Christopher Ward C60 Sapphire Black Guide de l'utilisateur

C60 Sapphire Black

Owner’s Handbook

Time on your side

Your Christopher Ward watch has been designed in Britain

and engineered in Switzerland by highly talented craftspeople.

This ensures not only accurate and precise timekeeping, but also

brings a real pride of ownership that only watches of the highest

quality standards can hope to deliver.

You have made an investment, a good one, and the aim of this

manual is to help you make the most of that investment in what

we hope will be a lifetime of ownership.

Mike France

CEO & co-founder

Time on your side

C60 Sapphire Black

Congratulations on becoming the owner of a C60 Sapphire Black.

The result of years of research, experimentation and hard work,

it’s a timepiece that’s both beautiful and tough. Beautiful, because

of the translucent sapphire dial that lets you see deep into the

mechanics of the watch. Tough, because it’s a Trident: a diving

watch able to function at depths of up to 600m.

The pure, lab-grown sapphire dial has been machined to a thickness

of just 0.8mm. Its ‘smoked’ colour is achieved by exposure to silver

and carbon graphite vapour in a vacuum-sealed chamber. In total,

the sapphire goes through 20 steps and 80 operations before it’s

ready. Not only is sapphire crystal alluring, but its durability means

it will continue looking perfect and unblemished for far longer than

virtually any other material used for dials, including ceramic and

enamel.

Powering the watch is a Sellita SW200, a Swiss-made self-winding

movement known for its accuracy and reliability. You’ll be able to

see it working through both the front and back of the watch.

We want to thank you for buying this watch. Wear it in good health.

Features

• Swiss made

• 26 jewel self-winding mechanical

movement

• 38-hour power reserve

• Christopher Ward ‘Colimaçone’ nish

on rotor

• Anti-shock system

• Brushed and polished marine-grade 316L

stainless steel case

• Screw-down exhibition caseback with

smoked sapphire crystal

• Unidirectional stainless steel bezel

• Unique engraved serial number

• Anti-reective sapphire crystal

• Smoked sapphire crystal dial with matte

twin-ag motif at 12 o’clock

• Date calendar

• Central hacking seconds

• Top-brushed indexes with diamond

polished facets

• Signature Trident counter-balance on

seconds hand

• Super-LumiNova®Grade X1 GL C1-lled

hands and indexes

• Eco-friendly luxury presentation case and

owner’s handbook

Technical Information

Calibre Sellita SW200

Case 316L stainless steel

Diameter 40mm

Height 12.95mm

Weight 83g

Water resistance 60 ATM (600 metres)

Vibrations 28,800 per hour (4Hz)

Timing tolerance -20/+20 seconds per day

Lug to lug 47.46mm

Strap width 20mm

How to operate your C60 Sapphire Black

For a superior water resistance your crown is of the screw-down

type. The crown should sit ush to the case (position 1) in order

to maintain water resistance.

• First unscrew the crown anti-clockwise from the case to position

2for winding in power. Wind in a clockwise direction to re-power

the watch. Your C60 Sapphire Black has a maximum power

reserve of 38 hours when fully wound. Normal wearing will allow

the rotor to start re-powering the watch over time after putting

on your wrist.

• Pull gently into position 3. For rapid date correction, turn in a

clockwise direction.

• Pull gently into position 4. This position is used for handsetting

and stopping of the seconds hand. For precise time setting it is

recommended to pass beyond the desired minute and to set the

hand backwards.

Setting the time and date

1234

Unscrew and then pull

PLEASE NOTE:

Date correction should not be carried out between 20.00 hr and

02.00 hr as the watch gearing will already be aligning itself to

change the date. The crown should always be pushed in after

adjustment, and it is best to do so from position 3to avoid

advancing beyond the desired date. You must always ensure the

crown is fully tightened before any use in water.

1. Crown screw-down position

2. Manual winding

3.Date setting

4.Time setting

How to operate your C60 Sapphire Black

If using the bezel for a dive and let’s say the recognised maximum

“no-stop time” is 55 minutes, then in this example (shown right)

the time at the surface immediately before the dive is 10.08am.

However the bezel marker is at the 12.00 hr position.

• Move the bezel marker anti-clockwise so that it aligns with the

8 minute position.

• You can now read that the 55 minute no decompression limit

will occur at 3 minutes past the next hour.

Diving with your watch

PLEASE NOTE:

It is always useful and best practice to make a note on a dive slate

before entering the water and to carry a set of dive tables should the

dive plan change during the course of a dive. A safety stop for 3 to 5

minutes at 15ft is recommended at the end of all dives. A safety stop

for 3 minutes at 15ft is required any time you come within 3 pressure

groups of a no decompression limit, and for any dive to a depth of

100ft or deeper.

Bezel marker No decompression limit

Start of dive

Table des matières

Autres manuels Christopher Ward Montre

Christopher Ward

Christopher Ward C3 MALVERN Guide de l'utilisateur

Christopher Ward

Christopher Ward C65 trident CLASSIC Guide de l'utilisateur

Christopher Ward

Christopher Ward C7 Rosso Corsa Guide de l'utilisateur

Christopher Ward

Christopher Ward C3 Morgan Guide de l'utilisateur

Christopher Ward

Christopher Ward Lido Manuel utilisateur

Christopher Ward

Christopher Ward C60 Sapphire Manuel utilisateur

Christopher Ward

Christopher Ward C700 Guide de l'utilisateur

Christopher Ward

Christopher Ward C63 Colchester Guide de l'utilisateur

Christopher Ward

Christopher Ward C65 AM GT Limited Edition Guide de l'utilisateur

Christopher Ward

Christopher Ward C65 Cranwell 1 Series Guide de l'utilisateur

Christopher Ward

Christopher Ward C11 MSL Manuel utilisateur

Christopher Ward

Christopher Ward C60 Trident Pro COSC Guide de l'utilisateur

Christopher Ward

Christopher Ward C70 VW4 Limited edition Guide de l'utilisateur

Christopher Ward

Christopher Ward C65 Trident Bronze Ombre COSC Limited... Guide de l'utilisateur

Christopher Ward

Christopher Ward C8 M2.04 Limited Edition Guide de l'utilisateur

Christopher Ward

Christopher Ward C65 trident CLASSIC Guide de l'utilisateur

Christopher Ward

Christopher Ward C60 Trident Bronze Ombre COSC Limited... Guide de l'utilisateur

Christopher Ward

Christopher Ward C9 PULSOMETER Manuel utilisateur

Christopher Ward

Christopher Ward C90 Beckett's Power Reserve Guide de l'utilisateur

Christopher Ward

Christopher Ward C1000 Guide de l'utilisateur

Christopher Ward

Christopher Ward C8 'Al Deere' TMB Guide de l'utilisateur

Christopher Ward

Christopher Ward The Dixie Dean Chronometer Guide de l'utilisateur

Christopher Ward

Christopher Ward C70 DBR1/2 Guide de l'utilisateur

Christopher Ward

Christopher Ward C60 Abyss GMT Guide de l'utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

Timex

Timex W-214 Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur