CDVI ievo IFACE Manuel utilisateur
ievo iface™Facial Recognition Terminal
IFACE™
EN
WARRANTY
YEAR
5
EN EN
2
IFACE™
ievo iface™ Facial Recognition Terminal
1] CONTENTS
2] INTRODUCTION 3
About this Manual 3
Conventions 3
3] PACKAGE CONTENTS 3
4] PRODUCT PRESENTATION 4
Technical Specications 4
Parts and Functions 5
Accessories 5
Terminals 6
Touch Screen 7
5] INSTALLATION 7
Installation Requirements 7-9
Installation Procedure 10
6] WIRING 11
Power Connection 11
Network Connection 12
Relay Connection 12-15
7] ENROLLMENT 15
8] AUTHENTICATION 16
9] ADVANCED SETTINGS - OSD MENU LIST 17
User 17
Device 17
Communication 18
Display 19
Authentication 19
Log 19
Title Page
EN EN
3
IFACE™
ievo iface™ Facial Recognition Terminal
2] INTRODUCTION
About this Manual
ifaceTM is an advanced face recognition terminal that provides highly accurate face
recognitioninanembeddedsystem.Thismanualcontainsthedescriptionsandoperational
instructions for ifaceTM device. It is intended and written for system administrators who
are in charge of overall operation including installation and management. We recommend
you familiarise yourself with this manual in order to make use of the product correctly
and effectively.
• The gures and screenshots in this guide are given for illustration purposes only
and may differ from the actual product.
• Due to continuous technological improvements, the guide may not contain the
most up-to-date information. For further information not covered in this guide,
Conventions
Symbol Name Description
WARNING Indicates information that should be followed with the utmost care.
Failure to comply with a warning could cause severe damage to the
equipment or injury to personnel.
CAUTION Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
IMPORTANT Emphasises essential information required for user success.
NOTE Provides important supplemental information that might enhance
users' understanding or alternative steps to accomplish their goals.
TIP Provides optional information to help users be more successful in
their tasks
3] PACKAGE CONTENTS
Main unit Mounting
plate Power cable Relay cable GPI cable Wiegand
cable RS-485
cable
1 1 1 1 1 1 1
AC adapter
(optional) Power cord
(optional) Diode Manual
1 1 1 1
EN EN
4
IFACE™
ievo iface™ Facial Recognition Terminal
4] PRODUCT PRESENTATION
Technical Specications
Feature Description
CPU ARM Cortex A53 OctaCore (8 core) operating at 1.4GHz
Memory 2GB RAM, 8GB Flash
Number of cameras Two
Display 5” LCD with touch
IR LED YES, for low ambient light levels and supplementary face detection
support
White LED YES, for adjunct lighting of face
Ethernet Standard 10/100 BaseT and GigE
Dimensions 100 x 200 x 36 mm
Weight 450 g (1 pound)
Capture range 40 cm to 200 cm
User’s height range 145 cm to 210 cm (with system installed at 135 cm)
Enrollment speed About 5 seconds
Recognition speed About 1 second total in 1:N mode with 20,000 subjects in local database
Enrollment 20,000 users total DB size (max 20,000 users in 1:N mode)
Fake face detection YES
Audio YES (Speaker only)
Input power 15Vdc
RF Card reader ISO/IEC 14443 reader for MIFARE®, DESFire®andFeliCa®cards(standard)
Connections RJ45 for LAN, Wiegand IN/OUT, GPIO (3), RS485, dry contact relay, SIM
Socket (optional)
USB Only for host / service modes and data back up.
Temperature Operating: 0°C to 45°C
Non-operating: -20°C to 60°C
Humidity Operating: 8% to 85% relative humidity, non-condensing
Non-operating: 8% to 90% relative humidity, non-condensing
71.5 mm
142 mm
105 mm
53 mm
22 mm
8 mm
60 mm
43 mm
38 mm
36 mm
200 mm
177 mm
100 mm
EN EN
5
IFACE™
ievo iface™ Facial Recognition Terminal
Parts and Functions
Item Description
Camera Captures the face images
IR LED Illuminates the face using the NIR lighting when capturing the faces
Touch screen Shows preview images before capture and provides a graphical interface
for enrollment and device conguration
White LED Gives supplemental light in dim light
RF card reader Indicates the area where RF cards can be read
Ambient light sensor Detects changes of light in the surrounding environment
Speaker Delivers sound from the device
Mounting plate socket Attaches the unit the mounting plate
USB port Connects a USB ash drive for back up and restoration of face database
Accessories
Item Description
Mounting bracket
RF card writer Dual RF card reader/writer
RF card MIFARE®, DESFire®, FeliCa®
EN EN
6
IFACE™
ievo iface™ Facial Recognition Terminal
Item Description
Tripod socket (not supplied) Attaches a tripod (or equivalent mount) with a standard 1/4-20 UNC
screw
Tamper switch Starts an alarm, if congured, when a physical tampering attempt is
detected (see p.18 for more information)
SIM card slot (optional) Indicates area where a SIM card can be connected
Removable tabs Allows for routing of power, Ethernet and other cables to go through the
openings on the side of the unit, rather than the back, when tabs are
removed. (e.g. useful in tabletop deployments)
Ethernet port Connects an ethernet cable
Power plug Connects the power cable to the unit
Factory reset button Restores the device to its original manufacturer settings
RS-485 termination switch Provides termination when the device is located at the physical end of
RS-485 wiring
RS-485 Connects the RS-485 cable
Wiegand input or output Connects the Wiegand cable either as input or as output selectively
GPI input Connects the GPI cable
Terminals
Tripod socket
Tamper swtich
SIM card slot (optional)
SIM card slot (optional)
Removable tabs x3
EN EN
7
IFACE™
ievo iface™ Facial Recognition Terminal
Touch Screen
No. Item Description
1 Status indicator Shows the status of network connection and third party application
• White: Online
• Red: Ofine, not usable
2 Settings button Enters the device setup menu screen
3 Enrollment button Enters the device setup menu screen
4 Preview screen Gives a preview of subject’s face
5 Home button Goes to the home screen
6 Back button Goes back to the previous menu screen
7 Settings Shows settings menu – User, Device, Communication, Display,
Authentication, Log
5] INSTALLATION
This chapter gives the information about the requirements and the prerequisites for
installing ifaceTM and the installation procedures.
Installation Requirements
Before installation, make sure that the following requirements are met.
If it is required to use the device in outdoor or extreme environments:
• Avoid locations that are exposed to backlighting, direct sunlight, or other strong
illumination.
• Choose a location with moderate ambient light.
The ifaceTM is designed and intended for indoor use only. The device is not
weatherproof and must not be exposed to water, ice, extreme temperatures or
other adverse weather conditions.
A CDVI Group Brand
EN EN
8
IFACE™
ievo iface™ Facial Recognition Terminal
Cable Requirements
• Use a stable power supply adapter of 15Vdc (± 5%) with a minimum 2A.
• Make sure that the power cable is as short as possible and that you have correct wire
gauge (22 AWG or smaller in number)
• Use CAT5 or later for the ethernet cable.
Input
Voltage
(V)
Wire gauge
(AWG)
Power cable length (m)
Recommended Max
12
16 26.3 37.9
18 15.9 23.8
20 10.0 15.0
22 6.3 9.4
15 20 25.0 37.5
22 15.7 23.6
24 20 70.1 105.1
22 44.0 66.0
• Determine the height at which you install the device;
The recommended mounting height is 135 cm (53 inches) from the oor to the
bottom of the device. This covers a person’s height from 140 cm (55 inches) up
to 190 cm (75 inches) at a distance of 55 cm (22 inches) from the device.
EN EN
9
IFACE™
ievo iface™ Facial Recognition Terminal
Tool Requirements
The following tools can be necessary for installation and are not supplied by default.
Purpose Name Tool Note
General
Concrete
wall mount
Screw driver Cross head
Tape ruler For measuring
the installation
height
Cutting plier
Electric drill With a drill bit
and anchor
bolts
Marker
Hammer
EN EN
10
IFACE™
ievo iface™ Facial Recognition Terminal
Installation Procedure
Wall mount
You can install the device onto a wall directly by using the mounting plate.
1. Remove the screw that attaches ifaceTM to
the mounting plate and disassemble the
plate.
Keep the screw because it will be used to
attach them together again. For concrete walls, follow these steps:
1. Put marks on the wall through the plate’s
screw holes by using a marker.
2. Drill the marked points by using an
electric drill.
3. Attach the anchor bolts to the holes by
using a hammer.
4. Attach the plate to the wall with the
screws.
1. Put the mounting plate at the pre-
determined position and attach the plate
onto the wall with the screws (M4 x 8 min).
2.
1. Connect the power cable and peripheral
cables, if necessary, to the connectors in
the rear panel. (See Connecting Cables for
more information)
3. 1. Note: Step to be included only for conduit
mounting.
4.
1. Put the device onto the installed plate,
slide it downward, and attach it with the
screw (M3 x 6)
5.
Wall mounting points
Remove one or more plastic tabs to allow
the wire routing and let the cables go
through the openings.
Table des matières
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
