PMA_CHR_CD40195_R04_allPIXA_evo_UserManual.docx 10
2 Specifications and definitions
The allPIXA evo camera family is available in the following maximum resolutions:
◼8,192 pixels
◼10,240 pixels
◼15,360 pixels
The allPIXA evo camera comprises all functions required for supplying images with the same
color, brightness, and resolution of each operational area.
The allPIXA evo camera is especially suitable for inspection systems requiring a very high speed
and a consistently high color quality.
The camera is compliant with the GigE Vision 2.0 specification which defines the communication
interface protocol for any GigE Vision device. The device description of the camera is contained
in an XML file. For more information for GigE Vision see: https://www.automate.org/a3-
content/vision-standards-gige-vision.
The camera can be connected to the PC either with a single copper or fiber cable or with two
cables using Link Aggregation.
Continuous white balancing is possible during image acquisition to ensure optimum color
quality. In addition, offset and shading correction ensure the balance of different color pixel
sensitivities (DSNU and PRNU) as well as the illumination process.
The design was fully revised during development of the housing, which is impressively tough
but offers several screw-mounting options. Take notice that the wide range of adapter options
makes the installation simple for users.
The standard mount connections M72x0.75 for the 10k camera, or M95x1.0 for the 15k camera,
respectively, permit to use all commercially available standard lenses. In addition, special
adapters are available that permit to connect Chromasens accessories.
2.1 Camera highlights
◼10k and 15k tri-linear CMOS color line scan with 5.6 µm pixel size
◼8k multiline CMOS color line scan sensor with 5.0 µm pixel size
◼High accuracy sensor alignment
◼GigE-Vision-compliant (GigE-Vision 2.0)
◼3 x 8 bits color information on the output side; RGB spatial compensation in the camera
(also sub-pixel correction, patented)
◼ROI mode (one ROI selectable)
◼Continuous white balancing maintains a constant image brightness and color irrespective
of the temperature and service life of the illumination system
◼Incremental encoder port on the camera; this ensures simple handling and less
programming work
◼Flat field correction, fully automatic calculation internally in the camera
◼Gamma correction, brightness, and contrast controller, separate for each channel
◼Robust metal housing
◼Standard mount connections M72x0.75 for the 10k camera, or M95x1.0 for the 15k
camera, respectively
◼Special adapters permit to use Chromasens accessories
◼Internal test image generator
◼Area scanning with variable image lengths based on trigger inputs (light barriers)
