CBC ZN-MDI243M-IR Manuel d'instructions

Quick User Guide ZN-MDI243M-IR Network Camera

Ver1.00 EN

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet,

power off immediately.

-Do not place the Network camera near heat sources, such as a television or

oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to “User’s manual”.

1. Check Contents

No.

Item

Description

Network Camera

ZN-MDI243M-IR

Software CD

User’s Manual, Utility software

Quick User Guide

This document

Accessories

Template for installation

Video monitor cable

Tapping Screw M4x30 : 2pcs

Anchor : 2pcs

2. Physical Description

Quick User Guide ZN-MDI243M-IR Network Camera

Ver1.00 EN

1. Control Button

-Change Video output format NTSC/PAL. (toggle)

-Factory Default (Keep hold more than 10 seconds)

2. Status LED

3. Reset Button

4. Video output for service monitor

5. Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the PoE HUB.

The camera support PoE only.

4. Assign IP address

The default setting of the camera is set to “DHCP”and “UPnP”function

is set to ON. If you have a DHCP server on your network and UPnP

function is enabled on your PC you can find the network camera in

“My network”.

If a DHCP server is not available on your network, please assign IP

address by the following process. Default IP address will be shown as

255.255.255.255.

Execute MultiUpgradeTool.exe. It will search cameras on the network

automatically.

①

③

②

Quick User Guide ZN-MDI243M-IR Network Camera

Ver1.00 EN

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click “Change IP address”button to apply settings to the camera.

When double click the camera in the list, the default web browser

(Internet Explorer or compatible equivalent) will open and automatically

connect to the camera.

5. Web browser connection

Note : The Network camera supports Internet Explorer 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN”and “1234”.

Please type in the user ID and password to connect the network camera.

For further information for setup, please refer to User’s manual

in software CD.

Table des matières

Autres manuels CBC Caméra de sécurité

CBC

CBC ZC-PT212 Manuel utilisateur

CBC

CBC PT127N-XT Manuel utilisateur

CBC

CBC ZN-DT Series Manuel d'instructions

CBC

CBC ZN-MDI2 M-IR Series Manuel d'instructions

CBC

CBC C-IR0409-40 Series Manuel utilisateur

CBC

CBC PT127N-XT Manuel utilisateur

CBC

CBC CL-301 Manuel utilisateur

CBC

CBC GANZ Z8-VD2V-2 Manuel utilisateur

CBC

CBC CX Series Manuel utilisateur

CBC

CBC ZN-MB2 Series Manuel d'instructions

CBC

CBC PT127N Manuel utilisateur

CBC

CBC Ganz ZC-NH406P Manuel utilisateur

CBC

CBC ZN-B2MTP Manuel d'instructions

CBC

CBC Megapixel Camera Manuel utilisateur

CBC

CBC PT112N Manuel utilisateur

CBC

CBC LC703 Manuel utilisateur

CBC

CBC ZN-M2AF Manuel d'instructions

CBC

CBC PT118XT-HD Manuel utilisateur

CBC

CBC ZN-C Series Manuel d'instructions

CBC

CBC AFZC-22X Manuel utilisateur

CBC

CBC ZC-F10C1 Manuel utilisateur

CBC

CBC CMC Series Manuel utilisateur

CBC

CBC PT110-IP Manuel utilisateur

CBC

CBC GANZ ZC-NH406PE Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur