Christopher Ward C65 Super Compressor Guide de l'utilisateur

C65 Super Compressor

Owner’s Handbook

Time on your side

Your Christopher Ward watch has been designed in Britain

and engineered in Switzerland by highly talented craftspeople.

This ensures not only accurate and precise timekeeping, but also

brings a real pride of ownership that only watches of the highest

quality standards can hope to deliver.

You have made an investment, a good one, and the aim of this

manual is to help you make the most of that investment in what

we hope will be a lifetime of ownership.

Mike France

CEO & co-founder

2222

C65 Super Compressor

It’s not often you get to own a piece of watchmaking history.

But when you strap on the C65 Super Compressor, that’s exactly

what’s happening.

The rst super compressor mechanism was invented in the 1950s

by case maker Ervin Piquerez to protect diving watches from the

increased water pressure they faced as scuba divers went deeper.

The apparatus used that pressure to force the watch’s caseback

against its O-ring gasket – boosting water-resistance with every

metre descended.

In the 1970s, super compressors fell out of fashion. But now they’re

back – in an exceptional timepiece.

Your C65 Super Compressor is the rst genuine super compressor

diving watch in 50 years. Not only does its ingenious mechanism

increase water-resistance the further you go down but the

contemporary build quality and nishing is leagues ahead of the

original models.

Turn it over, and the exhibition caseback – a rst for a super

compressor – shows you the all-important compression spring

and diving-bell logo (the mark Ervin Piquerez used to denote

authenticity).

So, whether you’re a serious diver. Or just someone who appreciates

the art of horology, your new timepiece brings together on-point

retro style and watchmaking excellence in one unforgettable

package.

Wear it in good health!

Features

• Swiss made

• 26 jewel self-winding mechanical

movement

• 38 hour power reserve

• Twin-ag engraving over ‘Colimaçoné’

nish on the rotor

• Cushion shaped marine grade stainless

steel case

• Screw-down exhibition caseback with

aluminium anodised compression ring

and divers helmet symbol

• Screw-down twin-ag stamped crown with

sandblasted lower area and polished top

• Crosshatched crown with anodised

aluminium outer ring

• Unique engraved serial number

• Internal rotating bezel (120 clicks)

• Anti-reective glass box sapphire crystal

• Signature Trident counter-balance on

seconds hand

• Super-LumiNova®Grade X1 GL C1-lled

hands and indexes

• Eco-friendly luxury presentation case and

owner’s handbook

Technical Information

Calibre Sellita SW200-1

Case 316L stainless steel

Diameter 41mm

Height 13.05mm

Lug to lug 47.12mm

Weight 72g

Water resistance 15 ATM (150 metres)

Vibrations 28,800 per hour (4 Hz)

Timing tolerance -20/+20 seconds per day

Strap width 22mm

How to operate your C65 Super Compressor

For a superior water resistance your crown is of the screw-down

type. The crown should sit ush to the case (position 1) in order

to maintain water resistance.

• First unscrew the crown anti-clockwise from the case to position

2for winding in power. Wind in a clockwise direction to re-power

the watch. Your C65 Super Compressor has a maximum power

reserve of 38 hours when fully wound. Normal wearing will allow

the rotor to start re-powering the watch overtime after putting

on your wrist. After a period of non-use we recommend that

you manually wind the watch at least 20 times to ensure there

is sucient power in the watch before the rotor maintains the

power.

• Pull gently into position 3. This position is used for handsetting

and stopping of the seconds hand. For precise time setting it is

recommended to pass beyond the desired minute and to set

the hand backwards.

Setting the time

Unscrew and then pull 7

1. Crown screw-down position

2. Manual winding

3.Time setting

How to operate your C65 Super Compressor

If using the internal bezel for a dive and let’s say the recognised

maximum “no-stop time” is 55 minutes, then in this example

(shown right) the time at the surface immediately before the dive is

10.10am. However the bezel marker is at the 12.00 hr position.

• Move the internal bezel with the 2 o’clock crown anti-clockwise so

that it aligns with the 10 minute position.

• You can now read that the 55 minute no decompression limit

will occur at 5 minutes past the next hour.

PLEASE NOTE:

It is always useful and best practice to make a note on a dive slate

before entering the water and to carry a set of dive tables should the

dive plan change during the course of a dive. A safety stop for 3 to 5

minutes at 15ft is recommended at the end of all dives. A safety stop

for 3 minutes at 15ft is required any time you come within 3 pressure

groups of a no decompression limit, and for any dive to a depth of

100ft or deeper.

Diving with your watch

Internal bezel marker No decompression limit

Dive setting crown Start of dive

Table des matières

Autres manuels Christopher Ward Montre

Christopher Ward

Christopher Ward C65 Dartmouth 1 Series Guide de l'utilisateur

Christopher Ward

Christopher Ward The Twelve Halo Guide de l'utilisateur

Christopher Ward

Christopher Ward C9 5 DAY AUTOMATIC Guide de l'utilisateur

Christopher Ward

Christopher Ward C6 Kingfisher Diver-Pro Manuel utilisateur

Christopher Ward

Christopher Ward C60 Elite GMT 1000 Guide de l'utilisateur

Christopher Ward

Christopher Ward C8 Pilot Revival Special Edition Guide de l'utilisateur

Christopher Ward

Christopher Ward C8 UTC Worldtimer Guide de l'utilisateur

Christopher Ward

Christopher Ward C65 GMT Worldtimer Guide de l'utilisateur

Christopher Ward

Christopher Ward The Dixie Dean Chronometer Guide de l'utilisateur

Christopher Ward

Christopher Ward C65 Cranwell 2 Series Guide de l'utilisateur

Christopher Ward

Christopher Ward C5 Malvern Revival Special Edition Manuel utilisateur

Christopher Ward

Christopher Ward C8 Power Reserve Guide de l'utilisateur

Christopher Ward

Christopher Ward C50 Malvern Guide de l'utilisateur

Christopher Ward

Christopher Ward C70MC Grand Prix Series Guide de l'utilisateur

Christopher Ward

Christopher Ward C9 PULSOMETER Manuel utilisateur

Christopher Ward

Christopher Ward C60 Lympstone Guide de l'utilisateur

Christopher Ward

Christopher Ward C63 Sealander Automatic Guide de l'utilisateur

Christopher Ward

Christopher Ward C8 PILOT Manuel utilisateur

Christopher Ward

Christopher Ward C11 MSL Manuel utilisateur

Christopher Ward

Christopher Ward C8 PILOT Guide de l'utilisateur

Christopher Ward

Christopher Ward C40 SpeedHawk Guide de l'utilisateur

Christopher Ward

Christopher Ward C7 Rapide Day Date COSC Limited Edition Guide de l'utilisateur

Christopher Ward

Christopher Ward C1 Worldglow Guide de l'utilisateur

Christopher Ward

Christopher Ward C60 Sapphire Manuel utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

Timex

Timex W-214 Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur