Car-Interface CI-RL3-SC15 Manuel utilisateur

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

r.LiNK Video inserter

CI-RL3-SC15

Compatible with Volvo vehicles with

Sensus Connect infotainment

and 8.7inch touch-monitor

Video-inserter for rear-view camera

and two more video inputs

Product features

Video-inserter for factory-infotainment systems

1 CVBS Input for rear-view camera

2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T Tuner)

Automatic switching to rear-view camera input on engagement of the reverse gear

Video-in-motion (ONLY for connected video-sources)

Video-inputs NTSC compatible

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors –video interface

1.4. Settings of the 8 Dip switches (black)

1.4.1. Enabling the interface’s video inputs (dip 2-3)

1.4.2. Rear-view camera setting (dip 5)

1.5. Settings of the 4 Dip switches (CAN function –red)

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connection - picture signal cable

2.4. Connection –10pin Power / CAN cable

2.5. Analog power supply for the video interface

2.6. Connection - video-sources

2.6.1. Audio insertion

2.6.2. After-market rear-view camera

2.6.2.1. Case 1: Interface receives the reverse gear signal

2.6.2.2. Case 2: Interface does not receive the reverse gear signal

2.7. Connection - video-interface and external keypad

2.8. Picture settings

3. Interface operation

3.1. By factory infotainment button

3.2. By external keypad

4. Specifications

5. FAQ –Trouble Shooting-Interface functions

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

video interface’s place of installation must be free of moisture and away from heat sources.

Before the final installation in the vehicle of the video sources, we recommend a test-run

to ensure the compatibility of vehicle and interface. Due to changes in the production of

the vehicle manufacturer there’s always a possibility of incompatibility.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page4

Compatibility

Brand

Compatible vehicles

Compatible systems

Volvo

S60 from model year 2020,

S90 from model year 2017,

V60 from model year 2016,

V90 from model year 2016,

XC40 from model year 2019,

XC60 from model year 2018,

XC90 from model year 2015

Sensus Connect with 8,7”

monitor

Limitations

Video only The interface inserts ONLY video signals into the infotainment.

For inserting Audio signals either the possibly existing factory

audio-AUX-input or a FM-modulator can be used. If 2 audio

sources shall be connected to the infotainment, an additional

electronic is necessary to switch them.

Video sources NTSC video sources compatible only.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-

view camera is only possible while the reverse gear is engaged.

To delay the switch-back an additional electronic part is required.

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors –video interface

The video-interface converts the connected after-market sources video signals into a LVDS

signal which is inserted in the factory monitor using separate trigger options. Further it reads

the vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video

interface.

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page5

1.4. Settings of the 8 Dip switches (black)

Some settings have to be selected by the dip-switches on the

video interface. Dip position down is ON and position up is OFF.

See the following chapters for detailed information.

1.4.1. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed by switching through the interface’s video

sources. It is recommended to enable only the required inputs. So the disabled inputs will be

skipped while switching through the video interfaces inputs.

1.4.2. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera or factory optical park system picture.

If set to ON, the interface switches to its rear-view camera input while the reverse gear is

engaged.

Note: Dips 1, 4, 6, 7 und 8 are out of function and have to be set to OFF!

1.5. Settings of the 4 Dip switches (CAN functions –red)

All 4 dip-switches of the video interface have no function for normal

use and have to be set to OFF.

Dip position down is ON and position up is OFF.

Vehicle/Navigation

Dip 1

Dip 2

Dip 3

Dip 4

Volvo XC90

OFF

After each Dip-switch-change a power-reset of the Can-box has to be performed!

Dip

Function

ON (down)

OFF (up)

No function

Set to OFF

CVBS Video 1-input

enabled

disabled

CVBS Video 2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

No function

set to OFF

No function

set to OFF

No function

set to OFF

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page6

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

2.1. Place of installation

The interface is supposed to be installed at a suitable location behind the factory monitor.

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page7

2.2. Connection schema

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page8

2.3. Connection –picture signal cable

Remove the head unit

Disconnect the factory picture signal cable’s blue coloured female HSD connector from the

monitor’s rear-side and connect it to the purple coloured HSD connector of the enclosed

picture signal cable.

Connect the waterblue coloured female HSD connector of the enclosed picture signal cable

to the monitor’s previously become free blue coloured male HSD connector.

Connect the opposite female waterblue coloured HSD+2 connector of the picture signal

cable to the waterblue coloured male HSD+2 connector of the video interface.

Note: The colours of the HSD connector of head unit and factory harness may vary.

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page9

2.4. Connection –10pin Power / CAN cable

Connect the 10pin power / CAN cable’s female 10pin connector

to the 10pin connector of the video interface.

Connect the single grey wire of the 10pin power / CAN cable

to the vehicle’s CAN-Low.

Connect the blue wire of the 10pin Power / CAN Cable

to the vehicle’s CAN-High.

Note: To handle the CAN+ and the CAN- connection, the enclosed

20pin OBD connector can alternatively be used,but a

perfect connection from behind without that connector

will avoid loose problems and dysfunction.

Connect the single brown wire of the 10pin Power / CAN Cable to vehicle’s negative

ground.

Connect the single red wire of the 10pin power/CAN cable to +12V ACC power supply.

Note: The CAN communication doesn’t succeed in all vehicles. If, after connecting the 10pin

Power / CAN cable, no interface LED lightens up while the ignition is turned on, refer to

chapter “Analogue power supply for the video interface”.

Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15

Page10

2.5. Analog power supply for the video interface

Connect the red wire ACC-OUT and the purple coloured wire Manual ACC of the

12pin interface cable to +12V ACC power supply.

Table des matières

Autres manuels Car-Interface Accessoires automobiles

Car-Interface

Car-Interface CI-RL4-R40 Manuel utilisateur

Car-Interface

Car-Interface CI-C2-MK-AUX Manuel utilisateur

Car-Interface

Car-Interface CI-RL3-C3D Manuel utilisateur

Car-Interface

Car-Interface v.LiNK CI-VL2-LR14-OPS Manuel utilisateur

Car-Interface

Car-Interface CI-UCON5-JEEP Manuel utilisateur

Car-Interface

Car-Interface CI-DAB-CAN1-SK Manuel utilisateur

Car-Interface

Car-Interface TV-Free CI-TF-C20 Manuel utilisateur

Car-Interface

Car-Interface CI-RL3-MIB-TT Manuel utilisateur

Car-Interface

Car-Interface CI-RL4-UCON8-LV Manuel utilisateur

Car-Interface

Car-Interface CI-VL7-SY2 Manuel utilisateur

Car-Interface

Car-Interface CI-RL4-MBN6 Manuel utilisateur

Car-Interface

Car-Interface CI-RL4-NAC12 Manuel utilisateur

Car-Interface

Car-Interface CI-AUX-110 Manuel utilisateur

Car-Interface

Car-Interface CI-VL3-MBN51 Manuel utilisateur

Car-Interface

Car-Interface TV-Free CI-TF-FSYNC54 Manuel utilisateur

Car-Interface

Car-Interface CI-VL2-124SPY Manuel utilisateur

Car-Interface

Car-Interface CI-RL4-R40-E Manuel utilisateur

Car-Interface

Car-Interface TV-Free TF-NTG1 Manuel utilisateur

Car-Interface

Car-Interface CI-VL2-MIB-3 Manuel utilisateur

Car-Interface

Car-Interface CI-RL4-UCON12 Manuel utilisateur

Car-Interface

Car-Interface v.LOGiC V5-CIC-F-PNP Manuel utilisateur

Car-Interface

Car-Interface CI-RL2-MTC Manuel utilisateur

Car-Interface

Car-Interface RL4-MBN6 Manuel utilisateur

Car-Interface

Car-Interface CI-VL2-CCC Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur