Chamberlain MC100 Manuel utilisateur

UNIVERSAL GARAGE DOOR MINI REMOTE CONTROL

The Universal Garage Door Mini Remote Control can be

programmed to activate up to two products, such as a garage

door opener, MyQ®light controls, gate operator, or commercial

door operator. Each button on the remote control works

independently of the other and must be programmed separately.

The images throughout this manual are for reference only and

your product may look different.

The Universal Garage Door Mini Remote Control can be

programmed to operate with different brands of garage door

openers. It is compatible with most garage door opener systems

manufactured by Chamberlain®, LiftMaster®, Sears Craftsman®,

Garage Master®, Genie®, Linear®, Stanley®, Overhead Door®,

Wayne Dalton®, Moore-O-Matic®, Do-It®, Master Mechanic®,

Raynor®, and True Value®.

MODEL MC100

To prevent possible SERIOUS INJURY or DEATH from a moving

gate or door:

• ALWAYS keep remote controls out of reach of children.

NEVER permit children to operate, or play with remote control

transmitters.

• Activate gate or door ONLY when it can be seen clearly, is

properly adjusted and there are no obstructions to door travel.

• ALWAYS keep gate or door in sight until completely closed.

NEVER permit anyone to cross path of moving gate or door.

*LiftMaster

®, Do-It

®, Master Mechanic

®, Raynor

®, True Value

®and

Sears Craftsman

®are compatible with Chamberlain technology.

**Visit www.chamberlain.com/MC100 for Genie®Intellicode II instructions.

Read instructions thoroughly BEFORE beginning.

If using the Universal Garage Door Mini Remote

Control with residential door openers, the remote

control must be used only with door openers

manufactured after 1993 that utilize photoelectric

sensors. The photoelectric sensors are always

located on or near the bottom of the door track.

STOP

Garage Door Opener

Brand

Type/Color of

Program/Learn button Year

Linear®Mega-Code '97-Current

Chamberlain®* Orange/Red '97-'03

Chamberlain®* Purple '05-Current

Chamberlain®* Green '93-'96

Genie®Overhead Door®Intellicode '95-Current

Genie®** Overhead Door®Intellicode '93-Current

Stanley®Secure Code '98

Chamberlain®* Yellow '11-Current

Wayne Dalton®Rolling Code '99

The Universal Garage Door Mini Remote Control is compatible

with the following brands, which use a program/learn button:

PROGRAMMING

Press and hold bottom button on the

remote control until the blue LED

stays solid (approximately 10

seconds) then release the button.

Start with your garage door closed.

Press and release the Program/LEARN button on your

garage door opener.

LED

TEST

Test the remote control by pressing the button you programmed

in step 4. If the garage door opener does not activate, repeat the

programming steps or visit www.chamberlain.com/MC100 for

additional instructions.

Program/

LEARN Button

When the garage door opener activates, immediately press

and release either of the buttons on the remote control to

confirm the code and exit programming.

On the remote control, press and release the button that

you would like to program twice. The blue LED will blink

and the remote control will begin sending the pre-

programmed codes to the garage door opener.

Transmission can take up to 45 seconds.

IMPORTANT: The remote will activate your door or gate during

programming. Ensure door is clear of ALL obstructions.

Bottom

Button

To prevent possible SERIOUS INJURY or DEATH:

• NEVER allow small children near batteries.

• If battery is swallowed, immediately notify doctor.

To reduce risk of fire, explosion or chemical burn:

• Replace ONLY with 3V CR2032 coin batteries.

• DO NOT recharge, disassemble, heat above 212°F (100°C)

or incinerate.

Dispose of batteries properly. Replace ONLY with

3V CR2032 coin batteries.

BATTERY

NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment

or modifications of this receiver and/or transmitter are prohibited, except

for changing the code setting or replacing the battery. THERE ARE

NO OTHER USER SERVICEABLE PARTS.

Tested to comply with FCC Standards FOR HOME OR OFFICE USE.

Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2)this device must accept any

interference received, including interference that may cause undesired operation.

Need Help?

Go to www.chamberlain.com/MC100

or call 1-800-442-1255

All trade names used herein are trademarks

of respective manufacturers listed.

114A4845

Battery

Screw

Autres manuels pour MC100

Table des matières

Autres manuels Chamberlain Télécommande

Chamberlain

Chamberlain LiftMaster Professional 312HM Manuel utilisateur

Chamberlain

Chamberlain LiftMaster Security+ 973LM Manuel utilisateur

Chamberlain

Chamberlain Security+ 953-315CB Manuel utilisateur

Chamberlain

Chamberlain 33LMC Manuel utilisateur

Chamberlain

Chamberlain LiftMaster 371LM Manuel utilisateur

Chamberlain

Chamberlain 811LMX Manuel utilisateur

Chamberlain

Chamberlain 956CB Manuel utilisateur

Chamberlain

Chamberlain 821LMC-S Manuel utilisateur

Chamberlain

Chamberlain POWER DRIVE 950CB Manuel utilisateur

Chamberlain

Chamberlain 950ESTD-P2 Manuel utilisateur

Chamberlain

Chamberlain Prosfessional Series Manuel utilisateur

Chamberlain

Chamberlain 61LMC Manuel utilisateur

Chamberlain

Chamberlain LiftMaster 973LM Manuel utilisateur

Chamberlain

Chamberlain PASSPORT CPT4 Manuel utilisateur

Chamberlain

Chamberlain 892LT Manuel utilisateur

Chamberlain

Chamberlain KLIK3U Manuel utilisateur

Chamberlain

Chamberlain 300MC Manuel utilisateur

Chamberlain

Chamberlain 375UT Manuel utilisateur

Chamberlain

Chamberlain LiftMaster Security+ 973-315LM Manuel utilisateur

Chamberlain

Chamberlain 956CD Manuel utilisateur

Chamberlain

Chamberlain 312HMC Manuel utilisateur

Chamberlain

Chamberlain PASSPORT CPTK3 Manuel utilisateur

Chamberlain

Chamberlain 84330AML Manuel utilisateur

Chamberlain

Chamberlain Power Drive Whisper Drive Security+ 953D Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation