Canon Super Glider Manuel utilisateur

Super Glider

This model is a glider with a simple design.

A glider is an airplane without an engine. It

must skillfully use uprising air currents to

keep it flying.

You can adjust this glider so that it flies very

well.

1. Build the WINGS

3. Put it together

Glue together.

Cut away the gray areas around

the FUSELAGE and bend the tabs outward.

Apply glue to the inside surfaces

of the FUSELAGE and glue the two

pieces together,

starting at the tail and working

your way forward to the nose.

Curve the WING, so that the highest spot on the WING

is a point one-third of the way from the front edge

of the WING, when viewed from the side.

Bend the left and right sides

of the WING upward

from the center line, about 15%.

The black lines indicate

one-third of the way

from the front edge of the WING. Curve the WING so the

center is raised about

1 mm (1/25 inch).

15˚ 15˚

WING (Underside)

FUSELAGE (Right)

FUSELAGE (Left)

1/3

Front

edge Back edge

Left Right

WING, viewed

from the side.

WING, viewed

from the front.

2. Build the FUSELAGE

Glue the WINGS and TAIL in place.

Attach two paper clips.

WING

TAIL

FUSELAGE

Paper clips

Using the triangles on the

WINGS as guides, align the center

of the WING with the FUSELAGE

and glue it down.

front

rear

gluetofuselage.

Apply glue and

fasten together.

(If you want to fly the glider outside, print these patterns

on white construction paper for inkjet.)

Directions

*Cut out the card above and save it. You can collect the cards from each of the Papercraft

projects to make your own mini-book!

Canon Papercraft Mini-book

Toy Series

Papercraft Toy Series Super Glider (section 1) Canon is a registered trademark of Canon Inc.

Front

Rear

Glue to FUSELAGE.

Front

Glue to

FUSELAGE.

Glue to

FUSELAGE.

WING

TAIL

Toy Series Super Glider

Don’t throw at people!

Don’t play in the street!

15˚ 15˚

Adjusting the tail:

If the plane dives too much, curve the trailing edge of the

tail upward (blue area).If the plane climbs too much,

curve the trailing edge of the tail downward (red area).

Curve this portion

of the tail.

WING angle:

(viewed from the front of the glider.)

Bend the WINGS upward 15 degrees. Bend the WINGS upward 15 degrees.

The tail should be level.

Papercraft Toy Series Super Glider (section 2)

URL: http://bj.canon.co.jp/english/3D-papercraft/

Canon 3D Papercraft

Canon is a registered trademark of Canon Inc.

Fold in two and glue together.

Fold the tabs outward.

Cut away the gray area.

FUSELAGE

(Right) FUSELAGE

(Left)

Papercraft Toy Series Super Glider (section 3)

mountain foldMountain fold

Canon is a registered trademark of Canon Inc.

Autres manuels Canon Jouet

Canon

Canon CREATIVE PARK (Moving) Clowns spinning... Manuel utilisateur

Canon

Canon PaperCraft Halloween/Witch's Hat Manuel utilisateur

Canon

Canon Creative Park Moving Clown in a barrel Manuel utilisateur

Canon

Canon Creative Park Performing white horses Manuel utilisateur

Canon

Canon CREATIVE PARK Shoebill Manuel utilisateur

Canon

Canon PAPER CRAFT Euoplocephalus Manuel utilisateur

Canon

Canon Lunar Globe Manuel utilisateur

Canon

Canon CREATIVE PARK Bird Cage Canary Manuel utilisateur

Canon

Canon Creative Park Budgerigar Manuel utilisateur

Canon

Canon CREATIVE PARK French Bulldog Manuel utilisateur

Canon

Canon Creative Park Caribbean flamingo Guide de démarrage rapide

Canon

Canon Supersaurus Manuel utilisateur

Canon

Canon CREATIVE PARK Zebra Manuel utilisateur

Canon

Canon CREATIVE PARK Temple of the Emerald, Thai Manuel utilisateur

Canon

Canon Sidewheeler Guide de configuration

Canon

Canon Creative Park Pop-up Card Halloween/Black cat &... Manuel utilisateur

Canon

Canon Creative Park Elastic-powered Duck Manuel utilisateur

Canon

Canon Paper Craft Snowy owl (Female) Manuel utilisateur

Canon

Canon CREATIVE PARK (Moving) Clowns out of a... Manuel utilisateur

Canon

Canon CREATIVE PARK Sea lion Manuel utilisateur

Canon

Canon Creative Park Pop-up Card Christmas House Manuel utilisateur

Canon

Canon Creative Park Raccoon Manuel utilisateur

Canon

Canon Paper Craft Sydney Opera House(Australia) Manuel utilisateur

Canon

Canon CREATIVE PARK Pop-up card (Swings) Manuel utilisateur

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur

Mattel

Mattel HOTWHEELS DWL04 Manuel utilisateur