Canyon SW82 Manuel utilisateur
QUICK GUIDE V 2
SW82
Smartwatch
GPS sport smartwatch
«Wasabi»
1. Touch Screen
2. Power key
3. Shortcut key for sport mode
4. Charging pins
5. Heart rate sensor
1. OVERVIEW
2. USAGE
Make sure that your smartwatch is fully charged
before using. If you use a Power Adaptor (Not
EN
12 4
5
3
included), Power Adaptor voltage limit is: 5V, 1A. It
takes up to 2 hours to be fully charged.
1. Make sure the charging pins on the charging cable
t correctly onto the charging terminals on the back
of the smartwatch.
2. Plug the big end of the USB-cable to a power
source.
For better charging compatibility, it is advisable to
use a Power Bank or wall charger produced by
Canyon. Do not use a fast charging device as it could
result in a short circuit and risk of re.
Connecting to a smartphone: charge the
smartwatch, turn it on, activate Bluetooth on your
smartphone, download and install Canyon Smart
Watch Application Canyon Life by scanning the QR
code below. Open Canyon Life app-> “Bluetooth
Devices”->”Start”-> choose on your watch from the
Pair Device list >(SW82) -> press ”ADD DEVICE”
and you will see Device successfully connected. Use
the application to apply the settings you need, for
example you can: turn on sedentary reminder, select
apps that you want to receive notications from, etc.
Unpair Smartwatch from mobile phone:
1. Open “Canyon Life” on your smartphone
2. Open “Setup”, select “Bluetooth Devices”
EN
EN
3. Tap “Unpair device”.
3. HOW TO USE
• Turn on/off: Press and hold the power button for
3 seconds
• Go to main menu: Swipe from right to left on watch
face interface
• Switch main menu: Swipe from right to left
• Select item: Tap the icon
• Return to watch face interface: Short press the
power button on any interfaces
• Return to previous page: Swipe from left to right
• Sport mode shortcuts: Press the shortcut key
• Check notications: Swipe from left to right on
watch face interface
Swipe left
and right
Slide up
and down
Click Press
EN
4. MAIN MENU
After switch on the smartwatch, you will see the
watch face interface. From watch face:
EN
Acquiring Satellite Signals. The
device may need a clear view of the
sky to acquire satellite signals. Go
outdoors to nd an open area. The
front of the device should be oriented
toward the sky. You should stand
away from buildings.
Improving GPS Satellite Reception
a. Smartwatch will automatically locate GPS
(if you connect to the Canyon Life app, it will
synchronize with AGPS positioning to make your
positioning faster).
b. Take your device outside to an open area away
from tall buildings and trees.
c. Remain stationary for a few minutes.
GPS location
5. FUNCTIONS
1. Go to Main Menu
a. Slide from right to left to enter the main menu
b. Slide from left to right to enter into the
notication page
c. Swipe up and down to enter into the other
shortcuts pages
EN
You can press and hold on the main screen to
change the watch face theme.
GPS is located successfully.
You can skip GPS loading.
When the GPS icon is ashing, it
indicates that the GPS is loading.
When the icon turns green and does
not ash, it indicates that the GPS
has been successfully located.
Watch face
Main menu
EN
Pedometer
Status interface
Swipe from right to left on the dialing interface to
enter the main menu. Please click an icon to select
the appropriate feature.
The Smartwatch will record your daily activity
automatically. After sync with the Canyon Life App,
In this interface, you can see the Bluetooth
connection status, battery level, Do Not Disturb mode
and adjust the brightness of the watch screen, as
well as quickly enter the settings page.
EN
Heart rate
you can check the number of steps data, calories
and distance traveled on your smartphone.
Click the icon to enter the heart rate monitoring
interface. You can start testing your heart rate when
smartwatch is in contact with your arm. Slide left to
right to exit the heart rate monitor. After sync with the
Canyon Life App, you can check your heart rate data
on your smartphone.
Multi-Sport
Click on the sports icon to enter the training interface.
There are six sports modes: walking outdoors,
EN
In the walking outdoors and climbing interface, the
watch will display the steps, time, calories, distance
and heart rate data.
In the running outdoors, indoor running and outdoor
cycling interface, the watch will display the speed,
running outdoors, indoor running, outdoor cycling,
climbing and swimming. You can select the desired
mode start the selected exercise; the smartwatch
will record exercise data. You can start the exercise
directly or click an icon to set the desired goal
(distance, calories, time, or free style)
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Canyon Montre
Canyon
Canyon Badian CNS-SW68 Manuel utilisateur
Canyon
Canyon CNS-SW51BB Manuel utilisateur
Canyon
Canyon Black Salt Manuel utilisateur
Canyon
Canyon Oregano Manuel utilisateur
Canyon
Canyon Polly Manuel utilisateur
Canyon
Canyon Sandy CNE-KW34PP Manuel utilisateur
Canyon
Canyon Jondy CNE-KW44 Series Manuel utilisateur
Canyon
Canyon CNS-SB41 BG Manuel utilisateur
Canyon
Canyon Marzipan Manuel utilisateur
Canyon
Canyon OTTO SW-86 Manuel utilisateur
Canyon
Canyon Semifreddo SW-61 Manuel utilisateur
Canyon
Canyon SW-79 Manuel utilisateur
Canyon
Canyon Lollypop SW-63 Manuel utilisateur
Canyon
Canyon SW-78 Manuel utilisateur
Canyon
Canyon Sammy CNE-KW21 Manuel utilisateur
Canyon
Canyon My Dino KW-33 Manuel utilisateur
Canyon
Canyon CNS-SW72BB Manuel utilisateur
Canyon
Canyon CNS-SW71 Manuel utilisateur
Canyon
Canyon SB-12 Manuel utilisateur
Canyon
Canyon CNS-SW7 Manuel utilisateur
