Christie Mirage 304K Instructions de montage
Installation and Setup Guide
020-102013-12
Mirage 304K (Bm.1)
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Our centers of excellence for manufacturing in Kitchener, Ontario, Canada and in Shenzhen, China are ISO
9001:2015 Quality Management System-certified.
For the most current technical documentation and office contact information, visit http://www.christiedigital.com.
Warranty
Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/
warranties/ or by contacting your Christie dealer or Christie.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products.
If printing this document, consider printing only the pages you need and select the double-sided option.
Please help us to conserve the environment we live in!
Content
Introduction...................................................... 6
Safety and warning guidelines........................................... 6
Installation safety and warning guidelines..................................8
Light intensity hazard distance.........................................8
Product labels...................................................10
Projector overview..................................................12
Contact your dealer.................................................12
Key features......................................................12
How the projector works..............................................13
List of components..................................................13
Product documentation...............................................13
Related documentation.............................................14
Installation and setup..............................................15
Site requirements.................................................. 15
Physical operating environment........................................15
Power connection................................................ 15
Projector components................................................16
IR/wired remote keypad..............................................17
Display panel components.............................................20
Positioning the projector..............................................21
Leveling the projector................................................21
Installing the projector lens............................................21
Connecting to AC power.............................................. 22
Turning on the projector..............................................23
Projector LED status indicators........................................23
Projector LED shutter indicators....................................... 24
Lamp states....................................................25
Turning off the projector............................................25
Calibrating the lens motor.............................................26
Removing the projection lens.........................................26
Aligning the image..................................................27
Selecting a test pattern.............................................27
Adjusting offset..................................................27
Mirage 304K (Bm.1) Installation and Setup Guide 3
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting boresight............................................... 28
Adjusting the fold mirror............................................30
Optimizing the integrator zoom and focus................................. 31
Adjusting DMD convergence..........................................33
Aligning the image with lens zoom and focus............................... 34
Running Auto Setup to optimize display settings............................. 34
Configuring Mirage 304K to work with Christie Link............................. 34
Disposing of the product packaging....................................... 35
Connecting devices and establishing communication.....................36
IMXB ports.......................................................36
Connecting a video source using 3G input card................................37
Connecting a video source using DVI...................................... 38
Connecting a video source using DisplayPort..................................38
Connecting a video source using HDMI.....................................39
Connecting a video source using HBMIC.................................... 40
Connecting a video source using TSIC......................................40
Connecting a video source using HDBaseT...................................41
Selecting a port configuration...........................................41
Selecting a video source..............................................42
Connecting to a computer or server.......................................42
Configuring the RS232 port............................................ 42
Setting up the Ethernet...............................................43
3D setup for Mirage projectors.......................................44
3D requirements...................................................44
Hardware requirements.............................................44
Software and content requirements.....................................44
Active stereo 3D configuration.......................................... 45
Passive stereo 3D configuration..........................................45
3D system timing.................................................. 46
3D input video configurations...........................................46
Setting up a single projector to display 3D content..............................46
Enabling 3D mode................................................46
Confirming the emitter setup......................................... 47
Configuring the projector for the 3D source................................ 47
Connecting devices to the 3D sync ports....................................47
Mirage 304K Specifications..........................................49
Content
Mirage 304K (Bm.1) Installation and Setup Guide 4
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Display.........................................................49
Control signal compatibility............................................ 49
Shipped input cards.................................................50
Optional input cards.................................................51
Temperature sensor thresholds..........................................51
Warning thresholds for fans ............................................52
Warning threshold for liquid cooling module..................................53
Power requirements.................................................53
Physical specifications................................................54
Accessories...................................................... 54
Regulatory.......................................................55
Safety....................................................... 55
Near field communication reader.......................................56
Electro-magnetic compatibility........................................ 56
Environmental.................................................. 56
Environment..................................................... 57
Signal connectivity specifications.................................... 58
HBMIC video formats................................................58
TSIC video formats for Mirage projectors....................................60
QDPIC video formats................................................ 60
TDPIC video formats................................................ 61
DDIC video formats.................................................61
THIC video formats................................................. 62
HDBase-T video formats.............................................. 62
3GIC video formats.................................................63
Dual-input 3D.....................................................64
Content
Mirage 304K (Bm.1) Installation and Setup Guide 5
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
This manual is intended for professionally trained operators of Christie high-brightness projection
systems.
The illustrations in this document are for representation only and may not depict your projector model
exactly.
Only Christie qualified technicians who are knowledgeable about the hazards associated with high-
voltage, ultraviolet exposure, and the high temperatures generated by the projector lamps are
authorized to assemble, install, and service the projector.
For complete Mirage 304K product documentation and technical support, go to
www.christiedigital.com.
Safety and warning guidelines
Read all safety and warning guidelines before installing or operating the projector.
This projector is intended for use in a non-cinema environment.
This projector must be operated in an environment that meets the operating range specification. Use
only the attachments and/or accessories recommended by Christie. Use of others may result in the
risk of fire, shock, or personal injury.
Mirage 304K (Bm.1) Installation and Setup Guide 6
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Warning! If not avoided, the following could result in death or serious injury.
• This product must be operated in an environment that meets the operating range as specified in
this document.
• Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
• EXTREME BRIGHTNESS! When accessing a restricted access location for product service or
maintenance, avoid exposure to the product beam path by turning the product power off and
disconnecting the product from AC power, or by shuttering the light source to avoid emissions
from the front aperture.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
• Keep fingers and other body parts away from the moving parts in the product. Tie back long
hair, and remove jewelry and loose clothing before manually adjusting the product.
• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
• SHOCK HAZARD! Power supply uses double pole/neutral fusing. Disconnect all power sources
before opening the product.
• FIRE HAZARD! Do not exceed 30 A for the breaker to power Input 1 on the projector.
• Install the product near an easily accessible AC receptacle.
• RADIATION HAZARD! Use of controls or adjustments, or performing procedures other than those
specified may result in hazardous radiation exposure.
Caution! If not avoided, the following could result in minor or moderate injury.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
• The American Conference of Governmental Industrial Hygienists (ACGIH) recommends
occupational UV exposure for an 8-hour day to be less than 0.1 microwatts per square
centimeters of effective UV radiation. A workplace evaluation is advised to assure employees are
not exposed to cumulative radiation levels exceeding the government guidelines for your area.
Be aware that some medications are known to increase sensitivity to UV radiation.
Introduction
Mirage 304K (Bm.1) Installation and Setup Guide 7
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installation safety and warning guidelines
Read all safety and warning guidelines before installing the projector.
Warning! If not avoided, the following could result in death or serious injury.
• Possible hazardous optical radiation emitted from this product. (Risk group 3)
• High leakage current present when connected to IT power systems.
• Christie products must be installed and serviced by Christie qualified technicians.
• Do not operate the product without all of its covers in place.
• A minimum of four people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
• Always install safety straps when the frame and projector are installed overhead.
• Observe load ratings and applicable local safety codes.
• When installing the projector in portrait mode, the rigging device must have a sufficient load
rating, as identified in this manual.
•
• This product must be installed within a restricted access location not accessible by the general
public.
• Install the product so users and the audience cannot enter the restricted area at eye level.
• Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
• Only Christie qualified technicians are permitted to open product enclosures.
Caution! If not avoided, the following could result in minor or moderate injury.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
• Only Christie qualified technicians are authorized to use the tools provided in the toolbox.
Light intensity hazard distance
This projector has been classified as Risk Group 3 as per the IEC62471 standard due to possible
hazardous optical and thermal radiation being emitted.
Warning! If not avoided, the following could result in serious injury.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam
within the hazard distance or install the product at the height that prevents exposure of
spectators' eyes within the hazard distance. The hazard zone must be no lower than 3.0 meters
above the floor and the horizontal clearance to the hazard zone must be a minimum 2.5 meters.
• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
The following show the zones for ocular and skin hazard distances.
Introduction
Mirage 304K (Bm.1) Installation and Setup Guide 8
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
• A—Hazard zone. The region of space where the projection light from the projector is above
emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary
or brief exposure (before a person can avert his or her eyes away from the light source). The
light may cause skin burns to occur.
• B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 2.5
meters.
• D—Vertical distance to hazard zone. The hazard zone must be no lower than 3.0 meters above
the floor.
If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal
clearance distance (Zone C) is not needed.
• E—Represents the top view of the projector.
• F—Represents the side view of the projector.
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.
Projection lens Part number Hazard distance
(m)
0.38:1 144-136101-XX 0.6
0.72:1 HB fixed lens 144-110103-XX 0.6
0.9:1 fixed lens 144-111014-XX 0.7
1.13-1.31:1 HB zoom lens
(Discontinued)
144-103105-XX 1.1
1.31-1.63:1 HB zoom lens 144-104106-XX 1.3
1.63-2.17:1 HB zoom lens
(Discontinued)
144-105107-XX 1.7
Introduction
Mirage 304K (Bm.1) Installation and Setup Guide 9
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projection lens Part number Hazard distance
(m)
1.99-2.71:1 HB zoom lens 144-106108-XX 2.2
2.71-3.89:1 HB zoom lens 144-107109-XX 3.1
3.89-5.43:1 HB zoom lens 144-108100-XX 4.2
4.96-7.69:1 HB zoom lens 144-109101-XX 6.0
Product labels
Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Warning! If not avoided, the following could result in death or serious injury.
Electric shock hazard. To avoid personal injury, disconnect all power sources before
performing maintenance or service.
Electrocution hazard. To avoid personal injury, always disconnect all power sources
before performing maintenance or service procedures.
Explosive material hazard. To avoid personal injury, disconnect all power sources
before performing maintenance or service, and wear Christie-approved protective
clothing.
Bright light hazard. To avoid personal injury, never look directly at the light source.
Introduction
Mirage 304K (Bm.1) Installation and Setup Guide 10
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Autres manuels pour Mirage 304K
1
Table des matières
Autres manuels Christie Projecteur
Christie
Christie LX750 Manuel utilisateur
Christie
Christie CP2000-SB Manuel utilisateur
Christie
Christie Solaria One Manuel utilisateur
Christie
Christie CP2308-G Instructions de montage
Christie
Christie VIVID 38-VIV205-01 Manuel utilisateur
Christie
Christie Boxer 30 Guide de l'utilisateur
Christie
Christie Mirage 2000 Manuel utilisateur
Christie
Christie Entero RPMSP-LED01 Manuel utilisateur
Christie
Christie LX400 Manuel utilisateur
Christie
Christie HD5Kc Manuel utilisateur
Christie
Christie DS+650 Manuel utilisateur
Christie
Christie LX501 Manuel utilisateur
Christie
Christie LW400 Manuel utilisateur
Christie
Christie Mirage 4K40-RGB Manuel utilisateur
Christie
Christie DWU951 Manuel utilisateur
Christie
Christie CineLife+ CP4415-RGB Manuel utilisateur
Christie
Christie Mirage 2000 Manuel utilisateur
Christie
Christie D4K35 Manuel utilisateur
Christie
Christie M Series Manuel utilisateur
Christie
Christie 38-VIV204-01 Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
