Casio XJ-L8300HN Manuel utilisateur

Projector Wired LAN

Version 3.0

Keep this manual in a safe place future reference.

•PJLink trademark and logo are trademarks applied for registration or are already

registered in Japan, the United tates of America and other countries and areas.

•Crestron Connected is a registered trademark of Crestron Electronics, Inc. of the United

tates.

•AMX is a registered trademark of AMX LLC of the United tates.

•HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

•Other company and product names may be registered product names or trademarks of

their respective owners.

•The contents of this manual are subject to change without notice.

•This manual is published under strict quality control standards. hould you notice any

errors or other problems, please feel free to contact us about them.

•Copying of this manual, either in part or its entirety is forbidden. You are allowed to use

these instructions for your own personal use. Any other use is forbidden without the

permission of CA IO COMPUTER CO., LTD.

•CA IO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims

from third parties arising out of the use of this product or this manual.

•CA IO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to

loss of data due to malfunction or maintenance of this product, or due to any other

reason.

•The sample screens shown in this manual are for illustrative purposes only, and may

not be exactly the same as the screens actually produced by the product.

•Unless specifically stated otherwise, all illustrations in this manual show the

XJ-L8300HN projector.

XJ-L8300HN projector (hereinafter referred to collectively as "the Projector" or "this Projector") can

be controlled from an external device via its LAN port.

Connection

Use a LAN cable to connect the Projector to a network device with which you want to establish a

wired LAN connection.

・ Direct connection between the Projector and a network device

For the above type of connection, use a cross type LAN cable.

・ Connection between the Projector and a network device via a router

・

Supported Devices and Standards

Web Browser

This Projector supports control using a computer web browser.

For details about connection, see "Controlling the projector remotely" in your Projector's User's

Guide.

PJLink

This Projector supports the PJLink Class1 standard formulated by the Japan Business Machine

and Information ystem Industries Association (JBMIA).

For detailed information about PJLink, visit the website below.

URL: http://pjlink.jbmia.or.jp/english

•The following shows input switching instruction and input switching query parameters and

their corresponding input sources.

Parameter

Input ource

11 Computer 1

31 HDMI1

32 HDMI2

51 HDBaseT

•The cover open error and filter error are not supported by the error state query.

•A projector name query returns CA IO.

•A manufacturer name query returns CA IO.

•A device name query returns XJ-L8300HN.

•The password used for the connection authentication process is admin. It is not possible to

change the password or disable the authentication.

For information about the functions of other commands, see the PJLink specifications issued by

JBMIA.

Crestron

This Projector supports Crestron Electronics controller and software (RoomView®) commands.

For detailed information and information about downloading RoomView®, visit the website below.

URL http://www.crestron.com/microsites/get-roomview

When using the Crestron controller, the controller IP address and other settings must be configured

on the Projector. Enter the IP address of this projector in a URL field of a web browser and click

[Tools] on the displayed page to open the Tools page. You can configure the necessary settings at this

page.

•IP address pecifies the controller IP address.

•IP ID pecifies the controller IP ID.

•Port pecifies the number of the port being used. (Always 41794)

Enter the applicable information for each item and then click the [ end] button. This will restart

the network function and apply the new settings.

AMX

This Projector supports the AMX controller and Device Discovery. Commands used for control are

PJLink standard commands.

For detailed information, visit the website below.

URL: http://www.amx.com/

Caution

•The Projector can be configured to enable or disable power-on via wired LAN during the

standby state. To do so, use [Network tandby] of the Projector's etup Menu.

Enable Network tandby Mode: When this setting is set to "On", the network standby

function is enabled and you can power on the projector via wired LAN. However, when the

time set in "Auto Disable Network tandby Mode" below has elapsed after entering the

standby state, the network standby function will be invalid. In that case, turn on the power

with the remote control or the projector unit key.

Auto Disable Network tandby Mode：et a period of time from when the projector enters

the standby state until when the network standby function becomes invalid.

NGN170710E-B

Autres manuels pour XJ-L8300HN

Table des matières

Autres manuels Casio Projecteur

Casio

Casio XJ-S35 - XGA DLP Projector Manuel d'instructions et de sécurité

Casio

Casio XJ-S33 series Manuel utilisateur

Casio

Casio XJ-V1 Manuel utilisateur

Casio

Casio XJ-M145 Manuel d'instructions et de sécurité

Casio

Casio XJ-A147 Manuel utilisateur

Casio

Casio CX-E1 Manuel utilisateur

Casio

Casio XJ-S31 - XGA DLP Projector Manuel utilisateur

Casio

Casio XJ-H1700 Manuel utilisateur

Casio

Casio PRO LINE XJ-H2650 Manuel utilisateur

Casio

Casio XJ-H1750 Manuel d'instructions et de sécurité

Casio

Casio XJ-UT Series Manuel utilisateur

Casio

Casio XJ-UT331X Manuel utilisateur

Casio

Casio XJ-A145V SERIES Manuel utilisateur

Casio

Casio XJ-S42/XJ-S47 Manuel utilisateur

Casio

Casio XJ-A235V SERIES Manuel d'instructions et de sécurité

Casio

Casio XJ-SK600 Manuel utilisateur

Casio

Casio XJ-M255 Manuel d'instructions et de sécurité

Casio

Casio XJ-A130V SERIES Manuel utilisateur

Casio

Casio XJ-A130V SERIES Manuel utilisateur

Casio

Casio XJ-UT311WN SERIES Manuel de la liste des pièces

Casio

Casio XJ-M145 Instructions d'installation et d'entretien

Casio

Casio XJ-S33 series Manuel utilisateur

Casio

Casio XJ-A230 Manuel utilisateur

Casio

Casio XJ-A130V/XJ-A135V* Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur