Christie CP2420-Xe Instructions de montage

Installation and Setup Guide

020-103555-01

CP2420-Xe and CP4420-Xe

NOTICES

All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.

GENERAL

Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this

document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary

depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on

information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied

warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection

with the performance or use of this material. Manufacturing facilities in Canada and China are ISO 9001 certified.

For the most current technical documentation and office contact information, visit http://www.christiedigital.com.

Warranty

Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/

warranties/ or by contacting your Christie dealer or Christie.

PREVENTATIVE MAINTENANCE

Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in

accordance with the maintenance schedule specified by Christie, will void the warranty.

ENVIRONMENTAL

The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical

and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according

to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the

environment we live in!

Content

Introduction...................................................... 5

Product documentation................................................5

Related documentation..............................................5

Safety precautions...................................................6

General safety precautions........................................... 6

Lamp safety precautions.............................................7

AC power precautions...............................................7

Light intensity hazard distance.........................................8

Product labels...................................................10

Key features......................................................13

List of components..................................................13

Accessories.................................................... 14

Contact your dealer.................................................15

Technical support...................................................16

Installing and setting up............................................17

Site requirements.................................................. 17

Projector components................................................18

Preparing the installation site...........................................19

Required tools.................................................... 19

Lifting and positioning the projector.......................................19

Adjusting the projector tilt and level.......................................20

Installing the optional touch panel control...................................21

Connecting external exhaust ducting...................................... 21

Installing the primary lens.............................................23

Installing the zoom motor kit...........................................24

Installing the lamp..................................................25

Connecting the projector to AC power with a permanent connection...................27

Connecting the projector to AC power with a pluggable type B connection............... 29

Connecting the projector to an uninterruptible power supply (optional).................30

Turning the projector on for the first time................................... 30

Connecting devices and establishing communication.....................31

Video Input panel.................................................. 31

CP2420-Xe and CP4420-Xe Installation and Setup Guide 3

020-103555-01 Rev. 1 (03-2022)

Using the Remote user interface (UI)......................................32

Turning the projector on or off.......................................... 33

Logging on to the projector............................................ 33

Turning the light source on or off.........................................34

Activating marriage.................................................34

Activating IMB marriage.............................................. 34

Operation....................................................... 35

Turning the projector on..............................................35

Turning the projector off..............................................35

Projector power states............................................... 35

Adjusting the image............................................... 36

Maximizing light output...............................................36

Calibrating the Intelligent Lens System.....................................36

Aligning the image..................................................36

Adjusting the offset.................................................37

Adjusting offset by using an ILS .........................................38

Correcting vignetting................................................ 38

Correcting keystone effect.............................................38

Adjusting the left and right boresight......................................39

Adjusting the top and bottom boresight.....................................41

Adjusting DMD convergence............................................43

Correcting color convergence using ECC.................................... 45

Adjusting the fold mirror..............................................46

Calibrating the color.................................................47

Regulatory...................................................... 48

Safety......................................................... 48

Electro-magnetic compatibility.......................................... 48

Emissions..................................................... 48

Immunity..................................................... 48

Environmental.................................................... 48

Content

CP2420-Xe and CP4420-Xe Installation and Setup Guide 4

020-103555-01 Rev. 1 (03-2022)

Introduction

This manual is intended for professionally trained operators of Christie high-brightness CP2420-Xe/

CP4420-Xe projection systems.

For complete production documentation and technical support, go to www.christiedigital.com.

Product documentation

For installation, setup, and user information, see the product documentation available on the Christie

website. Read all instructions before using or servicing this product.

To access the documentation from the Christie website:

• Go to this URL: https://bit.ly/3vxrm4Y or

https://www.christiedigital.com/products/cinema/projection/cinelife-plus-series/.

• Scan the QR code using a QR code reader app on a smartphone or tablet.

• On the product page, select the model and switch to the Downloads tab.

Related documentation

Additional information on this product is available in the following documents.

•CP2420-Xe and CP4420-Xe Product Safety Guide (P/N: 020-103564-XX)

•CineLife+ User Guide (P/N: 020-103073-XX)

•CineLife+ Serial Commands Guide (P/N: 020-103075-XX)

•CP2420-Xe and CP4420-Xe Service Guide (P/N: 020-103566-XX)

CP2420-Xe and CP4420-Xe Installation and Setup Guide 5

020-103555-01 Rev. 1 (03-2022)

Safety precautions

Learn about the safety precautions related to the Christie CP2420-Xe/CP4420-Xe projector.Learn about

the safety precautions related to the Christie CP2420-Xe/CP4420-Xe projectors.. This projector is

intended for use in a cinema environment.

General safety precautions

Read all safety and warning guidelines before installing or operating the projector.

Warning! If not avoided, the following could result in death or serious injury.

• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be

tripped over, or damaged by persons walking on or objects rolling over the cables.

• This product must be installed within a restricted access location not accessible by the general

public.

• Only personnel who are trained on the precautions for the restricted access location can be

granted entry to the area.

• Install the product so users and the audience cannot enter the restricted area at eye level.

• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.

• High leakage current present when connected to IT power systems.

• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts

specified by Christie.

• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

• A minimum of four people or appropriately rated lift equipment is required to safely lift, install,

or move the product.

• Do not install or operate the projector in any position that does not meet the stated product

specifications for alignment and orientation.

Caution! If not avoided, the following could result in minor or moderate injury.

• Only Christie qualified technicians are permitted to open product enclosures.

Introduction

CP2420-Xe and CP4420-Xe Installation and Setup Guide 6

020-103555-01 Rev. 1 (03-2022)

Lamp safety precautions

Read all safety and warning guidelines before installing the projector lamp.

Warning! If not avoided, the following could result in death or serious injury.

• This procedure must be performed by Christie qualified technicians.

• EXPLOSION HAZARD! Always wear manufacturer approved protective safety clothing (gloves,

jacket, face shield) whenever the lamp door is open or when handling the lamp. Any local or

federal specifications take precedence over Christie's protective clothing recommendations.

• Do not open the lamp door while the lamp is on.

• EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the

product, disconnecting it from AC, and opening the lamp door.

• EXPLOSION HAZARD! Do not stress the glass of a lamp or bare bulb in any way.

• EXPLOSION HAZARD! Lamps and bare bulbs, even when packaged, may explode if dropped or

mishandled.

• EXPLOSION HAZARD! Handle a lamp by the cathode and anode end shafts only. Do not handle

the lamp by the glass.

• EXPLOSION HAZARD! Do not over-tighten the lamp.

• Do not look directly into the lens when the light source is on. The extremely high brightness can

cause permanent eye damage.

• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated

light beam of the projector.

Caution! If not avoided, the following could result in minor or moderate injury.

• Improper installation of the lamp can damage the projector.

• Incorrect lamp power supply and igniter connections can damage the product.

AC power precautions

Read all safety and warning guidelines before connecting to AC power.

Warning! If not avoided, the following could result in death or serious injury.

• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by

Christie.

• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and

power plug meet the appropriate local rating standards.

• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage

and current, as specified on the license label.

• SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.

• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,

removing components, or opening any enclosure.

• Install the product near an easily accessible AC receptacle.

Caution! If not avoided, the following could result in minor or moderate injury.

• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.

• SHOCK HAZARD! Power supply uses double pole/neutral fusing.

Introduction

CP2420-Xe and CP4420-Xe Installation and Setup Guide 7

020-103555-01 Rev. 1 (03-2022)

Light intensity hazard distance

This projector has been classified as Risk Group 3 as per the IEC 62471-5:2015 standard due to

possible hazardous optical and thermal radiation being emitted.

Warning! If not avoided, the following could result in serious injury.

• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be

permitted.

• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam

within the hazard distance or install the product at the height that prevents exposure of

spectators' eyes within the hazard distance. The hazard zone must be no lower than 2.5 meters

(US installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand and the horizontal clearance to the hazard zone must be a minimum 1.0

meters.

• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.

The following show the zones for ocular and skin hazard distances.

• A—Hazard zone. The region of space where the projection light from the laser-illuminated

projector is above emission limits for Risk Group 2. The light intensity may cause eye damage

after a momentary or brief exposure (before a person can avert his or her eyes away from the

light source). The light may cause skin burns to occur.

• B—Hazard distance. Operators must control access to the beam within the hazard distance or

install the product preventing potential exposure of the spectators' eyes from being in the

hazard distance.

• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0

meters.

• D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters (US

installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand.

If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal

clearance distance (Zone C) is not needed.

• E—Represents the top view of the projector.

Introduction

CP2420-Xe and CP4420-Xe Installation and Setup Guide 8

020-103555-01 Rev. 1 (03-2022)

• F—Represents the side view of the projector.

Projection lens Part number

High brightness

0.9:1 zoom 38-809071-XX

1.25-1.83:1 zoom 108-342100-XX

1.45-2.05:1 zoom 108-335102-XX

1.6-2.4:1 zoom 108-336103-XX

1.8-3.0:1 zoom 108-337104-XX

2.15-3.6:1 zoom 108-338105-XX

3.0-4.3:1 zoom 108-278101-XX

4.3-6.0:1 zoom 108-279101-XX

5.5-8.5:1 zoom 108-280101-XX

1.25-1.90:1 premium zoom 163-141107-XX

1.49-2.03:1 premium zoom 163-142108-XX

1.6-2.32:1 premium zoom 163-143109-XX

1.82-2.98:1 premium zoom 163-144100-XX

High contrast

1.25-1.83:1 zoom 152-117100-XX

1.45-2.05:1 zoom 152-118101-XX

1.6-2.4:1 zoom 152-119102-XX

1.8-3.0:1 zoom 152-120104-XX

2.15-3.6:1 zoom 108-404109-XX

1.25-1.90:1 premium zoom 152-155102-XX

1.49-2.03:1 premium zoom 152-156103-XX

1.6-2.32:1 premium zoom 152-157104-XX

1.82-2.98:1 premium zoom 152-158105-XX

CP2420-Xe and CP4220-Xe hazard distances

Introduction

CP2420-Xe and CP4420-Xe Installation and Setup Guide 9

020-103555-01 Rev. 1 (03-2022)

Hazard

distance

(m)

Throw ratio

A High brightness

B High contrast

Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or

black and white.

General hazards

Hazard warnings also apply to accessories once they are installed in a Christie product that is

connected to power.

Fire and Shock Hazard

To prevent fire or shock hazards, do not expose this product to rain or moisture.

Do not alter the power plug, overload the power outlet, or use it with extension cords.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to service the product.

Introduction

CP2420-Xe and CP4420-Xe Installation and Setup Guide 10

020-103555-01 Rev. 1 (03-2022)

Autres manuels pour CP2420-Xe

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Christie Projecteur

Christie

Christie CP2208-LP Manuel utilisateur

Christie

Christie M Series Manuel utilisateur

Christie

Christie boxer 4K30 Manuel utilisateur

Christie

Christie CP4230 Manuel utilisateur

Christie

Christie Roadster X9 Manuel utilisateur

Christie

Christie HS Series Manuel utilisateur

Christie

Christie LX505 Manuel utilisateur

Christie

Christie Roadie HD+35K Manuel utilisateur

Christie

Christie Mirage SST Manuel d'utilisation et d'entretien

Christie

Christie Mirage 4K35 Manuel utilisateur

Christie

Christie D Series Guide de l'utilisateur

Christie

Christie E Series Manuel utilisateur

Christie

Christie LW40U Manuel utilisateur

Christie

Christie Vivid LX35 Manuel utilisateur

Christie

Christie 103-011100-01 Manuel utilisateur

Christie

Christie 3308-VIV303-01 Manuel utilisateur

Christie

Christie D12HD-H Manuel utilisateur

Christie

Christie CineLife+ RGB PLF CP4450-RGB Instructions de montage

Christie

Christie DS30 Manuel utilisateur

Christie

Christie Boxer 4K Manuel d'utilisation et d'entretien

Christie

Christie DWU951 Manuel utilisateur

Christie

Christie DS Series Manuel utilisateur

Christie

Christie 38-VIV212 Manuel utilisateur

Christie

Christie VIVID 38-VIV205-01 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur