

Chrysler

Chrysler 300 2014 Manuel utilisateur

Chrysler

Chrysler 300 2014 Manuel utilisateur

Chrysler

Chrysler 2010 PT Cruiser Manuel utilisateur

Manuels Automobile populaires d'autres marques

Toyota

Toyota 2000 Tundra Manuel utilisateur

CITROËN

CITROËN DS4 DSign Manuel utilisateur

Lexus

Lexus 2015 CT 200h Manuel utilisateur

Cadillac

Cadillac CTS 2008 Manuel utilisateur

Mercedes-Benz

Mercedes-Benz M-class ML 55 AMG Manuel utilisateur

Porsche

Porsche Boxster S Manuel utilisateur

GMC

GMC 2010 Savana 1500 Cargo Manuel utilisateur

KIAM

KIAM SPORTAGE 2014 Manuel de la liste des pièces

GMC

GMC 2013 Terrain Instructions de montage

GMC

GMC T-Series 1999 Manuel utilisateur

Mercury

Mercury 1998 Mystique Manuel utilisateur

Mercury

Mercury 2007 Mariner Manuel utilisateur

Mazda

Mazda 2007 Mazdaspeed 3 Mode d’emploi

Mazda

Mazda 2014 CX-5 Manuel utilisateur

GMC

GMC Chevrolet Express 2022 Manuel utilisateur

GMC

GMC 1997 Jimmy Manuel utilisateur

Chevrolet

Chevrolet 2012 Malibu Manuel utilisateur

Cadillac

Cadillac 2010 Escalade Manuel utilisateur