Canon ImageFormula DR-7080C Manuel utilisateur

CANON Customer Service Centers

©CANON ELECTRONICS INC. 2004 PRINTED IN JAPANPUB.CE-CE-313 0204AB00

SCANNING BASICS

USEFUL FEATURES

TROUBLESHOOTING

QUICK REFERENCE

UNIVERSAL DOCUMENT SCANNER

PRECAUTIONS

The DR-7080C is a universal scanner that offers high-speed scanning in black and

white, grayscale, and color. To ensure optimum performance, please follow the

recommendations below.

●Make sure that your documents are within the acceptable scanning sizes.

Width: 5.5 to 12 inches (139.7 to 304.8 mm)

Length: 5 to 17 inches (128 to 432 mm)

Long Document Mode: document length can be up to 24 inches (630 mm)

Long Document Mode/Color 600 dpi Mode: length up to 21 inches (540 mm)

Document thickness:

Black and white documents: 0.06 to 0.15 mm (Simplex), 0.07 to 0.15 mm (Duplex)

Mixed batches (black and white, color documents): 0.07 to 0.15 mm

Color documents: 0.08 to 0.15 mm

Document weight:

Black and white documents (Simplex): 11 to 32 lb. bond (42 to 128 g/m2)

Black and white documents (Duplex): 13 to 32 lb. bond (50 to 128 g/m2)

Mixed batches (black and white, color documents): 13 to 32 lb. bond (50 to 128 g/m2)

Color documents: 17 to 32 lb. bond (64 to 128 g/m2)

●Turn on the Long Document Mode to scan long documents. (See p.9)

●If there is any wet ink or paste on the document, wait until the ink or paste has thoroughly

dried before scanning the document.

●Always clean the scanning rollers after scanning a document that has pencil writing on it.

●If you scan thin paper in Duplex mode, the ink printed on the back side may appear in your

image data. Adjust scanning density to avoid this.

●Scanning documents with a rough surface may cause a paper jam. To avoid this, select

[Flatbed] and scan the documents one page at a time.

●When you scan a batch of NCR documents, make sure they are not stuck together. If a

jam occurs, select [Flatbed] and scan the documents one page at a time.

Refer to Chapter 4.1 of the DR-7080C Instructions manual for further details on acceptable document types.

■ DOCUMENT TYPES TO AVOID

Feeding such documents may result in paper jams, damage to documents, or scanner malfunction. To scan these

documents, use the flatbed (platen glass) instead.

Wrinkled or

creased paper

Curled paper

Torn paper

Paper with clips

or staples

Carbon-backed paper

Coated paper or fax

recording paper

Onion skin or

other thin paper

Paper with binding

holes

SCANNING BASICS

GETTING STARTED

This section explains the basic steps involved in scanning a

document. Batches are assumed to contain papers all of the same

size and thickness. When turning ON the power, be sure to turn ON

the scanner before you turn ON the connected computer.

The purpose of this Quick Reference is to provide a

concise overview of the DR-7080C. It is designed to

supplement—not replace—the Instructions manual

included with the scanner. Please review the DR-

7080C Instructions manual for key information on

safety precautions, installation procedures, and

maintenance guidelines.

▲

Load Limitation Mark

Do not exceed this mark.

Overloading the feeder may

cause jamming.

FEEDER To prepare the feeder for scanning, adjust the slide guides to the

appropriate document size. Also, align the edges of your documents

to ensure smooth feeding. Documents are loaded into the feeder with

the scanning side face up.

If you are scanning large-sized NCR paper or thin paper, place some paper in the

document eject tray before scanning. For details, refer to Chapter 4.2 of the DR-7080C

Instructions manual.

▲

Slide Guides

FLATBED

▲

■ How to use the flatbed

First, raise the feeder. Documents are to be placed on the platen glass

with the scanning side face down. The corner of the document should be

aligned with the upper left corner of the platen glass. When you lower the

feeder, do this slowly and carefully.

■ Scanning a book or thick document

When scanning thick documents or books, either leave the feeder raised

or operate the feeder as shown below.

A. Raise the feeder. While pressing on the bottom of the feeder (1), pull

the feeder down and forward (2).

B. Set the thick document or book on the platen glass and hold the feeder

lightly while scanning.

C. To return the feeder to its original position, raise it all the way (1) and

then close it slowly and carefully (2).

SCANNING BASICS

(2)

(1)

(2)

AB C

Book or Thick Document

1.96"(50 mm)

SCAN SETTINGS The DR-7080C is operated via the bundled ISIS/TWAIN driver, which

is compatible with a wide range of application software. Prior to

scanning, use the ISIS/TWAIN driver to select the scanning side,

feeding option, and any other setting you require.

▲

SCANNING BASICS

■ Standard:

Select this mode when you wish to use your application software to

start or stop scanning.

■ Panel:

Select this mode if you need to continuously scan multiple batches or

scan a book page by page. In this mode, scanning starts by pressing

the scanner’s built-in [Start] key.

■ Automatic:

For feeder use only. Select this mode to scan batches of documents

with the feeder. The scanner will start automatically when it detects a

document in the document feeder tray.

Feeding Option

Scanning Side

SCANNING SIDE

▲

FEEDING OPTION

▲

■ For feeder scanning: Select [Simplex] or [Duplex].

■ For flatbed scanning: Select [Flatbed].

SCANNING BASICS

To finish scanning, execute the required command from the application.

STEP 1Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.

▲

STANDARD FEEDING

STEP 2Place the document on the scanner.

▲

STEP 3From the application you are using, execute the required command to

start scanning.

▲

STEP 4When scanning of the document is complete, the application goes into

Ready Mode. If you wish to scan another document, repeat steps 2

and 3.

▲

PANEL FEEDING

SCANNING BASICS

STEP 1Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.

▲

STEP 2From the application you are using, execute the required command to

start scanning. The [Start] key lamp will turn green.

▲

STEP 3Place the document on the scanner.

▲

STEP 4Press the [Start] key.

▲

STEP 5When scanning of the document is complete, the scanner goes into

Ready Mode. If you wish to scan another document, repeat steps 3

and 4.

To finish scanning, press the [Stop] key.

▲

SCANNING BASICS

STEP 1Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.

▲

AUTOMATIC FEEDING

STEP 2From the application you are using, execute the required command to

start scanning. The [Start] key lamp will turn green.

▲

STEP 3Load the document into the document feeder tray. Scanning will start

automatically when the sensor on the document feeder tray detects

the document.

▲

STEP 4When scanning of the document is complete, the scanner goes into

Ready Mode. If you wish to scan another document, repeat step 3.

To finish scanning, press the [Stop] key.

▲

SCANNING BASICS

USING THE JOB MODE

Job functions provide an easy way to scan documents to specific

folders, printers, and e-mail addresses.

For further details on the Job function, refer to Chapter 4.4 of the DR-7080C

Instructions manual.

STEP 2Use the Job [▲] and [▼] keys to select the number of the job (01

through 99) you want.

▲

STEP 3Place the document on the scanner.

▲

STEP 4Press the [Start] key.

When scanning of the document is complete, press the [Stop] key to exit the Job Mode.

▲

STEP 1Press the Job [▲] key to enter the Job Mode.

▲

Autres manuels pour ImageFormula DR-7080C

Table des matières

Autres manuels Canon Scanner

Canon

Canon imageFORMULA DR-6030C Manuel utilisateur

Canon

Canon CanoScan LiDE 70 Manuel utilisateur

Canon

Canon 1321B002 Manuel utilisateur

Canon

Canon CP Printer Solution Disk Version 4 Manuel d'instructions

Canon

Canon 220P - imageFORMULA ScanFront Manuel utilisateur

Canon

Canon imageFORMULA ScanFront 400 Guide de configuration

Canon

Canon Optura 300 Manuel utilisateur

Canon

Canon imageFORMULA DR-S150 Manuel utilisateur

Canon

Canon imageFORMULA Manuel utilisateur

Canon

Canon ImageFORMULA 102 Manuel utilisateur

Canon

Canon imageFORMULA DR-2080C Manuel utilisateur

Canon

Canon imageFORMULA DR-2080C Manuel utilisateur

Canon

Canon ScanFront 300eP Manuel utilisateur

Canon

Canon imageFORMULA DR-S150 Manuel utilisateur

Canon

Canon FB620U - CanoScan - Flatbed Scanner Instructions d'installation

Canon

Canon CANOSCAN D1230 series Manuel utilisateur

Canon

Canon imageFORMULA DR-M140 Manuel utilisateur

Canon

Canon imagePROGRAF L24e Manuel utilisateur

Canon

Canon mageRUNNER ADVANCE C355iF Manuel utilisateur

Canon

Canon Microfilm Scanner 350II Manuel utilisateur

Canon

Canon DR 5010C - imageFORMULA - Document Scanner Instructions d'utilisation

Canon

Canon CanoScan 8000F Manuel utilisateur

Canon

Canon CanoScan 9000F Manuel utilisateur

Canon

Canon imageFORMULA DR-2580C Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur