core L2
Cache
Micron
process
700 700MHz 100 7.0 1.70V 256KB 0.18
750 750MHz 100 7.5 1.70V 256KB 0.18
800 800MHz 100 8.0 1.70V 256KB 0.18
850 850MHz 100 8.5 1.70V 256KB 0.18
900 900MHz 100 9.0 1.75V 256KB 0.18
950 950MHz 100 9.5 1.75V 256KB 0.18
1000 1000MHz 100 10.0 1.75V 256KB 0.18
1100 1100MHz 100 11.0 1.75V 256KB 0.18
1200 1200MHz 100 12.0 1.75V 256KB 0.18
1300 1300MHz 100 13.0 1.75V 256KB 0.18
1400 1400MHz 100 14.0 1.75V 256KB 0.18
1000 1000MHz 133 7.5 1.75V 256KB 0.18
1113 1113MHz 133 8.5 1.75V 256KB 0.18
1200 1200MHz 133 9.0 1.75V 256KB 0.18
1333 1333MHz 133 10.0 1.75V 256KB 0.18
1400 1400MHz 133 10.5 1.75V 256KB 0.18
AMD Athlon XP CPU (Palomino/Thunderbird)
Model CPU
Speed
FSB
Frequency Multiplier Vcore L2
Cache
Micron
process
1500+ 1333MHz 133 10.0 1.7V 256KB 0.18
1600+ 1400MHz 133 10.5 1.7V 256KB 0.18
1700+ 1466MHz 133 11.0 1.7/1.6V 256KB 0.18/0.13
1800+ 1533MHz 133 11.5 1.7/1.6V 256KB 0.18/0.13
1900+ 1600MHz 133 12.0 1.7/1.6V 256KB 0.18/0.13
2000+ 1666MHz 133 12.5 1.7/1.6V 256KB 0.18/0.13
2100+ 1733MHz 133 13.0 1.7/1.6V 256KB 0.18/0.13
2200+ 1800MHz 133 13.5 1.65V 256KB 0.13
2400+ 2000MHz 133 15.0 1.65V 256KB 0.13
2600+ 2133MHz 133 16.0 1.65V 256KB 0.13
Chapter 2
8
2-3 Main Memory Configuration
This motherboards provides 2 184pin Double Data Rate (DDR) Dual Inline Memory
Modules (DIMM) slots. Which supports PC 1600/DDR200 or PC2100/DDR266
DDR SDRAM modules up to 2GB. Install at least one DIMM module on the slots.
Memory modules can be installed on the slots in any order. You can install either
single- or double-sided modules to meet your own needs. The DDR SDRAM
memory system consists three banks and each bank can support up to 1GB memory
size. If you only use one bank it does not matter which one you use and if you use
two or more banks, it does not matter which bank you install first.
DRAM Specifications
DIMM type: 2.5V, unbuffered 64/128/256/512-bit DDR SDRAM.
Module size: Single/double-sided 64/128/256/512 Mbytes /1GB .
Parity: Ether parity or non-parity.
DIMM Module Combination
Install at least one DIMM module on the slots. You can install either single- or
double-sided modules in any order to meet your own needs. Memory modules can
be installed in any combination as follows:
Location 64 MB 128 MB 256 MB 512 MB 1.0 GB
DDR 1 X X X X X
DDR 2 X X X X X
To install your DDR Modules please follow the following steps:
1. Unlock a DIMM socket by pressing the retaining clips outward. The DDR
Modules has only one notch at the center of module. The DDR module will only
fit in the right position.
2. Insert the DDR Module vertically into the DIMM slot, with the correct alignment.
Then push it in until the golden finger on the memory module is deeply inserted
into the socket.
3. The plastic clip on each side of the DIMM slot will automatically close to hold the
DDR Modules in place.
