Christie LW400 Manuel utilisateur

LW400

U S E R M A N U A L - C O N C I S E

020-000051-01

ENGLISH

Projector

LW400

User Manual - Concise

Thank you for purchasing this projector.

Contents of package.................................. 1

Arrangement ............................................. 2

Connecting your devices........................... 3

Connecting power supply ......................... 4

Turning on the power................................ 4

Adjusting the projector’s elevator............. 5

Remote control.......................................... 5

Displaying the picture............................... 7

Turning off the power ............................... 7

Lamp ......................................................... 8

Air ﬁlter................................................... 10

Internal clock battery .............................. 11

Using the CD manual.............................. 12

Regulatory notices .................................. 13

Speciﬁcations .......................................... 14

Warranty and after-service ...................... 15

Contents

Contents of package

Your projector should come with the items shown below.

Check that all the items are included. Require of your

dealer immediately if any items are missing.

(1) Remote control with two AA batteries

(2) Power cord

(3) RGB cable

(4) Lens cover and Rivet and Strap

(5) User’s manuals (Book x1, CD x1)

(6) Security label

(1) (2)

BLANK LASER

ASPECT

PUSH

ENTER

PAGE UP

LASER

INDICATOR

MYSOURCE/

DOC.CAMERA

STANDBY/ON VIDEO RGB

PAGE DOWN

ESC MENU RESET

POSITION AUTO PbyP

MAGNIFY

OFF

MYBUTTON

VOLUME

FREEZE KEYSTONE MUTE

(3)

(4) (5)

(6)



CAUTION

►Keep the original packing materials for future reshipment. Be sure to use the original

packing materials when moving the projector. Use special caution for the lens.

WARNING

►Before using this product, be sure to read all manuals for this product. See “Using the

CD manual” (12) to read the manuals in the CD. After reading them, store them in a

safe place for future reference.

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

Arrangement

Please arrange the projector and the screen.

Install the projector in a stable, cool and airy place, keeping a space of 30 cm or more between the

sides of the projector and other objects such as walls. Avoid the projector from a hot, humid, dusty,

or smoky place.

Refer to the illustrations and tables below to determine screen size and projection distance.

The values shown in the table are calculated for a full size screen: 1280x800

(a) Screen size (diagonal)

(b) Projection distance (±10%)

On a horizontal surface

Suspended from the ceiling

(a) Screen

size

[inch (m)]

16:10 screen 4:3 screen

(b) Projection distance

[m (inch)]

[cm (inch)]

(b) Projection distance

[m (inch)]

[cm (inch)]

min. max. down up min. max. down up

30 (0.8) 0.9 (36) 1.1 (44) 0 (0) 40 (16) 1.0 (41) 1.3 (50) 0 (0) 46 (18)

40 (1.0) 1.2 (49) 1.5 (59) 0 (0) 54 (21) 1.4 (56) 1.7 (67) 0 (0) 61 (24)

60 (1.5) 1.9 (74) 2.3 (90) 0 (0) 81 (32) 2.1 (84) 2.6 (102) 0 (0) 91 (36)

70 (1.8) 2.2 (87) 2.7 (105) 0 (0) 94 (37) 2.5 (99) 3.0 (119) 0 (0) 107 (42)

80 (2.0) 2.5 (100) 3.1 (120) 0 (0) 108 (42) 2.9 (113) 3.5 (136) 0 (0) 122 (48)

90 (2.3) 2.9 (112) 3.4 (135) 0 (0) 121 (48) 3.2 (127) 3.9 (153) 0 (0) 137 (54)

100 (2.5) 3.2 (125) 3.8 (151) 0 (0) 135 (53) 3.6 (142) 4.3 (171) 0 (0) 152 (60)

120 (3.0) 3.8 (150) 4.6 (181) 0 (0) 162 (64) 4.3 (170) 5.2 (205) 0 (0) 183 (72)

150 (3.8) 4.8 (188) 5.8 (227) 0 (0) 202 (79) 5.4 (213) 6.5 (257) 0 (0) 229 (90)

200 (5.1) 6.4 (252) 7.7 (303) 0 (0) 269 (106) 7.2 (285) 8.7 (343) 0 (0) 305 (120)

250 (6.4) 8.0 (315) 9.6 (379) 0 (0) 337 (132) 9.1 (357) 10.9 (429) 0 (0) 381 (150)

300 (7.6) 9.6 (378) 11.6 (455) 0 (0) 404 (159) 10.9 (428) 13.1 (515) 0 (0) 457 (180)

350 (8.9) 11.2 (442) 13.5 (531) 0 (0) 471 (185) 12.7 (500) 15.3 (602) 0 (0) 533 (210)

• Consult with your dealer before a

special installation such as suspending

from a ceiling.

(b)

(a)

(b)

(a)

WARNING

►Install the projector in a stable horizontal position.

►Place the projector in a cool place, and ensure that there is sufﬁcient ventilation.

►Do not place the projector any place where it may get wet.

CAUTION

►Avoid placing the projector in smoky, humid or dusty place.

►Position the projector to prevent light from directly hitting the projector’s remote

sensor.

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

ENGLISH

VIDEO

CONTROL

AUDIO IN1

AUDIO IN2

AUDIO OUT

RGB

OUT

RGB1

RGB2

HDMI

R L R L

AUDIO IN3 AUDIO IN4

LAN

CB/PB

Y CR/PR

B/CB/PB R/CR/PR

G/Y

H V

USB

REMOTE

CONTROL

S-VIDEO

RGB OUT

AUDIO OUT

RGB OUT

AUDIO OUT

RS-232C

LAN

RGB IN

BLANK LASER

ASPECT

PUSH

ENTER

PAGEUP

LASER

INDICATOR

MYSOURCE/

DOC.CAMERA

STANDBY/ON VIDEO RGB

PAGEDOWN

ESC MENU RESET

POSITION AUTO PbyP

MAGNIFY

OFF

MYBUTTON

VOLUME

FREEZE KEYSTONE MUTE

AUDIO IN

Y CB/PBCR/PR

COMPONENT VIDEO OUT R L

AUDIO OUT

VIDEO OUT

S-VIDEO OUT

HDMI USB-A

R L

AUDIO OUT

R L

AUDIO OUT

Connecting your devices

Before connecting devices, please read the manuals for all the devices that you want to connect with

this projector, to make sure that the connection is proper and prepare the connectors needed. And

connect them properly according to the manuals.

Monitor

Remote

control

Speakers

(with an

ampliﬁer)

VCR/DVD player

WARNING

►Do not disassemble or modify the projector and accessories.

►Be careful not to damage the cables, and do not use damaged cables.

CAUTION

►Turn off all devices and unplug their power cords prior to connecting them to

projector.

►Use appropriate accessory or designated cables. Ask your dealer about non-accessory

cables which may be required a speciﬁc length or a ferrite core by the regulations. For

cables with a core only at one end, connect the end with the core to the projector.

►Make sure that devices are connected to the correct ports.

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

Connecting power supply

1. Connect the connector of the power cord to the

AC IN

AC IN (AC

inlet) of the projector.

2. Firmly plug the power cord's plug into the outlet.

AC IN

AC IN (AC inlet)

to the outlet

Connector of the

power cord

Turning on the power

1. Make sure that the power cord is ﬁrmly and correctly connected

to the projector and the outlet.

2. Remove the lens cover, and set the power switch to the ON

position (marked “

I”).

The

POWER

POWER indicator will light up in steady orange. Then

wait several seconds because the buttons may not function for

these several seconds.

3. Press the

STANDBY/ON

STANDBY/ON button on the projector or the remote

control.

The projection lamp will light up and the

POWER

POWER indicator will

begin blinking in green. When the power is completely on, the

indicator will stop blinking and light in steady green.

STANDBY/ON

STANDBY/ON button

POWER

POWER indicator

NOTE

• When the AUTO ON in the OPTION menu is set to the TURN ON, and the power was turned

off by the power switch last time, turning the power switch on makes the projection lamp light

on without pushing the

STANDBY/ON

STANDBY/ON button. For more information, please see the “Operating

Guide” in the CD.

Power

switch

WARNING

►A strong light is emitted when the projector’s power is on. Do not look into the lens

of the projector or look inside of the projector through any of the projector’s openings.

WARNING

►Please use extra caution when connecting the power cord, as incorrect or faulty

connections may result in ﬁre and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, consult your

dealer to get a new one.

• Only plug the power cord into an outlet whose voltage is matched to the power cord.

The power outlet should be close to the projector and easily accessible. Remove the

power cord for complete separation.

• Never modify the power cord.

BLANK LASER

ASPECT

PUSH

ENTER

PAGEUP

LASER

INDICATOR

MYSOURCE/

DOC.CAMERA

STANDBY/ON VIDEO RGB

PAGEDOWN

ESC MENU RESET

POSITION AUTO PbyP

MAGNIFY

OFF

MYBUTTON

VOLUME

FREEZE KEYSTONE MUTE

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

ENGLISH

BLANK LASER

ASPECT

PUSH

ENTER

PAGE UP

LASER

INDICATOR

MYSOURCE/

DOC.CAMERA

STANDBY/ON VIDEO RGB

PAGE DOWN

ESC MENU RESET

POSITION AUTO PbyP

MAGNIFY

OFF

MY BUTTON

VOLUME

FREEZE KEYSTONE MUTE

Adjusting the projector's elevator

Use the elevator feet to place the projector horizontally. Using the feet can also

tilt the projector in order to project at a suitable angle to the screen, elevating

the front side of the projector within 10 degrees.

This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is

adjustable while pulling up the elevator knob on the same side as it.

1. To loose an elevator foot, pull up the elevator knob on the same side as it.

2. Position the front side of the projector to the desired height.

3. Release the elevator knobs in order to lock the elevator feet.

4. To ﬁnely adjust, twist the foot.

10°

Remote control

Laser pointer

The laser beam is emitted and the

LASER INDICATOR

LASER INDICATOR lights while the

LASER

LASER button is pressed.

LASER INDICATOR

LASER

LASER button

The laser beam outlet

WARNING

►Do not handle the elevator knobs without holding the projector, since the projector

may drop down.

►Do not tilt the projector other than elevating its front within 10 degrees using the

adjuster feet. A tilt of the projector exceeding the restriction could cause malfunction or

shortening the lifetime of consumables, or the projector itself.

WARNING

►Never hit an eye with the laser beam, and use the laser pointer except to serve as

a pointer to a screen. The laser beam can cause vision problems, and also may cause

radiation exposure.

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

Installing batteries

Please load the batteries before using the remote control.

1. .revocyrettabehtevomerdnakcabedilS

2. (seirettabAAowtehttuP HITACHI MAXELL, Part No.LR6 or R6P)

into the holder, according to the polarity markings (+) and (-) on the holder.

3. .etatsremrofstiotkcabrevocyrettabehttuP

Remote control (continued)

Buttons

(1) STANDBY/ONSTANDBY/ON button

(2) VIDEOVIDEO button (3) RGBRGB button

(4) MY SOURCE/DOC.CAMERAMY SOURCE/DOC.CAMERA button

(5) SEARCHSEARCH button (6) BLANKBLANK button

(7) LASERLASER button (8) ASPECTASPECT button

(9) Lever switch : acting 3 functions as below.

Cursor button ▲: to slide toward the side marked ▲.

Cursor button ▼: to slide toward the side marked ▼.

ENTERENTER button : to push down the center point.

(10) Cursor button ◄(11) Cursor button ►

(12) PAGE UPPAGE UP button (13) PAGE DOWNPAGE DOWN button

(14) ESCESC button (15) MENUMENU button

(16) RESETRESET button (17) POSITIONPOSITION button

(18) AUTOAUTO button (19) PbyPPbyP button

(20) MAGNIFYMAGNIFY ONON/OFFOFF button

(21) MY BUTTON 1MY BUTTON 1 button (22) MY BUTTON 2MY BUTTON 2 button

(23) VOLUME +VOLUME +/--button (24) FREEZEFREEZE button

(25) KEYSTONEKEYSTONE button (26) MUTEMUTE button

BLANK LASER

ASPECT

PUSH

ENTER

PAGE UP

LASER

INDICATOR

MY SOURCE/

DOC.CAMERA

STANDBY/ON VIDEO RGB

PAGE DOWN

ESC MENU RESET

POSITION AUTO PbyP

MAGNIFY

OFF

MY BUTTON

VOLUME

FREEZE KEYSTONE MUTE

(6)

(1) (3)

(18)

(24)

(16)

(14)

(19)

(22)

(8) (9)

(11)

(12)

(15)

(17)

(20)

(7)

(10)

(13)

WARNING

►Always handle the batteries with care and use them only as directed. Improper use

may result in battery explosion, cracking or leakage, which could result in ﬁre, injury

and/or pollution of the surrounding environment.

• Be sure to use only the batteries speciﬁed. Do not use batteries of different types at the

same time. Do not mix a new battery with used one.

• Make sure the plus and minus terminals are correctly aligned when loading a battery.

• Keep a battery away from children and pets.

• Do not recharge, short circuit, solder or disassemble a battery.

• Do not place a battery in a ﬁre or water. Keep batteries in a dark, cool and dry place.

• If you observe battery leakage, wipe out the leakage and then replace a battery. If the

leakage adheres to your body or clothes, rinse well with water immediately.

• Obey the local laws on disposing the battery.

(2) (4)

(5)

(25)

(23)

(21)

(26)

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

ENGLISH

Displaying the picture

1. Make sure that the signal source is sending the signal to the

projector.

2. Use the

VOLUME +

VOLUME +/

-buttons to adjust the volume. To have

the projector silent, press the

MUTE

MUTE button on the remote

control.

3. Press the

INPUT

INPUT button on the projector.

Each time you press the button, the projector switches its input

port in turn.

4. Press the

ASPECT

ASPECT button on the remote control. Each time

you press the button, the projector switches the mode for

aspect ratio in turn.

5. Use the zoom ring to adjust the screen size.

6. Use the focus ring to focus the picture.

7. Use the vertical lens shift dial to shift the picture upward or

downward. It is recommended to adjust the picture upward.

8. Use the horizontal lens shift dial to shift the picture left or

right.

ASPECT

button

INPUT

INPUT button

Focus ringZoom ring

Top

1/2

1/10

Turning off the power

1. Press the

STANDBY/ON

STANDBY/ON button on the projector or the remote

control.

The message “Power off?” will appear on the screen for about

5 seconds.

2. Press the

STANDBY/ON

STANDBY/ON button on the projector or the remote

control again while the message appears.

The projector lamp will go off, and the

POWER

POWER indicator will

begin blinking in orange.

Then the

POWER

POWER indicator will stop blinking and light in

steady orange when the lamp cooling is complete.

3. Make sure that the

POWER

POWER indicator lights in steady orange,

and set the power switch to the OFF position (marked “

O”).

The

POWER

POWER indicator will go off. Attach the lens cover.

Do not turn the projector on for 10 minutes or more after turning it off. Turning the projector on

again too soon could shorten the lifetime of some consumable parts of the projector.

STANDBY/ON

STANDBY/ON button

POWER

POWER indicator

Power

switch

BLANK LASER

ASPECT

PUSH

ENTER

PAGE UP

LASER

INDICATOR

MYSOURCE/

DOC.CAMERA

STANDBY/ON VIDEO RGB

PAGE DOWN

ESC MENU RESET

POSITION AUTO PbyP

MAGNIFY

OFF

MY BUTTON

VOLUME

FREEZE KEYSTONE MUTE

BLANK LASER

ASPECT

PUSH

ENTER

PAGEUP

LASER

INDICATOR

MYSOURCE/

DOC.CAMERA

STANDBY/ON VIDEO RGB

PAGEDOWN

ESC MENU RESET

POSITION AUTO PbyP

MAGNIFY

OFF

MYBUTTON

VOLUME

FREEZE KEYSTONE MUTE

WARNING

►

Do not touch around the lamp cover and the exhaust vents during use or just after use,

since it is too hot.

MUTE

MUTE button

VOLUME +

VOLUME +/

-buttons

Lens shift cover

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

Lamp

A lamp has ﬁnite product life. Using the lamp for long periods of time could cause the pictures

darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or

burn out soon after you start using them.

Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make

contact with your dealer and tell the lamp type number.

Type number = 003-002118-01 (DT00873)

Replacing the lamp

1. Turn the projector off, and unplug the power cord. Allow the

projector to cool for at least 45 minutes.

2. Prepare a new lamp.

If the projector is mounted on a ceiling, or if the lamp has

broken, also ask the dealer to replace the lamp.

In case of replacement by yourself,

3. Loosen the screw (marked by arrow) of the lamp cover and

then slide the lamp cover to the side to remove it.

4. Loosen the 3 screws (marked by arrow) of the lamp, and

slowly pick up the lamp by the handles.

5. Insert the new lamp, and retighten ﬁrmly the 3 screws of the

lamp that are loosened in the previous process to lock it in

place.

6. Slide the lamp cover back in place and ﬁrmly fasten the

screw of the lamp cover.

7. Turn the projector on and reset the lamp time using the

LAMP TIME item in the OPTION menu.

(1) Press the

MENU button to display a menu.

(2) Point at the “Go to Advanced Menu …” in the menu

using the ▼/▲button, then press the ►button.

(3) Point at the “OPTION” in the left column of the menu

using the ▼/▲button, then press the ►button.

(4) Point at the “LAMP TIME” using the ▼/▲button, then

press the ►button. A dialog will appear.

(5) Press the ▲button to select “RESET” on the dialog. It

performs resetting the lamp time.

NOTE

• Please reset the lamp time only when you have replaced the lamp, for a suitable indication about

the lamp.

The lamp cover

The handles

LW400 User Manual - Concise

020-000051-01 Rev.1 (05/08)

Autres manuels pour LW400

Table des matières

Autres manuels Christie Projecteur

Christie

Christie J Series Manuel utilisateur

Christie

Christie LWU420 Manuel utilisateur

Christie

Christie Vivid LX20 Mode d’emploi

Christie

Christie DHD600-G Manuel utilisateur

Christie

Christie LW502 Manuel utilisateur

Christie

Christie GraphXMASTER DLV1400-DX Manuel utilisateur

Christie

Christie HS Series Instructions de montage

Christie

Christie DS+650 Manuel utilisateur

Christie

Christie CP2230 Manuel utilisateur

Christie

Christie CineIPM-2K Manuel utilisateur

Christie

Christie LX1750 Manuel utilisateur

Christie

Christie DWX600-G Manuel utilisateur

Christie

Christie Captiva Series Manuel utilisateur

Christie

Christie RoadRunner LX65 Manuel utilisateur

Christie

Christie CineLife+ 4K-RGB Instructions de montage

Christie

Christie H Series Manuel utilisateur

Christie

Christie LW650 Manuel utilisateur

Christie

Christie Vivid LX35 Manuel utilisateur

Christie

Christie 599 GS Series Manuel d'utilisation et d'entretien

Christie

Christie LX1750 Manuel utilisateur

Christie

Christie Solaria CP2210 Manuel utilisateur

Christie

Christie VIVID 38-VIV205-01 Manuel utilisateur

Christie

Christie LX700 Manuel utilisateur

Christie

Christie M RGB Series Instructions de montage

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur