Chromasens allPIXA wave - CD40172 Version 1.0 4
6.11 Selecting a setting on the camera 70
6.12 Saving settings to the PC 70
6.12.1 Saving settings from CST to hard disk 70
6.12.2 Saving settings from the camera to hard disk 70
6.13 Transferring saved settings from the PC to the camera 71
6.14 Deleting settings on the camera 72
6.15 Setting the user level in CST 73
6.16 Resetting the camera: 73
6.17 Checking the camera state 74
6.18 Choosing a different configuration file for the parameter display 74
6.19 Register Edit 75
7Camera system setup –first steps 76
7.1 Camera Installation 76
7.2 Start up the system 77
7.3 Adjust camera to the environment (camera calibration) 77
7.4 Trigger and image enhancement functions 79
8Camera operation 80
8.1 Easy camera configuration using the simple setup view 80
8.2 Performing a white balancing on the camera 84
8.2.1 System preparation for white balancing 84
8.2.2 Setting the operation point automatically 84
8.2.3 Setting the operation point manually 86
8.3 Generating black (offset) reference 91
8.3.1 Create a black-level (offset) reference internally 92
8.3.2 Use a stored black (offset) level reference image 95
8.3.3 Prepare camera to acquire a black (offset) reference 97
8.4 Generating shading/ flat-field reference 101
8.4.1 Create white (gain) reference internally 102
8.4.2 Use a stored white (gain) reference image 106
8.4.3 Prepare camera to acquire a white (gain) reference 111
8.5 Using continuous white control 118
8.5.1 Continuous operating point adjustment at the edges 118
8.5.2 Image-synchronous operating point adjustment on the object (ROI) 119
8.6 Encoder connection and setup 121
8.6.1 Line trigger and encoder settings 121
8.6.2 Connect the encoder to the camera 121
8.6.3 Define the input channel in the camera 121
8.6.4 Configuration of the encoder mode and resolution 122
8.6.5 Encoder - enable /disable by external input signal 124
8.7 Editing the color conversion (correction) matrix 125
8.8 IO configuration 126
8.9 Configuring XLC4 light controllers using the RS485 interface 127
8.9.1 Adding XLC4 light controllers using automatic ID assignment 127
8.9.2 Configuring single XLC4 light controllers with CST 127
8.9.3 Configuring all connected light controllers using broadcasting 129
8.9.4 Error codes 130
